Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Tem uma pergunta específica sobre o produto?

Veja uma lista completa de profissionais de serviços globais por área de especialização

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Brocas modulares

Selecionar filtros
Filters
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2590)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2579)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2579)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (2579)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (2579)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (2383)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (2385)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (2356)
  • M Stainless Steel (2145)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (2145)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (2145)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (2070)
  • K Cast Iron (2380)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (2380)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (2380)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (2380)
  • N Non-Ferrous Materials (1389)
    • N1
      Wrought Aluminum (1388)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1388)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (1388)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1374)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1127)
    • N6
      Carbon, Graphite Composites, CFRP (1118)
    • N7
      MMC's (1114)
  • S High-Temp Alloys (1842)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1815)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1815)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1815)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1842)
  • H Hardened Materials (133)
    • H1
      Hardened Materials 44-48 HRC (133)
    • H2
      Hardened Materials 48-55 HRC (29)
    • H3
      Hardened Materials 56-60 HRC (29)
    • H4
      Hardened Materials >60 HRC (29)
  • C CFRP Materials (186)
    • C1
      CFRP, CFRP / CFRP (72)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (181)
    • C3
      CFRP / Titanium CFRP / High Temp (181)
    • C4
      CFRP / Stainless Steel (181)
Selecione First Choice
  • BR (130)
  • CN (624)
  • DE (667)
  • GB (417)
  • IN (236)
  • SG (300)
  • US (709)
Applications
Applications
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Counterboring Counterboring (40)
  • Countersinking Countersinking (82)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (1142)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (555)
  • Inclined Exit Drilling Inclined Exit Drilling (555)
  • Stacked Plates Drilling Stacked Plates Drilling (945)
  • X-Offset Drilling X-Offset Drilling (6)
Cutting Diameter
Cutting Diameter
  • 0.237 in (13)
  • 0.24 in (9)
  • 0.244 in (10)
  • 0.248 in (9)
  • 0.25 in (16)
  • 0.252 in (9)
  • 0.256 in (13)
  • 0.257 in (10)
  • 0.26 in (9)
  • 0.261 in (10)
  • 0.264 in (9)
  • 0.266 in (11)
  • 0.268 in (14)
  • 0.272 in (10)
  • 0.276 in (13)
  • 0.28 in (9)
  • 0.281 in (10)
  • 0.284 in (9)
  • 0.288 in (9)
  • 0.29 in (9)
  • 0.291 in (9)
  • 0.295 in (13)
  • 0.297 in (9)
  • 0.299 in (10)
  • 0.303 in (9)
  • 0.307 in (10)
  • 0.311 in (9)
  • 0.313 in (17)
  • 0.315 in (22)
  • 0.319 in (20)
  • 0.322 in (17)
  • 0.323 in (20)
  • 0.327 in (18)
  • 0.328 in (19)
