Perfilagem

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1761)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1761)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1761)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1761)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1761)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1761)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1761)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1761)
  • M Stainless Steel (1651)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1651)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1651)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1651)
  • K Cast Iron (1583)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1583)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1579)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1574)
  • N Non-Ferrous Materials (1546)
    • N1
      Wrought Aluminum (1516)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1461)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (367)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1546)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1475)
    • N6
      Carbon, Graphite Composites, CFRP (1446)
    • N7
      MMC's (331)
  • S High-Temp Alloys (1713)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1713)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1713)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1713)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1690)
  • H Hardened Materials (1163)
    • H1
      Hardened Materials 44-48 HRC (1163)
    • H2
      Hardened Materials 48-55 HRC (1077)
    • H3
      Hardened Materials 56-60 HRC (356)
    • H4
      Hardened Materials >60 HRC (356)
  • C CFRP Materials (230)
    • C1
      CFRP, CFRP / CFRP (215)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (143)
Selecione First Choice
  • BR (23)
  • CN (190)
  • DE (190)
  • GB (108)
  • IN (33)
  • SG (67)
  • US (278)
Applications
Applications
  • Back Boring Back Boring (186)
  • Boring Boring (284)
  • CRT Profiling CRT Profiling (20)
  • Chamfer Turning Chamfer Turning (69)
  • Cut-Off Cut-Off (345)
  • Deep Grooving Deep Grooving (123)
  • Face Grooving Face Grooving (1003)
  • Facing Facing (263)
  • Grooving Grooving (1231)
  • ID Facing ID Facing (199)
  • ID Grooving ID Grooving (678)
  • ID Thread Turning ID Thread Turning (69)
  • Multiple Direction Cutting Multiple Direction Cutting (571)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (530)
  • Profiling Profiling (523)
  • TRN Boring TRN Boring (50)
  • Threading Threading (130)
  • Turning Turning (433)
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1167)
  • Lightly Interrupted Cut (1391)
  • Smooth Cut (1592)
  • Varying Depth of Cut (1445)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 60.0 (4)
  • 62.5 (2)
  • 72.5 (2)
  • 90.0 (820)
  • 92.25 (27)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (8)
  • Boring Bar Shank (212)
  • Toolholder (486)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (835)
  • 2.0 (1294)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.75 in (2)
  • 1.625 in (6)
  • 1.881 in (10)
  • 1.954 in (4)
  • 2.037 in (8)
  • 2.077 in (31)
  • 2.138 in (5)
  • 2.156 in (46)
  • 2.165 in (1)
  • 2.192 in (1)
  • 2.269 in (20)
  • 2.274 in (2)
  • 2.352 in (14)
  • 2.431 in (6)
  • 2.5 in (4)
  • 2.584 in (2)
  • 2.638 in (6)
