successfully added to cart
View Cart

Notifications

Mark all as read
Břitové destičky Kenloc™
Břitové destičky Kenloc™
Břitové destičky Kenloc™
Břitové destičky Kenloc™

TNMM-RM

Břitové destičky Kenloc™

Features and benefits



  • Hrubovací geometrie s dobrým utvářením třísky.

  • Včetně sort Beyond™ Drive™.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 3.0 (1)
  • 6.0 (9)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0313 in (3)
  • 0.0469 in (5)
  • 0.0625 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (3)
  • 1.2 mm (5)
  • 1.6 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCP25 (3)
  • KCP25B (4)
  • KCP30 (3)
insertGeometry
Insert IC Size
Insert IC Size
  • 9.525 mm (3)
  • 12.7 mm (4)
  • 15.875 mm (3)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (3)
  • 0.5 in (4)
  • 0.625 in (3)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 16.5 mm (3)
  • 22.0 mm (4)
  • 27.496 mm (3)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.6496 in (3)
  • 0.8661 in (4)
  • 1.0825 in (3)
Cutting Edge Length Min to Cutting Edge Length Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 10 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Beyond_Drive_Grades [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
3754396 TNMM160408RM TNMM332RM KCP30   9.5250 .3750 16.5000 .6496 4.7600 .1875 0.8000 .0312 3.8100 .1500
    List price:
    $15.81 /each.
    Your price::
    Qty
    5698193 TNMM160408RM TNMM332RM KCP25B Beyond™ Drive™ 9.5250 .3750 16.5000 .6496 4.7600 .1875 0.8000 .0312 3.8100 .1500
      List price:
      $15.81 /each.
      Your price::
      Qty
      3751749 TNMM160412RM TNMM333RM KCP25   9.5250 .3750 16.5000 .6496 4.7600 .1875 1.2000 .0468 3.8100 .1500
        List price:
        $15.81 /each.
        Your price::
        Qty
        5698210 TNMM220408RM TNMM432RM KCP25B Beyond™ Drive™ 12.7000 .5000 22.0000 .8661 4.7600 .1875 0.8000 .0312 5.1600 .2031
          List price:
          $20.76 /each.
          Your price::
          Qty
          3754398 TNMM220412RM TNMM433RM KCP30   12.7000 .5000 22.0000 .8661 4.7600 .1875 1.2000 .0468 5.1600 .2031
            List price:
            $20.76 /each.
            Your price::
            Qty
            5698194 TNMM220412RM TNMM433RM KCP25B Beyond™ Drive™ 12.7000 .5000 22.0000 .8661 4.7600 .1875 1.2000 .0468 5.1600 .2031
              List price:
              $20.76 /each.
              Your price::
              Qty
              5698195 TNMM220416RM TNMM434RM KCP25B Beyond™ Drive™ 12.7000 .5000 22.0000 .8661 4.7600 .1875 1.6000 .0625 5.1600 .2031
                List price:
                $20.76 /each.
                Your price::
                Qty
                3751753 TNMM270612RM TNMM543RM KCP25   15.8750 .6250 27.4960 1.082 6.3500 .2500 1.2000 .0468 6.3500 .2500
                  List price:
                  $37.57 /each.
                  Your price::
                  Qty
                  3754399 TNMM270612RM TNMM543RM KCP30   15.8750 .6250 27.4960 1.082 6.3500 .2500 1.2000 .0468 6.3500 .2500
                    List price:
                    $37.57 /each.
                    Your price::
                    Qty
                    3751754 TNMM270616RM TNMM544RM KCP25   15.8750 .6250 27.4960 1.082 6.3500 .2500 1.6000 .0625 6.3500 .2500
                      List price:
                      $37.57 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      Grades

                      • KC8050

                        composition: A newly developed, advanced cobalt-enriched carbide
                        grade with a thick alumina coating.
                        application: A versatile performer on a wide range of workpiece
                        materials (steels, stainless steels, and cast irons) for roughing through
                        finishing operations. This highly wear-resistant grade can operate with
                        or without coolant at high speeds, and has exceptional edge strength
                        for interrupted cuts. The micro-finished insert edge resists workpiece
                        build-up and microchipping, and produces excellent surface finishes.
                        For machining steels and cast irons, your first choices are the -RN and
                        -MN geometries. For medium machining applications and finishing
                        cuts, the -MP and -FP geometries with a positive rake are suggested.

                      • KC9110

                        Composition: Specially engineered, cobalt-enriched carbide grade with thick K-MTCVD-TiCN coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for maximum abrasion and wear resistance for high-speed machining.
                        Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. A balanced combination of deformation resistance and edge toughness. The smooth coating resists built-up edge and microchipping. For rougher cutting, use the KC9125 grade.

                      • KC9125

                        Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer K-MTCVD TiCNAl2O3-TiCN-TiN coating with superior interlayer adhesion.
                        Application: General-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance along with excellent bulk toughness and insert edge strength. Coating layers offer wear resistance over a wide range of machining conditions and reduce frictional heat, minimise microchipping, and improve workpiece surface finishes. Performs well in moderately heavy roughing to semi-finishing cuts. Use the KC9110 grade for finishing cuts.

                      • KCP10

                        Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                        Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                        P Steel
                        K Cast Iron
                      • KCP10B

                        Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                        Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                        P Steel
                        K Cast Iron
                      • KCP25

                        Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
                        Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                        P Steel
                        K Cast Iron
                      • KCP25B

                        Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                        Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                        P Steel
                        K Cast Iron
                      • KCP30

                        Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3 coating.
                        Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.

                        P Steel
                      • KCP40B

                        Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.

                        Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.

                        P Steel
                        M Stainless Steel
                      product-image
                      Please adjust the following properties from

                      ISO Catalog Number

                      ANSI Catalog Number

                      to find similar products.
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      The following CAD files are available

                      Please select a file to download

                      You should be logged to see your dashboard information
                      Session expired due to inactivity, please login again
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart