Idioma

Unidade de medida

Listar preços:

Desconto: %

Listar preços:

$783.40 /cada

Seu preço::

Qtd.

Fresa de fresamento de canto • Para aço e ferro fundido

Downloads SDS

Mill 4™-12^KT • Fresa de facear • Métrico

Name: Mill 4™-12 KT • Fresa de facear • Métrico
SKU: 6524757
Rating: 0 (0 reviews)

Fresa de fresamento de canto • Para aço e ferro fundido

Métrico

Polegada

SAP Material Number	6524757
ISO Catalog Number	KT4D080Z07S27LN12
ANSI Catalog Number	KT4D080Z07S27LN12
[D1] Effective Cutting Diameter	80 mm
[D1] Effective Cutting Diameter	3.149 in
[L] Overall Length	50 mm
[L] Overall Length	1.968 in
[D] Adapter / Shank / Bore Diameter	27 mm
[D] Adapter / Shank / Bore Diameter	1.063 in
[D6] Hub Diameter	60 mm
[D6] Hub Diameter	2.362 in
[AP1MAX] 1st Maximum Cutting Depth	12.145 mm
[AP1MAX] 1st Maximum Cutting Depth	.4781 in
Max RPM	19000
Number of Inserts	7
Weight Kilograms	1.03

Ver todas as variantes de produtos

Materiais das peças

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

H Hardened Materials

Características e benefícios

Fresas de passo fino, grosso e médio.

A interface pastilha/encaixe garante estabilidade e desempenho consistente em aplicações difíceis.

Até 15% menos consumo de energia.

Fácil indexação do inserto através da fixação do parafuso.

Lateral da máquina

carregando...

Lateral da peça

carregando...

Guia de seleção de insertos

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..GE	KC522M	.E..GE	KCPM40	.E..HD	KCPM40
P3–P4	.E..GE	KC522M	.E..GE	KCPM40	.E..HD	KCPM40
P5–P6	.E..GE	KC522M	.E..GE	KCPK30	.E..HD	KCPK30
M1–M2	.E..GE	KC522M	.E..GE	KCSM40	.E..HD	KCPM40
M3	.E..GE	KC522M	.E..GE	KCSM40	.E..HD	KCPM40
K1–K2	.E..GE	KCK15	.E..GE	KCK15	.E..HD	KCK15
K3	.E..GE	KCK20	.E..GE	KCK20B	.E..HD	KCK20B
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..GE	KC522M	.E..GE	KCSM40	–	–
S3	.E..GE	KC522M	.E..GE	KCSM40	–	–
S4	.E..GE	KC522M	.E..GE	KCSM40	–	–
H1	–	–	–	–	–	–

Avanços iniciais recomendados [mm]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40%			50–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.E..GE	0,12	0,33		0,09	0,25		0,08	0,22		0,07	0,20		0,07	0,20
.E..HD	0,12	0,33	0,55	0,09	0,25	0,44	0,08	0,22	0,38	0,07	0,20	0,36	0,07	0,20	0,35
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Avanços recomendados iniciais [IPT]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40%			50–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.E..GE	.005	.014		.004	.010		.003	.009		.003	.008		.003	.008
.E..HD	.005	.014	.024	.004	.010	.018	.003	.009	.015	.003	.008	.014	.003	.008	.014
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Velocidades iniciais recomendadas [m/min.]

