successfully added to cart
View Cart

Notifications

Mark all as read
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters

7792VXD09 Weldon Shank • Inch

High-Feed Milling Cutters

Features and benefits

  • Ultra-fine pitch cutters available to increase material removal rates, especially on high-temp alloys.

  • Positive design to support lower cutting forces and long overhang usage.

  • Ramping and plunge milling capabilities.

Uses and application

  • Fresamento de faceFresamento de face
  • Fresamento de rampa: blankFresamento de rampa: blank
  • Fresamento helicoidalFresamento helicoidal
  • Fresamento de cavidadeFresamento de cavidade
  • Fresamento de mergulho: ponta esféricaFresamento de mergulho: ponta esférica
  • RebaixamentoRebaixamento
  • Slotting: ShoulderSlotting: Shoulder
  • Spiral CircularSpiral Circular
  • Inclined Square End MillInclined Square End Mill
  • Fresamento —   Refrigeração internaFresamento — Refrigeração interna
  • Haste —  Cilíndrica  WeldonHaste — Cilíndrica Weldon

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Mais contatos
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
Select First Choice
  • US (2)
Applications
Applications
  • Face Milling Face Milling (2)
  • Pocket Pocket (2)
  • Pocket Helical Pocket Helical (2)
  • Pocket Milling Pocket Milling (2)
  • Pocket Plunge Milling Pocket Plunge Milling (2)
  • Profile Milling Profile Milling (2)
  • Ramping Ramping (2)
  • Slot Milling Slot Milling (1)
  • Slot Side Slot Side (1)
Cutting Diameter
Cutting Diameter
  • 0.4874 in (1)
  • 0.7384 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.379 mm (1)
  • 18.756 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.4 mm (1)
  • 31.55 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.0 in (1)
  • 1.2421 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Reach
Reach
  • 1.574 in (1)
  • 1.5748 in (1)
Reach Min to Reach Max
Reach
Reach
  • 39.98 mm (1)
  • 40.0 mm (1)
Reach Min to Reach Max
Number of Flutes
Number of Flutes
  • 2 (1)
  • 3 (1)
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (2)
  • 0.0314 in (2)
  • 0.0315 in (2)
  • 0.047 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.798 mm (2)
  • 0.8 mm (2)
  • 1.194 mm (2)
  • 1.2 mm (2)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • GH2 (2)
  • KC510M (2)
  • KC522M (2)
  • KC725M (2)
  • KCK15 (2)
  • KCPK30 (2)
  • KCPM40 (2)
  • KCSM40 (2)
  • SC3025 (2)
  • SC6525 (2)
  • SP2019 (2)
  • SP4019 (2)
  • SP4659 (2)
  • SP6519 (2)
  • X400 (2)
  • X500 (2)
  • X700 (2)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.5 (1)
  • 2.7 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.827 in (1)
  • 1.058 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 26.87 mm (1)
Neck Diameter Min to Neck Diameter Max
backEnd
Back-End Diameter
Back-End Diameter
  • 25.4 mm (1)
  • 31.75 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.0 in (1)
  • 1.25 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • High-Feed Series
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Mais contatos
Show
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Metric
Mais contatos
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
5658075 C7792VXD09WA1.00Z2R C7792VXD09WA1.00Z2R   25.4000 1.000 25.4 1.0 97.9120 3.854 40.0000 1.574 1.5000 .0591 2
    List price:
    $321.27 /each.
    Your price::
    Qty
    5666067 C7792VXD09WA1.25Z3R C7792VXD09WA1.25Z3R 31.5500 1.242 31.75 1.25 97.8920 3.854 39.9800 1.574 1.5000 .0591 3  
      List price:
      $382.56 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      Grades

      product-image
      Please adjust the following properties from

      ISO catálogo

      ANSI catálogo

      to find similar products.
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      The following CAD files are available

      Please select a file to download

      You should be logged to see your dashboard information
      Session expired due to inactivity, please login again
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart