Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Popular Categories

Browse All Clearance Center Products

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (201)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (197)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (197)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (196)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (199)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (191)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (185)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (179)
  • M Stainless Steel (168)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (168)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (159)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (160)
  • K Cast Iron (175)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (167)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (172)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (158)
  • N Non-Ferrous Materials (107)
    • N1
      Wrought Aluminum
      (107)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (106)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (85)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (102)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (89)
    • N6
      Carbon, Graphite Composites, CFRP
      (88)
    • N7
      MMC's
      (85)
  • S High-Temp Alloys (141)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (138)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (140)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (139)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (125)
  • H Hardened Materials (113)
    • H1
      Hardened Materials 44-48 HRC
      (113)
    • H2
      Hardened Materials 48-55 HRC
      (86)
    • H3
      Hardened Materials 56-60 HRC
      (84)
    • H4
      Hardened Materials >60 HRC
      (75)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (57)
  • Blind Hole Finishing Blind Hole Finishing (61)
  • Boring Boring (1)
  • Chamfer Milling Chamfer Milling (1)
  • Convex Drilling Convex Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cross Hole Drilling Cross Hole Drilling (7)
  • Drilling Drilling (47)
  • Face Grooving Face Grooving (4)
  • Face Milling Face Milling (21)
  • Facing Facing (6)
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (24)
  • Inclined Exit Drilling Inclined Exit Drilling (5)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • OD Thread Turning OD Thread Turning (2)
  • Pipe Thread Pipe Thread (1)
  • Plunge Turning Plunge Turning (1)
  • Pocket Pocket (82)
  • Pocket Helical Pocket Helical (81)
  • Pocket Milling Pocket Milling (82)
  • Pocket Plunge Milling Pocket Plunge Milling (17)
  • Profile Milling Profile Milling (9)
  • Profiling Profiling (6)
  • Ramping Ramping (67)
  • Shoulder Ball Nose Shoulder Ball Nose (8)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (2)
  • Shoulder Milling Shoulder Milling (72)
  • Shoulder Roughing Shoulder Roughing (28)
  • Shoulder Square End Shoulder Square End (55)
  • Slot Ball Nose Slot Ball Nose (1)
  • Slot Milling Slot Milling (58)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (56)
  • Stacked Plates Drilling Stacked Plates Drilling (7)
  • TRN Boring TRN Boring (3)
  • Tapping Blind Hole Tapping Blind Hole (9)
  • Tapping Through Hole Tapping Through Hole (4)
  • Threading Threading (14)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (58)
  • Through Hole Finishing Through Hole Finishing (62)
  • Turning Turning (6)
Cutting Diameter
Cutting Diameter
  • 0.016 in (2)
  • 0.031 in (1)
  • 0.078 in (1)
  • 0.079 in (1)
  • 0.094 in (3)
  • 0.109 in (1)
  • 0.116 in (1)
  • 0.136 in (1)
  • 0.147 in (1)
  • 0.15 in (1)
  • 0.156 in (1)
  • 0.157 in (2)
  • 0.161 in (1)
  • 0.173 in (1)
  • 0.185 in (1)
  • 0.187 in (1)
  • 0.188 in (1)
  • 0.193 in (1)
  • 0.197 in (2)
  • 0.219 in (2)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.237 in (5)
  • 0.244 in (1)
  • 0.25 in (8)
  • 0.256 in (2)
  • 0.297 in (2)
  • 0.313 in (5)
  • 0.315 in (7)
  • 0.343 in (1)
  • 0.374 in (1)
  • 0.375 in (13)
  • 0.376 in (1)
  • 0.377 in (1)
  • 0.378 in (1)
  • 0.382 in (3)
  • 0.386 in (1)
  • 0.387 in (1)
  • 0.39 in (1)
  • 0.391 in (1)
  • 0.394 in (6)
  • 0.421 in (2)
  • 0.422 in (1)
  • 0.425 in (1)
  • 0.433 in (1)
  • 0.438 in (1)
  • 0.453 in (1)
  • 0.473 in (5)
  • 0.484 in (1)
  • 0.488 in (1)
  • 0.492 in (1)
  • 0.5 in (6)
  • 0.512 in (1)
  • 0.524 in (1)
  • 0.531 in (1)
  • 0.551 in (2)
  • 0.559 in (1)
  • 0.572 in (1)
  • 0.578 in (2)
  • 0.579 in (1)
  • 0.585 in (1)
  • 0.591 in (1)
  • 0.594 in (1)
  • 0.618 in (1)
  • 0.622 in (1)
  • 0.625 in (4)
  • 0.63 in (1)
  • 0.698 in (1)
  • 0.709 in (2)
  • 0.75 in (4)
  • 0.76 in (1)
  • 0.768 in (1)
  • 0.787 in (5)
  • 0.987 in (1)
  • 1.0 in (4)
  • 1.016 in (1)
  • 1.024 in (1)
  • 1.047 in (1)
  • 1.094 in (1)
  • 1.102 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.26 in (1)
  • 1.5 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.4 mm (2)
  • 0.8 mm (1)
  • 1.975 mm (1)
  • 2.0 mm (1)
  • 2.375 mm (3)
  • 2.776 mm (1)
  • 2.95 mm (1)
  • 3.45 mm (1)
  • 3.725 mm (1)
  • 3.801 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (2)
  • 4.101 mm (1)
  • 4.375 mm (1)
  • 4.7 mm (1)
  • 4.75 mm (1)
  • 4.775 mm (1)
  • 4.9 mm (1)
  • 5.0 mm (2)
  • 5.551 mm (2)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 6.0 mm (5)
  • 6.2 mm (1)
  • 6.351 mm (8)
  • 6.5 mm (2)
  • 7.551 mm (2)
  • 7.95 mm (5)
  • 8.0 mm (7)
  • 8.701 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (13)
  • 9.55 mm (1)
  • 9.576 mm (1)
  • 9.601 mm (1)
  • 9.701 mm (3)
  • 9.8 mm (1)
  • 9.826 mm (1)
  • 9.9 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (6)
  • 10.701 mm (2)
  • 10.726 mm (1)
  • 10.8 mm (1)
  • 11.0 mm (1)
  • 11.125 mm (1)
  • 11.5 mm (1)
  • 12.0 mm (5)
  • 12.3 mm (1)
  • 12.4 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (6)
  • 13.0 mm (1)
  • 13.3 mm (1)
  • 13.5 mm (1)
  • 14.0 mm (2)
  • 14.201 mm (1)
  • 14.5 mm (1)
  • 14.675 mm (2)
  • 14.701 mm (1)
  • 14.851 mm (1)
  • 15.0 mm (1)
  • 15.076 mm (1)
  • 15.701 mm (1)
  • 15.8 mm (1)
  • 15.875 mm (4)
  • 16.0 mm (1)
  • 17.7 mm (1)
  • 18.0 mm (2)
  • 19.05 mm (4)
  • 19.3 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (5)
  • 25.076 mm (1)
  • 25.401 mm (4)
  • 25.8 mm (1)
  • 26.0 mm (1)
  • 26.6 mm (1)
  • 27.776 mm (1)
  • 28.0 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 32.0 mm (1)
  • 38.1 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 92.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 3.622 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.8 mm (2)
  • 1.5 mm (1)
  • 1.975 mm (1)
  • 3.0 mm (1)
  • 4.775 mm (3)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 7.95 mm (1)
  • 8.326 mm (1)
  • 9.0 mm (3)
  • 9.525 mm (4)
  • 11.0 mm (3)
  • 12.0 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (5)
  • 12.9 mm (1)
  • 13.0 mm (3)
  • 15.0 mm (4)
  • 15.4 mm (1)
  • 15.8 mm (1)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 18.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 20.651 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.401 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (5)
  • 26.0 mm (2)
  • 27.6 mm (1)
  • 27.701 mm (1)
  • 28.576 mm (5)
  • 28.6 mm (1)
  • 30.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 34.926 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (2)
  • 44.45 mm (3)
  • 44.95 mm (1)
  • 50.801 mm (3)
  • 55.875 mm (1)
  • 57.151 mm (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.031 in (2)
  • 0.06 in (1)
  • 0.078 in (1)
  • 0.119 in (1)
  • 0.188 in (3)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.313 in (1)
  • 0.328 in (1)
  • 0.354 in (3)
  • 0.375 in (4)
  • 0.433 in (3)
  • 0.473 in (1)
  • 0.492 in (1)
  • 0.5 in (5)
  • 0.508 in (1)
  • 0.512 in (3)
  • 0.591 in (4)
  • 0.606 in (1)
  • 0.622 in (1)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.709 in (2)
  • 0.75 in (2)
  • 0.787 in (1)
  • 0.814 in (1)
  • 0.828 in (1)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.882 in (2)
  • 0.984 in (1)
  • 1.0 in (5)
  • 1.024 in (2)
  • 1.087 in (1)
  • 1.091 in (1)
  • 1.125 in (5)
  • 1.127 in (1)
  • 1.181 in (1)
  • 1.22 in (1)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.375 in (1)
  • 1.5 in (4)
  • 1.575 in (2)
  • 1.75 in (3)
  • 1.77 in (1)
  • 2.0 in (3)
  • 2.2 in (1)
  • 2.25 in (2)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 55 (1)
  • 60 (1)
  • ACME (1)
  • API (2)
  • API BUTTRESS (1)
  • BSW (1)
  • M (1)
  • M-Metric/ISO (1)
  • RD DIN 405 (1)
  • STUB ACME (1)
  • TR DIN 103 (1)
  • UN (1)
  • UNJ (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (71)
  • Interrupted (11)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (98)
  • Varying Depth of Cut (67)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.2 mm (1)
  • 24.0 mm (2)
  • 25.901 mm (1)
  • 29.0 mm (3)
  • 33.0 mm (1)
  • 35.0 mm (4)
  • 40.0 mm (7)
  • 40.301 mm (1)
  • 41.0 mm (1)
  • 43.0 mm (3)
  • 45.0 mm (1)
  • 46.5 mm (1)
  • 49.0 mm (1)
  • 51.0 mm (1)
  • 53.1 mm (1)
  • 55.0 mm (2)
  • 55.6 mm (1)
  • 56.0 mm (1)
  • 60.0 mm (2)
  • 63.0 mm (4)
  • 64.5 mm (1)
  • 77.0 mm (1)
  • 90.0 mm (1)
  • 91.0 mm (1)
  • 157.0 mm (1)
  • 160.0 mm (1)
  • 187.451 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.677 in (1)
  • 0.946 in (2)
  • 1.02 in (1)
  • 1.143 in (3)
  • 1.299 in (1)
  • 1.379 in (4)
  • 1.575 in (7)
  • 1.587 in (1)
  • 1.614 in (1)
  • 1.693 in (3)
  • 1.772 in (1)
  • 1.831 in (1)
  • 1.929 in (1)
  • 2.008 in (1)
  • 2.091 in (1)
  • 2.165 in (2)
  • 2.189 in (1)
  • 2.205 in (1)
  • 2.362 in (2)
  • 2.48 in (4)
  • 2.539 in (1)
  • 3.031 in (1)
  • 3.543 in (1)
  • 3.583 in (1)
  • 6.181 in (1)
  • 6.299 in (1)
  • 7.38 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Thread Size
Thread Size
  • 1/4 - 28 (2)
  • 10 - 32 (2)
  • 3/4 - 14 (1)
  • 3/4 - 16 (1)
  • 4 - 40 (1)
  • 7/16 - 20 (2)
  • M12 X 1 (1)
  • M12 X 1,50 (1)
  • M14 X 2 (1)
  • M16 X 2 (1)
  • M16 X 2,0 (1)
Reach
Reach
  • 0.091 in (1)
  • 0.119 in (1)
  • 0.188 in (1)
  • 0.197 in (1)
  • 0.313 in (1)
  • 0.328 in (1)
  • 0.354 in (1)
  • 0.375 in (2)
  • 0.433 in (2)
  • 0.468 in (1)
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.591 in (2)
  • 0.625 in (1)
  • 0.63 in (4)
  • 0.709 in (5)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.814 in (1)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.0 in (3)
  • 1.024 in (1)
  • 1.062 in (1)
  • 1.063 in (1)
  • 1.071 in (1)
  • 1.125 in (3)
  • 1.181 in (1)
  • 1.25 in (2)
  • 1.26 in (1)
  • 1.339 in (3)
  • 1.417 in (3)
  • 1.5 in (3)
  • 1.575 in (3)
  • 1.614 in (1)
  • 1.655 in (1)
  • 1.732 in (3)
  • 1.75 in (3)
  • 1.85 in (1)
  • 1.874 in (1)
  • 1.929 in (1)
  • 1.969 in (2)
  • 2.0 in (3)
  • 2.087 in (2)
  • 2.126 in (1)
  • 2.165 in (7)
  • 2.25 in (2)
  • 2.362 in (2)
  • 2.402 in (1)
  • 2.52 in (1)
  • 2.559 in (1)
  • 2.598 in (1)
  • 2.757 in (1)
  • 2.761 in (1)
  • 2.795 in (1)
  • 2.874 in (1)
  • 3.0 in (1)
  • 3.031 in (2)
  • 3.11 in (2)
  • 3.228 in (1)
  • 3.269 in (4)
  • 3.75 in (1)
  • 3.819 in (1)
  • 3.976 in (1)
  • 4.252 in (1)
  • 6.851 in (1)
  • 7.126 in (1)
Reach Min to Reach Max
Reach
Reach
  • 2.301 mm (1)
  • 3.0 mm (1)
  • 4.775 mm (1)
  • 5.0 mm (1)
  • 7.95 mm (1)
  • 8.326 mm (1)
  • 9.0 mm (1)
  • 9.525 mm (2)
  • 11.0 mm (2)
  • 11.875 mm (1)
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 15.0 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (4)
  • 18.0 mm (5)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 20.651 mm (1)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (3)
  • 26.0 mm (1)
  • 26.975 mm (1)
  • 27.0 mm (1)
  • 27.201 mm (1)
  • 28.576 mm (3)
  • 30.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (1)
  • 34.0 mm (3)
  • 36.0 mm (3)