  • 2.668 in (2)
  • 2.757 in (2)
  • 2.888 in (3)
  • 3.15 in (3)
  • 3.338 in (2)
  • 3.5 in (6)
  • 3.638 in (2)
  • 3.938 in (6)
  • 4.0 in (5)
  • 4.5 in (73)
  • 4.921 in (110)
  • 4.933 in (12)
  • 5.0 in (40)
  • 5.327 in (2)
  • 5.348 in (2)
  • 5.372 in (4)
  • 5.394 in (4)
  • 5.463 in (4)
  • 5.508 in (12)
  • 5.906 in (120)
  • 5.915 in (4)
  • 5.917 in (4)
  • 5.961 in (10)
  • 6.0 in (179)
  • 6.114 in (2)
  • 6.136 in (2)
  • 6.25 in (4)
  • 6.372 in (2)
  • 6.394 in (2)
  • 6.694 in (46)
  • 6.703 in (4)
  • 7.0 in (23)
  • 7.079 in (2)
  • 7.087 in (14)
  • 7.263 in (2)
  • 7.875 in (36)
  • 7.931 in (7)
  • 7.976 in (1)
  • 8.0 in (7)
  • 8.012 in (4)
  • 8.019 in (6)
  • 8.02 in (4)
  • 8.055 in (1)
  • 8.132 in (2)
  • 8.15 in (1)
  • 9.843 in (20)
  • 9.879 in (1)
  • 10.0 in (15)
  • 10.02 in (3)
  • 10.025 in (1)
  • 10.063 in (2)
  • 10.095 in (2)
  • 11.811 in (12)
  • 12.0 in (14)
  • 12.02 in (3)
  • 12.025 in (2)
  • 13.781 in (2)
  • 14.0 in (12)
  • 14.07 in (1)
  • 16.0 in (10)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 19.05 mm (2)
  • 41.276 mm (6)
  • 47.75 mm (10)
  • 49.625 mm (4)
  • 51.75 mm (8)
  • 52.75 mm (31)
  • 54.301 mm (5)
  • 54.75 mm (46)
  • 55.0 mm (1)
  • 55.676 mm (1)
  • 57.625 mm (20)
  • 57.75 mm (2)
  • 59.75 mm (14)
  • 61.75 mm (6)
  • 63.5 mm (4)
  • 65.625 mm (2)
  • 67.0 mm (6)
  • 67.75 mm (2)
  • 70.0 mm (2)
  • 73.351 mm (3)
  • 80.0 mm (3)
  • 84.775 mm (2)
  • 88.9 mm (6)
  • 92.4 mm (2)
  • 100.0 mm (6)
  • 101.601 mm (5)
  • 114.301 mm (73)
  • 125.0 mm (110)
  • 125.301 mm (12)
  • 127.0 mm (40)
  • 135.3 mm (2)
  • 135.85 mm (2)
  • 136.451 mm (4)
  • 137.0 mm (4)
  • 138.75 mm (4)
  • 139.9 mm (12)
  • 150.0 mm (120)
  • 150.25 mm (4)
  • 150.3 mm (4)
  • 151.4 mm (10)
  • 152.4 mm (179)
  • 155.3 mm (2)
  • 155.851 mm (2)
  • 158.75 mm (4)
  • 161.851 mm (2)
  • 162.4 mm (2)
  • 170.0 mm (46)
  • 170.25 mm (4)
  • 177.8 mm (23)
  • 179.8 mm (2)
  • 180.0 mm (14)
  • 184.451 mm (2)
  • 200.0 mm (36)
  • 201.451 mm (7)
  • 202.601 mm (1)
  • 203.201 mm (7)
  • 203.5 mm (4)
  • 203.675 mm (6)
  • 203.701 mm (4)
  • 204.601 mm (1)
  • 206.55 mm (2)
  • 207.0 mm (1)
  • 250.0 mm (20)
  • 250.925 mm (1)
  • 254.0 mm (15)
  • 254.5 mm (3)
  • 254.601 mm (1)
  • 255.601 mm (2)
  • 256.401 mm (2)
  • 300.0 mm (12)
  • 304.8 mm (14)
  • 305.3 mm (3)
  • 305.401 mm (2)
  • 350.0 mm (2)
  • 355.6 mm (12)
  • 357.375 mm (1)
  • 406.401 mm (10)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.003 in (187)
  • 0.004 in (146)
  • 0.005 in (159)
  • 0.006 in (114)
  • 0.007 in (150)
  • 0.008 in (699)
  • 0.01 in (150)
  • 0.011 in (78)
  • 0.012 in (142)
  • 0.014 in (117)
  • 0.016 in (746)
  • 0.019 in (114)
  • 0.02 in (241)
  • 0.023 in (117)
  • 0.03 in (70)
  • 0.031 in (727)
  • 0.033 in (11)
  • 0.034 in (62)
  • 0.035 in (114)
  • 0.039 in (371)
  • 0.041 in (138)
  • 0.046 in (18)
  • 0.047 in (395)
  • 0.048 in (18)
  • 0.049 in (147)
  • 0.06 in (304)
  • 0.061 in (49)
  • 0.062 in (92)
  • 0.063 in (418)
  • 0.065 in (47)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (233)
  • 0.08 in (70)
  • 0.081 in (51)
  • 0.089 in (114)
  • 0.094 in (141)
  • 0.095 in (159)
  • 0.096 in (50)
  • 0.098 in (135)
  • 0.099 in (59)
  • 0.1 in (43)
  • 0.119 in (98)
  • 0.12 in (102)
  • 0.125 in (203)
  • 0.128 in (38)
  • 0.156 in (47)
  • 0.157 in (46)
  • 0.158 in (51)
  • 0.159 in (29)