  • 0.331 in (18)
  • 0.332 in (17)
  • 0.335 in (22)
  • 0.336 in (17)
  • 0.339 in (21)
  • 0.343 in (20)
  • 0.345 in (19)
  • 0.347 in (19)
  • 0.349 in (17)
  • 0.351 in (19)
  • 0.354 in (22)
  • 0.358 in (21)
  • 0.359 in (17)
  • 0.362 in (18)
  • 0.366 in (18)
  • 0.368 in (18)
  • 0.37 in (19)
  • 0.374 in (21)
  • 0.375 in (24)
  • 0.376 in (19)
  • 0.378 in (20)
  • 0.382 in (20)
  • 0.386 in (20)
  • 0.39 in (19)
  • 0.391 in (19)
  • 0.394 in (23)
  • 0.395 in (18)
  • 0.397 in (18)
  • 0.398 in (20)
  • 0.402 in (22)
  • 0.404 in (18)
  • 0.406 in (21)
  • 0.408 in (21)
  • 0.41 in (20)
  • 0.414 in (39)
  • 0.417 in (20)
  • 0.421 in (20)
  • 0.422 in (19)
  • 0.425 in (21)
  • 0.429 in (19)
  • 0.433 in (21)
  • 0.437 in (23)
  • 0.438 in (22)
  • 0.441 in (19)
  • 0.445 in (18)
  • 0.449 in (18)
  • 0.453 in (24)
  • 0.457 in (19)
  • 0.461 in (18)
  • 0.465 in (21)
  • 0.47 in (22)
  • 0.473 in (22)
  • 0.477 in (19)
  • 0.48 in (20)
  • 0.484 in (22)
  • 0.488 in (19)
  • 0.491 in (19)
  • 0.492 in (36)
  • 0.496 in (26)
  • 0.5 in (46)
  • 0.504 in (38)
  • 0.508 in (19)
  • 0.509 in (25)
  • 0.512 in (59)
  • 0.516 in (45)
  • 0.52 in (47)
  • 0.523 in (17)
  • 0.524 in (19)
  • 0.527 in (17)
  • 0.528 in (18)
  • 0.531 in (71)
  • 0.535 in (29)
  • 0.539 in (27)
  • 0.543 in (31)
  • 0.547 in (32)
  • 0.549 in (18)
  • 0.551 in (53)
  • 0.555 in (38)
  • 0.557 in (13)
  • 0.559 in (35)
  • 0.564 in (44)
  • 0.568 in (34)
  • 0.572 in (45)
  • 0.576 in (29)
  • 0.578 in (33)
  • 0.579 in (17)
  • 0.583 in (37)
  • 0.587 in (17)
  • 0.591 in (59)
  • 0.594 in (37)
  • 0.595 in (21)
  • 0.598 in (21)
  • 0.602 in (36)
  • 0.605 in (18)
  • 0.606 in (18)
  • 0.609 in (40)
  • 0.61 in (53)
  • 0.614 in (37)
  • 0.618 in (34)
  • 0.622 in (37)
  • 0.625 in (36)
  • 0.626 in (18)
  • 0.63 in (52)
  • 0.631 in (17)
  • 0.632 in (15)
  • 0.633 in (17)
  • 0.634 in (43)
  • 0.636 in (38)
  • 0.638 in (44)
  • 0.641 in (44)
  • 0.642 in (19)
  • 0.646 in (18)
  • 0.65 in (47)
  • 0.652 in (17)
  • 0.654 in (34)
  • 0.656 in (40)
  • 0.657 in (18)
  • 0.661 in (18)
  • 0.665 in (18)
  • 0.669 in (54)
  • 0.672 in (37)
  • 0.673 in (19)
  • 0.677 in (19)
  • 0.681 in (19)
  • 0.683 in (10)
  • 0.685 in (18)
  • 0.687 in (35)
  • 0.689 in (19)
  • 0.69 in (49)
  • 0.692 in (16)
  • 0.694 in (33)
  • 0.698 in (35)
  • 0.7 in (14)
  • 0.702 in (33)
  • 0.704 in (38)
  • 0.705 in (34)
  • 0.709 in (43)
  • 0.713 in (19)
  • 0.717 in (17)
  • 0.719 in (34)
  • 0.72 in (28)
  • 0.724 in (27)
  • 0.728 in (41)
  • 0.732 in (31)
  • 0.734 in (35)
  • 0.736 in (19)
  • 0.74 in (28)
  • 0.744 in (28)
  • 0.748 in (63)
  • 0.75 in (49)
  • 0.752 in (16)
  • 0.756 in (40)
  • 0.757 in (40)
  • 0.758 in (41)
  • 0.759 in (43)
  • 0.76 in (16)
  • 0.761 in (26)
  • 0.762 in (43)
  • 0.763 in (25)
  • 0.764 in (15)
  • 0.766 in (49)
  • 0.768 in (59)
  • 0.772 in (15)
  • 0.774 in (15)
  • 0.776 in (31)
  • 0.78 in (17)
  • 0.781 in (34)
  • 0.784 in (16)
  • 0.787 in (32)
  • 0.788 in (7)
  • 0.791 in (18)
  • 0.795 in (10)
  • 0.797 in (23)
  • 0.799 in (10)
  • 0.801 in (11)
  • 0.807 in (34)
  • 0.811 in (10)
  • 0.814 in (33)
  • 0.816 in (26)
  • 0.82 in (9)
  • 0.824 in (9)
  • 0.828 in (52)
  • 0.832 in (24)
  • 0.833 in (18)
  • 0.835 in (19)
  • 0.839 in (9)
  • 0.84 in (10)
  • 0.843 in (9)
  • 0.844 in (22)
  • 0.846 in (37)
  • 0.854 in (22)
