Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Fresar mais por menos com nossas ofertas por tempo limitado! Compre agora

7792 High-Feed • IC 12 • Stellram

Selecionar filtros
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (96)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (84)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (84)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (84)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (84)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (87)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (92)
  • M Stainless Steel (92)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (92)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (92)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (92)
  • K Cast Iron (72)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (72)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (72)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (72)
  • N Non-Ferrous Materials (58)
    • N1
      Wrought Aluminum (58)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (58)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (58)
  • S High-Temp Alloys (92)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (89)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (89)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (89)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (92)
  • H Hardened Materials (66)
    • H1
      Hardened Materials 44-48 HRC (66)
    • H2
      Hardened Materials 48-55 HRC (55)
Selecione First Choice
  • DE (49)
  • GB (32)
  • IN (10)
  • SG (2)
  • US (50)
Applications
Applications
  • Chamfer Milling Chamfer Milling (8)
  • Face Milling Face Milling (54)
  • Pocket Pocket (53)
  • Pocket Helical Pocket Helical (53)
  • Pocket Milling Pocket Milling (53)
  • Pocket Plunge Milling Pocket Plunge Milling (43)
  • Profile Milling Profile Milling (53)
  • Ramping Ramping (53)
  • Slot Milling Slot Milling (25)
  • Slot Side Slot Side (25)
Cutting Diameter
Cutting Diameter
  • 0.417 in (2)
  • 0.52 in (1)
  • 0.536 in (2)
  • 0.546 in (2)
  • 0.663 in (1)
  • 0.77 in (1)
  • 0.785 in (2)
  • 0.859 in (1)
  • 0.939 in (1)
  • 1.067 in (1)
  • 1.243 in (1)
  • 1.254 in (1)
  • 1.276 in (3)
  • 1.284 in (1)
  • 1.323 in (3)
  • 1.324 in (1)
  • 1.756 in (2)
  • 1.764 in (1)
  • 1.784 in (3)
  • 1.874 in (1)
  • 1.883 in (2)
  • 2.277 in (2)
  • 2.283 in (1)
  • 2.426 in (2)
  • 2.433 in (1)
  • 3.213 in (2)
  • 3.217 in (1)
  • 3.281 in (3)
  • 4.197 in (2)
  • 4.202 in (1)
  • 4.271 in (1)
  • 4.28 in (2)
  • 5.271 in (1)
  • 5.279 in (1)
  • 5.575 in (1)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 10.601 mm (2)
  • 13.201 mm (1)
  • 13.625 mm (2)
  • 13.875 mm (2)
  • 16.85 mm (1)
  • 19.55 mm (1)
  • 19.951 mm (2)
  • 21.826 mm (1)
  • 23.826 mm (1)
  • 27.1 mm (1)
  • 31.576 mm (1)
  • 31.826 mm (1)
  • 32.4 mm (3)
  • 32.625 mm (1)
  • 33.6 mm (3)
  • 33.625 mm (1)
  • 44.6 mm (2)
  • 44.801 mm (1)
  • 45.301 mm (2)
  • 45.325 mm (1)
  • 47.6 mm (1)
  • 47.801 mm (2)
  • 57.801 mm (2)
  • 58.0 mm (1)
  • 61.6 mm (2)
  • 61.801 mm (1)
  • 81.601 mm (2)
  • 81.7 mm (1)
  • 83.301 mm (3)
  • 106.601 mm (2)
  • 106.7 mm (1)
  • 108.45 mm (1)
  • 108.7 mm (2)
  • 133.85 mm (1)
  • 134.076 mm (1)
  • 141.6 mm (1)
Cutting Diameter Min a Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 31.75 mm (3)
  • 32.0 mm (4)
  • 35.0 mm (1)
  • 37.9 mm (1)
  • 38.1 mm (3)
  • 40.0 mm (1)
  • 42.0 mm (1)
  • 50.0 mm (2)
  • 50.6 mm (1)
  • 50.801 mm (3)
  • 51.801 mm (4)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (3)
  • 76.2 mm (3)
  • 79.801 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (3)
  • 101.301 mm (2)
  • 101.601 mm (1)
  • 125.0 mm (3)
  • 127.0 mm (3)
  • 152.4 mm (2)
  • 160.0 mm (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.25 in (3)
  • 1.26 in (4)
  • 1.379 in (1)
  • 1.492 in (1)
  • 1.5 in (3)
  • 1.575 in (1)
  • 1.655 in (1)
  • 1.969 in (2)
  • 1.992 in (1)
  • 2.0 in (3)
  • 2.039 in (4)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (3)
  • 3.0 in (3)
  • 3.142 in (1)
  • 3.15 in (2)
  • 3.938 in (3)
  • 3.988 in (2)
  • 4.0 in (1)
  • 4.921 in (3)
  • 5.0 in (3)
  • 6.0 in (2)
  • 6.299 in (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.925 mm (1)
  • 2.5 mm (53)
Cutting Length Min a Cutting Length Max
Cutting Length
Cutting Length
  • 0.076 in (1)
  • 0.098 in (53)
Cutting Length Min a Cutting Length Max
Reach
Reach
  • 1.575 in (18)
  • 1.693 in (5)
  • 1.75 in (1)
  • 1.772 in (3)
  • 1.969 in (12)
  • 2.48 in (9)
  • 2.755 in (1)
  • 2.757 in (3)
  • 3.0 in (2)
Reach Min a Reach Max
Reach
Reach
  • 40.0 mm (18)
  • 43.0 mm (5)
  • 44.45 mm (1)
  • 45.0 mm (3)
  • 50.0 mm (12)
  • 63.0 mm (9)
  • 69.976 mm (1)
  • 70.0 mm (3)
  • 76.2 mm (2)
Reach Min a Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 11.0 (1)
  • 12.0 (47)
  • 15.0 (6)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (37)
  • KL Screw (2)
  • SHCS or RetScrw Or BoltCircle (3)
  • Screw-On Connection (6)
  • Straight-Cylindrical (6)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 11 (4)
  • 12 (1)
  • 13 (2)
  • 15 (1)
  • 2 (4)
  • 3 (8)
  • 4 (10)
  • 5 (7)
  • 6 (5)
  • 7 (4)
  • 8 (4)
  • 9 (3)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (18)
  • 1.772 in (3)
  • 1.969 in (12)
  • 2.48 in (9)
  • 2.598 in (4)
  • 2.657 in (1)
  • 2.715 in (1)
  • 9.843 in (4)
  • 10.0 in (2)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (18)
  • 45.0 mm (3)
  • 50.0 mm (12)
  • 63.0 mm (9)
  • 66.0 mm (4)
  • 67.5 mm (1)
  • 68.95 mm (1)
  • 250.0 mm (4)
  • 254.0 mm (2)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (78)
  • 0.047 in (65)
  • 0.06 in (64)
  • 0.079 in (57)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (78)
  • 1.201 mm (65)
  • 1.5 mm (64)
  • 2.0 mm (57)
Corner Radius Min a Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • GH2 (55)
  • KC510M (55)
  • KC522M (62)
  • KC725M (55)
  • KCK15 (55)
  • KCK20B (55)
  • KCKP10 (56)
  • KCPK30 (57)
  • KCPM20 (54)
  • KCPM40 (62)
  • KCSM40 (63)
  • SC3025 (55)
  • SC6525 (56)
  • SP4659 (54)
  • SP6519 (57)
  • X400 (55)
  • X500 (60)
Hand Of Tool
Hand Of Tool
  • R (54)
Wiper Insert
Wiper Insert
  • N (48)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.19 (2)
  • 0.2 (1)
  • 0.24 (6)
  • 0.3 (1)
  • 0.31 (3)
  • 0.32 (3)
  • 0.45 (9)
  • 0.6 (5)
  • 0.8 (4)
  • 0.9 (4)
  • 0.93 (2)
  • 0.95 (4)
  • 1.27 (1)
  • 1.44 (1)
  • 1.8 (8)
Maximum Ramp Angle Min a Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • S-SQUARE 90 (102)
  • X-PARALLELOGRAM 75 (54)
Neck Diameter
Neck Diameter
  • 1.141 in (1)
  • 1.143 in (1)
  • 1.156 in (1)
  • 1.18 in (1)
  • 1.181 in (1)
  • 1.42 in (1)
Neck Diameter Min a Neck Diameter Max
Neck Diameter
Neck Diameter
  • 28.951 mm (1)
  • 29.0 mm (1)
  • 29.35 mm (1)
  • 29.975 mm (1)
  • 30.0 mm (1)
  • 36.075 mm (1)
Neck Diameter Min a Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (48)
Insert IC Size
Insert IC Size
  • 12.15 mm (5)
  • 12.175 mm (17)
  • 12.701 mm (26)
Insert IC Size Min a Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.479 in (5)
  • 0.48 in (17)
  • 0.5 in (26)
Insert IC Size Min a Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 12.15 mm (5)
  • 12.175 mm (17)
  • 12.701 mm (26)
Cutting Edge Length Min a Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.479 in (5)
  • 0.48 in (17)
  • 0.5 in (26)
Cutting Edge Length Min a Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • D (9)
  • D41 (8)
  • D411 (4)
  • D721 (1)
  • GP (4)
  • M (5)
  • M41 (17)
Cutting Tool Material
Cutting Tool Material
  • H W (48)
Tolerance Class
Tolerance Class
  • E (8)
  • L (11)
  • P (29)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (6)
  • SCREW-ON (6)
  • SHELL MILL (42)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (5)
  • 22.0 mm (10)
  • 25.401 mm (6)
  • 27.0 mm (6)
  • 29.0 mm (6)
  • 31.75 mm (6)
  • 32.0 mm (5)
  • 38.1 mm (6)
  • 40.0 mm (4)
Back-End Diameter Min a Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (5)
  • 0.866 in (10)
  • 1.0 in (6)
  • 1.063 in (6)
  • 1.143 in (6)
  • 1.25 in (6)
  • 1.26 in (5)
  • 1.5 in (6)
  • 1.575 in (4)
Back-End Diameter Min a Back-End Diameter Max
No filters matching ""

Inserts 7792 IC 12

(48) Inserts 7792 IC 12

Cutters 7792 IC 12 • Metric

(29) Cutters 7792 IC 12 • Metric

Cutters 7792 IC 12 • Inch

(25) Cutters 7792 IC 12 • Inch
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

Models

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Obrigado pelo seu registro bem-sucedido. Agora você tem acesso imediato para fazer login e pode utilizar o site.

You are about to leave the Solution building process.

Are you sure you want to leave?