  • 0.187 in (8)
  • 0.188 in (36)
  • 0.197 in (11)
  • 0.198 in (13)
  • 0.25 in (16)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.076 mm (187)
  • 0.1 mm (146)
  • 0.125 mm (159)
  • 0.151 mm (114)
  • 0.176 mm (150)
  • 0.2 mm (699)
  • 0.225 mm (78)
  • 0.25 mm (150)
  • 0.275 mm (78)
  • 0.301 mm (142)
  • 0.325 mm (117)
  • 0.351 mm (114)
  • 0.4 mm (746)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (241)
  • 0.576 mm (117)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.8 mm (518)
  • 0.826 mm (11)
  • 0.851 mm (62)
  • 0.9 mm (114)
  • 1.0 mm (371)
  • 1.05 mm (138)
  • 1.175 mm (18)
  • 1.201 mm (395)
  • 1.225 mm (18)
  • 1.25 mm (147)
  • 1.5 mm (294)
  • 1.526 mm (86)
  • 1.55 mm (49)
  • 1.576 mm (92)
  • 1.6 mm (418)
  • 1.651 mm (47)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (233)
  • 2.025 mm (70)
  • 2.051 mm (51)
  • 2.25 mm (114)
  • 2.375 mm (141)
  • 2.401 mm (159)
  • 2.45 mm (50)
  • 2.5 mm (135)
  • 2.526 mm (59)
  • 2.551 mm (43)
  • 3.0 mm (98)
  • 3.026 mm (59)
  • 3.051 mm (43)
  • 3.176 mm (203)
  • 3.25 mm (38)
  • 3.95 mm (27)
  • 3.975 mm (20)
  • 4.0 mm (46)
  • 4.025 mm (51)
  • 4.05 mm (29)
  • 4.75 mm (8)
  • 4.775 mm (36)
  • 5.0 mm (11)
  • 5.025 mm (13)
  • 6.351 mm (16)
Corner Radius Min a Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1163)
Corner Chamfer Min a Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1163)
Corner Chamfer Min a Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K1 (5)
  • K1025 (131)
  • K2885 (146)
  • K313 (936)
  • K420 (262)
  • K4H (110)
  • K6 (4)
  • K68 (341)
  • K8735 (29)
  • KB1345 (139)
  • KB1630 (356)
  • KB5625 (316)
  • KBH20 (278)
  • KC250 (233)
  • KC5010 (787)
  • KC5025 (739)
  • KC5410 (328)
  • KC5510 (20)
  • KC710 (182)
  • KC720 (216)
  • KC722 (182)
  • KC730 (414)
  • KC7310 (139)
  • KC732 (224)
  • KC8050 (152)
  • KC810 (298)
  • KC850 (353)
  • KC9025 (94)
  • KC910 (251)
  • KC9105 (62)
  • KC9110 (632)
  • KC9120 (112)
  • KC9125 (437)
  • KC9225 (152)
  • KC9315 (89)
  • KC9320 (182)
  • KC935 (328)
  • KC950 (276)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCK20 (412)
  • KCK20B (425)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCM35B (162)
  • KCP05 (93)
  • KCP10 (448)
  • KCP10B (522)
  • KCP25 (449)
  • KCP25B (574)
  • KCP25C (132)
  • KCS10 (56)
  • KCS10B (89)
  • KCU10 (1096)
  • KCU10B (870)
  • KCU25 (1051)
  • KCU25B (342)
  • KD050 (122)
  • KD081 (107)
  • KD100 (191)
  • KD120 (200)
  • KD1405 (188)
  • KD1425 (179)
  • KMS (125)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (199)
  • KT315 (643)
  • KU10 (336)
  • KU10T (182)
  • KU25T (182)
  • KU30T (420)
  • KY3000 (114)
  • KY3500 (269)
  • KYS30 (120)
  • SP88F8 (51)
Hand Of Tool
Hand Of Tool
  • L (333)
  • N (14)
  • R (411)
Wiper Insert
Wiper Insert
  • N (1782)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 8.175 mm (1)
  • 8.225 mm (2)
  • 8.525 mm (4)
  • 8.875 mm (2)
  • 9.0 mm (6)
  • 9.4 mm (2)
  • 9.525 mm (6)
  • 9.75 mm (1)
  • 10.0 mm (1)
  • 10.226 mm (1)
  • 10.25 mm (1)
  • 10.3 mm (1)
  • 10.775 mm (1)
  • 10.875 mm (1)
  • 10.976 mm (2)
  • 11.0 mm (11)
  • 11.05 mm (7)
  • 11.101 mm (2)
  • 12.0 mm (1)
  • 12.101 mm (2)
  • 12.175 mm (2)
  • 12.226 mm (1)
  • 12.5 mm (1)
  • 12.576 mm (6)
  • 12.625 mm (1)
  • 12.701 mm (9)
  • 12.726 mm (3)
  • 12.75 mm (2)
  • 12.8 mm (4)
  • 12.851 mm (2)
  • 12.9 mm (2)
  • 13.0 mm (17)