  • 0.858 in (10)
  • 0.859 in (28)
  • 0.862 in (9)
  • 0.866 in (37)
  • 0.87 in (16)
  • 0.872 in (6)
  • 0.874 in (10)
  • 0.875 in (37)
  • 0.882 in (9)
  • 0.884 in (32)
  • 0.886 in (47)
  • 0.89 in (9)
  • 0.891 in (25)
  • 0.894 in (9)
  • 0.897 in (12)
  • 0.898 in (10)
  • 0.902 in (9)
  • 0.906 in (40)
  • 0.907 in (12)
  • 0.909 in (21)
  • 0.913 in (10)
  • 0.915 in (12)
  • 0.917 in (21)
  • 0.921 in (9)
  • 0.922 in (29)
  • 0.925 in (39)
  • 0.929 in (18)
  • 0.933 in (20)
  • 0.937 in (28)
  • 0.942 in (9)
  • 0.946 in (39)
  • 0.95 in (9)
  • 0.954 in (9)
  • 0.958 in (15)
  • 0.961 in (9)
  • 0.965 in (29)
  • 0.969 in (28)
  • 0.972 in (23)
  • 0.976 in (9)
  • 0.98 in (9)
  • 0.984 in (63)
  • 0.987 in (29)
  • 0.988 in (9)
  • 0.992 in (9)
  • 0.994 in (23)
  • 0.996 in (23)
  • 1.0 in (46)
  • 1.004 in (50)
  • 1.006 in (28)
  • 1.008 in (34)
  • 1.01 in (32)
  • 1.012 in (38)
  • 1.014 in (26)
  • 1.016 in (39)
  • 1.02 in (9)
  • 1.024 in (37)
  • 1.032 in (14)
  • 1.035 in (11)
  • 1.043 in (21)
  • 1.044 in (10)
  • 1.047 in (12)
  • 1.051 in (11)
  • 1.063 in (28)
  • 1.083 in (21)
  • 1.094 in (10)
  • 1.102 in (25)
  • 1.106 in (6)
  • 1.109 in (12)
  • 1.116 in (9)
  • 1.122 in (22)
  • 1.125 in (24)
  • 1.143 in (34)
  • 1.156 in (19)
  • 1.161 in (24)
  • 1.163 in (12)
  • 1.17 in (13)
  • 1.172 in (18)
  • 1.181 in (24)
  • 1.187 in (11)
  • 1.188 in (2)
  • 1.201 in (24)
  • 1.203 in (15)
  • 1.219 in (15)
  • 1.22 in (27)
  • 1.226 in (12)
  • 1.23 in (11)
  • 1.24 in (15)
  • 1.25 in (29)
  • 1.26 in (36)
  • 1.268 in (8)
  • 1.274 in (8)
  • 1.28 in (11)
  • 1.282 in (13)
  • 1.297 in (13)
  • 1.299 in (32)
  • 1.307 in (2)
  • 1.313 in (20)
  • 1.315 in (18)
  • 1.319 in (19)
  • 1.328 in (18)
  • 1.339 in (35)
  • 1.344 in (21)
  • 1.358 in (21)
  • 1.375 in (26)
  • 1.379 in (35)
  • 1.399 in (22)
  • 1.407 in (25)
  • 1.417 in (36)
  • 1.422 in (11)
  • 1.437 in (14)
  • 1.438 in (2)
  • 1.457 in (28)
  • 1.469 in (16)
  • 1.476 in (23)
  • 1.496 in (37)
  • 1.5 in (24)
  • 1.514 in (24)
  • 1.516 in (23)
  • 1.536 in (35)
  • 1.543 in (21)
  • 1.555 in (19)
  • 1.563 in (2)
  • 1.565 in (17)
  • 1.575 in (31)
  • 1.614 in (2)
  • 1.625 in (2)
  • 1.655 in (2)
  • 1.693 in (2)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.772 in (2)
  • 1.811 in (2)
  • 1.85 in (2)
  • 1.875 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (2)
  • 2.126 in (2)
  • 2.165 in (2)
  • 2.205 in (2)
  • 2.244 in (2)
  • 2.25 in (2)
  • 2.283 in (2)
  • 2.323 in (2)
  • 2.362 in (4)
  • 2.375 in (2)
  • 2.402 in (2)
  • 2.441 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.559 in (2)
  • 2.598 in (2)
  • 2.625 in (2)
  • 2.638 in (2)
  • 2.677 in (2)
  • 2.717 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 2.795 in (2)
  • 2.835 in (2)
  • 2.874 in (2)
  • 2.875 in (2)
  • 2.914 in (2)
  • 2.953 in (4)
  • 2.992 in (2)
  • 3.0 in (2)
  • 3.071 in (2)
  • 3.125 in (2)
  • 3.15 in (2)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (2)
  • 3.307 in (2)
  • 3.346 in (1)
  • 3.375 in (1)
  • 3.386 in (2)
  • 3.426 in (2)
  • 3.465 in (1)
  • 3.5 in (2)
  • 3.504 in (1)
  • 3.543 in (4)
  • 3.622 in (2)
  • 3.625 in (1)
  • 3.701 in (1)
  • 3.74 in (2)
  • 3.75 in (2)
  • 3.781 in (2)
  • 3.858 in (1)
  • 3.875 in (1)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.0 in (2)
Cutting Diameter Min a Cutting Diameter Max