Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Fresar mais por menos com nossas ofertas por tempo limitado! Compre agora

Beyond Evolution Integral Holders

Selecionar filtros
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (253)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (253)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (253)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (253)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (253)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (253)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (253)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (253)
  • M Stainless Steel (253)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (253)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (253)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (253)
  • K Cast Iron (253)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (253)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (253)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (253)
  • N Non-Ferrous Materials (253)
    • N1
      Wrought Aluminum (253)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (253)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (253)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (253)
    • N6
      Carbon, Graphite Composites, CFRP (253)
  • S High-Temp Alloys (253)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (253)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (253)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (253)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (253)
  • H Hardened Materials (253)
    • H1
      Hardened Materials 44-48 HRC (253)
    • H2
      Hardened Materials 48-55 HRC (253)
Applications
Applications
  • Cut-Off Cut-Off (253)
  • Face Grooving Face Grooving (221)
  • Grooving Grooving (253)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (253)
  • Lightly Interrupted Cut (253)
  • Smooth Cut (253)
  • Varying Depth of Cut (253)
Over All Length [L]
Over All Length [L]
  • 4.5 in (20)
  • 4.921 in (20)
  • 5.906 in (89)
  • 6.0 in (108)
  • 6.694 in (16)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 114.301 mm (20)
  • 125.0 mm (20)
  • 150.0 mm (89)
  • 152.4 mm (108)
  • 170.0 mm (16)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (117)
  • 0.012 in (136)
  • 0.016 in (253)
  • 0.031 in (189)
  • 0.06 in (64)
  • 0.061 in (64)
  • 0.063 in (64)
  • 0.065 in (64)
  • 0.079 in (53)
  • 0.081 in (53)
  • 0.094 in (53)
  • 0.096 in (53)
  • 0.098 in (72)
  • 0.1 in (72)
  • 0.119 in (64)
  • 0.12 in (64)
  • 0.125 in (64)
  • 0.128 in (64)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (117)
  • 0.301 mm (136)
  • 0.4 mm (253)
  • 0.8 mm (189)
  • 1.5 mm (64)
  • 1.55 mm (64)
  • 1.6 mm (64)
  • 1.651 mm (64)
  • 2.0 mm (53)
  • 2.051 mm (53)
  • 2.375 mm (53)
  • 2.45 mm (53)
  • 2.5 mm (72)
  • 2.551 mm (72)
  • 3.0 mm (64)
  • 3.051 mm (64)
  • 3.176 mm (64)
  • 3.25 mm (64)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (253)
  • KCK20B (253)
  • KCM35B (189)
  • KCP10B (253)
  • KCP25B (253)
  • KCU10 (253)
  • KCU10B (253)
  • KCU25 (253)
  • KCU25B (253)
Hand Of Tool
Hand Of Tool
  • L (127)
  • R (126)
F Dimension
F Dimension
  • 19.201 mm (20)
  • 20.175 mm (20)
  • 25.175 mm (48)
  • 25.201 mm (41)
  • 25.55 mm (69)
  • 25.576 mm (23)
  • 31.901 mm (8)
  • 31.925 mm (8)
  • 32.15 mm (8)
  • 32.176 mm (8)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.756 in (20)
  • 0.794 in (20)
  • 0.991 in (48)
  • 0.992 in (41)
  • 1.006 in (69)
  • 1.008 in (23)
  • 1.256 in (8)
  • 1.258 in (8)
  • 1.266 in (8)
  • 1.268 in (8)
F Dimension Min a F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 30.0 mm (4)
  • 35.0 mm (4)
  • 40.0 mm (8)
  • 50.0 mm (16)
  • 60.0 mm (32)
  • 75.0 mm (32)
  • 100.0 mm (40)
  • 180.0 mm (40)
  • 250.0 mm (38)
  • 350.0 mm (39)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.181 in (4)
  • 1.379 in (4)
  • 1.575 in (8)
  • 1.969 in (16)
  • 2.362 in (32)
  • 2.953 in (32)
  • 3.938 in (40)
  • 7.087 in (40)
  • 9.843 in (38)
  • 13.781 in (39)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.379 in (4)