Grade		KC522M			KCK15			KCK20B			KCPK30			KCPM40			KCSM40			KC725M
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	1085	935	885	–	–	–	–	–	–	1495	1295	1215	970	855	805	1150	1050	985	855	755	705
	2	900	785	655	–	–	–	–	–	–	920	835	755	820	705	590	985	885	720	720	625	525
	3	835	705	575	–	–	–	–	–	–	835	755	675	755	640	525	920	785	640	655	560	460
	4	740	605	490	–	–	–	–	–	–	625	575	525	675	560	445	785	675	540	590	490	395
	5	605	560	490	–	–	–	–	–	–	855	755	690	560	510	445	655	590	525	490	445	395
	6	540	410	330	–	–	–	–	–	–	525	445	360	490	375	295	590	460	330	425	330	260
M	1	675	590	540	–	–	–	–	–	–	675	605	510	640	560	510	855	625	375	560	490	445
	2	605	525	425	–	–	–	–	–	–	605	525	460	575	490	410	755	560	345	510	425	360
	3	460	395	310	–	–	–	–	–	–	475	425	375	425	375	295	625	460	280	375	330	260
K	1	755	675	605	1380	1250	1115	1180	950	8	970	870	785	–	–	–	–	–	–	–	–	–
	2	590	525	490	1100	970	900	920	755	640	770	690	625	–	–	–	–	–	–	–	–	–
	3	490	445	395	920	820	755	690	575	525	640	575	525	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	130	115	80	–	–	–	–	–	–	–	–	–	130	115	100	195	150	80	115	100	80
	2	130	115	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80	115	100	80
	3	165	130	80	–	–	–	–	–	–	–	–	–	165	130	95	215	150	100	150	115	80
	4	165	150	115	–	–	–	–	–	–	–	–	–	180	165	115	245	195	130	165	150	100
H	1	395	295	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
Recommended starting speeds are in bold type. As the average chip thickness increases, speed should be decreased. Material groups P, M, K, and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

Recommended Starting Speeds [SFM]

Grade		KC522M			KCK15			KCK20B			KCPK30			KCPM40			KCSM40			KC725M
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	1085	935	885	–	–	–	–	–	–	1495	1295	1215	970	855	805	1150	1050	985	855	755	705
	2	900	785	655	–	–	–	–	–	–	920	835	755	820	705	590	985	885	720	720	625	525
	3	835	705	575	–	–	–	–	–	–	835	755	675	755	640	525	920	785	640	655	560	460
	4	740	605	490	–	–	–	–	–	–	625	575	525	675	560	445	785	675	540	590	490	395
	5	605	560	490	–	–	–	–	–	–	855	755	690	560	510	445	655	590	525	490	445	395
	6	540	410	330	–	–	–	–	–	–	525	445	360	490	375	295	590	460	330	425	330	260
M	1	675	590	540	–	–	–	–	–	–	675	605	510	640	560	510	855	625	375	560	490	445
	2	605	525	425	–	–	–	–	–	–	605	525	460	575	490	410	755	560	345	510	425	360
	3	460	395	310	–	–	–	–	–	–	475	425	375	425	375	295	625	460	280	375	330	260
K	1	755	675	605	1380	1265	1115	1180	950	805	970	870	785	–	–	–	–	–	–	–	–	–
	2	590	525	490	1100	970	900	920	755	640	770	690	625	–	–	–	–	–	–	–	–	–
	3	490	445	395	920	820	755	690	575	460	640	575	525	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	130	115	80	–	–	–	–	–	–	–	–	–	130	115	100	195	150	80	115	100	80
	2	130	115	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80	115	100	80
	3	165	130	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100	150	115	80
	4	165	150	115	–	–	–	–	–	–	165	150	115	180	165	115	245	195	130	165	150	100
H	1	395	295	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
Recommended starting speeds are in bold type. As the average chip thickness increases, speed should be decreased. Material groups P, M, K, and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Código de catálogo ISO	Classe

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Converse com um especialista

Enviar uma mensagem

Converse com um especialista

Enviar uma mensagem

Editando solução

Adicionando solução

Mill 4™-12^KT • Fresa de facear • Métrico

Fresa de fresamento de canto • Para aço e ferro fundido

Materiais das peças

Características e benefícios

Lateral da máquina

Lateral da peça

Guia de seleção de insertos

Avanços iniciais recomendados [mm]

Avanços recomendados iniciais [IPT]

Velocidades iniciais recomendadas [m/min.]

Recommended Starting Speeds [SFM]

Sugestões de produtos

Product Family suggestions

Converse com um especialista

Enviar uma mensagem

Notificações

Converse com um especialista

Enviar uma mensagem

Mill 4™-12KT • Fresa de facear • Métrico

Fresa de fresamento de canto • Para aço e ferro fundido

Materiais das peças

Características e benefícios

Lateral da máquina

Lateral da peça

Guia de seleção de insertos

Avanços iniciais recomendados [mm]

Avanços recomendados iniciais [IPT]

Velocidades iniciais recomendadas [m/min.]

Recommended Starting Speeds [SFM]

The following files are available

Mill 4™-12^KT • Fresa de facear • Métrico