  • 1.575 in (4)
  • 1.969 in (8)
  • 2.362 in (18)
  • 2.953 in (30)
  • 3.938 in (32)
  • 7.087 in (40)
  • 9.843 in (40)
  • 13.781 in (38)
  • 39.331 in (39)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 35.0 mm (4)
  • 40.0 mm (4)
  • 50.0 mm (8)
  • 60.0 mm (18)
  • 75.0 mm (30)
  • 100.0 mm (32)
  • 180.0 mm (40)
  • 250.0 mm (40)
  • 350.0 mm (38)
  • 999.0 mm (39)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (221)
frontEnd
Cutting Width
Cutting Width
  • 0.119 in (64)
  • 0.123 in (64)
  • 0.125 in (64)
  • 0.13 in (64)
  • 0.157 in (53)
  • 0.161 in (64)
  • 0.162 in (53)
  • 0.187 in (53)
  • 0.188 in (53)
  • 0.192 in (53)
  • 0.197 in (72)
  • 0.202 in (72)
  • 0.237 in (64)
  • 0.241 in (64)
  • 0.25 in (64)
  • 0.255 in (64)
  • 0.276 in (64)
  • 0.281 in (64)
  • 0.289 in (64)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 3.0 mm (64)
  • 3.125 mm (64)
  • 3.176 mm (64)
  • 3.301 mm (64)
  • 4.0 mm (53)
  • 4.101 mm (64)
  • 4.125 mm (53)
  • 4.75 mm (53)
  • 4.775 mm (53)
  • 4.875 mm (53)
  • 5.0 mm (72)
  • 5.125 mm (72)
  • 6.0 mm (64)
  • 6.125 mm (64)
  • 6.351 mm (64)
  • 6.476 mm (64)
  • 7.0 mm (64)
  • 7.125 mm (64)
  • 7.325 mm (64)
Cutting Width Min a Cutting Width Max
Insert Size
Insert Size
  • 3 (64)
  • 4 (53)
  • 5 (72)
  • 6 (64)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.473 in (40)
  • 0.63 in (81)
  • 0.787 in (24)
  • 1.024 in (76)
  • 1.26 in (32)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 12.0 mm (40)
  • 16.0 mm (81)
  • 20.0 mm (24)
  • 26.0 mm (76)
  • 32.0 mm (32)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
Minimum Groove Diameter
Minimum Groove Diameter
  • 1.181 in (4)
  • 1.379 in (4)
  • 1.575 in (8)
  • 1.969 in (16)
  • 2.362 in (32)
  • 2.953 in (32)
  • 3.938 in (40)
  • 7.087 in (40)
  • 9.843 in (38)
  • 13.781 in (39)
Minimum Groove Diameter Min a Minimum Groove Diameter Max
Minimum Groove Diameter
Minimum Groove Diameter
  • 30.0 mm (4)
  • 35.0 mm (4)
  • 40.0 mm (8)
  • 50.0 mm (16)
  • 60.0 mm (32)
  • 75.0 mm (32)
  • 100.0 mm (40)
  • 180.0 mm (40)
  • 250.0 mm (38)
  • 350.0 mm (39)
Minimum Groove Diameter Min a Minimum Groove Diameter Max
Maximum Groove Diameter
Maximum Groove Diameter
  • 35.0 mm (4)
  • 40.0 mm (4)
  • 50.0 mm (8)
  • 60.0 mm (18)
  • 75.0 mm (30)
  • 100.0 mm (32)
  • 180.0 mm (40)
  • 250.0 mm (40)
  • 350.0 mm (38)
  • 999.0 mm (39)
Maximum Groove Diameter Min a Maximum Groove Diameter Max
Maximum Groove Diameter
Maximum Groove Diameter
  • 1.379 in (4)
  • 1.575 in (4)
  • 1.969 in (8)
  • 2.362 in (18)
  • 2.953 in (30)
  • 3.938 in (32)
  • 7.087 in (40)
  • 9.843 in (40)
  • 13.781 in (38)
  • 39.331 in (39)
Maximum Groove Diameter Min a Maximum Groove Diameter Max
backEnd
Shank Height
Shank Height
  • 0.75 in (20)
  • 0.787 in (20)
  • 0.984 in (89)
  • 1.0 in (92)
  • 1.25 in (16)
  • 1.26 in (16)
Shank Height Min a Shank Height Max
Shank Height
Shank Height
  • 19.05 mm (20)
  • 20.0 mm (20)
  • 25.0 mm (89)
  • 25.401 mm (92)
  • 31.75 mm (16)
  • 32.0 mm (16)
Shank Height Min a Shank Height Max
Shank Width
Shank Width
  • 0.75 in (20)
  • 0.787 in (20)
  • 0.984 in (89)
  • 1.0 in (92)
  • 1.25 in (16)
  • 1.26 in (16)
Shank Width Min a Shank Width Max
Shank Width
Shank Width
  • 19.05 mm (20)
  • 20.0 mm (20)
  • 25.0 mm (89)
  • 25.401 mm (92)
  • 31.75 mm (16)
  • 32.0 mm (16)
Shank Width Min a Shank Width Max
No filters matching ""

Beyond™ Evolution™ • Integral Toolholder • Face Grooving • External • Through Coolant • Inch

(128) Beyond™ Evolution™ • Integral Toolholder • Face Grooving • External • Through Coolant • Inch

Beyond™ Evolution™ • Porta-ferramenta integral • Canal de face • Externo •
Refrigeração através da ferramenta

(125) Beyond<StartNumerator/>™ Evolution™ • Porta-ferramenta integral • Canal de face • Externo • <br />Refrigeração através da ferramenta
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

Models

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Obrigado pelo seu registro bem-sucedido. Agora você tem acesso imediato para fazer login e pode utilizar o site.

You are about to leave the Solution building process.

Are you sure you want to leave?