Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSOM

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (60)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (57)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (57)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (57)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (57)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (57)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (60)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (60)
  • M Stainless Steel (59)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (59)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (59)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (59)
  • K Cast Iron (53)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (53)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (53)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (53)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (37)
  • S High-Temp Alloys (59)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (53)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (53)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (53)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (59)
  • H Hardened Materials (42)
    • H1
      Hardened Materials 44-48 HRC (42)
Applications
Applications
  • Chamfer Milling Chamfer Milling (36)
  • Face Milling Face Milling (36)
  • Pocket Milling Pocket Milling (5)
  • Pocket Plunge Milling Pocket Plunge Milling (5)
  • Ramping Ramping (36)
Cutting Diameter
Cutting Diameter
  • 2.48 in (4)
  • 2.5 in (3)
  • 3.0 in (4)
  • 3.15 in (4)
  • 3.938 in (4)
  • 4.0 in (4)
  • 4.921 in (4)
  • 5.0 in (3)
  • 6.0 in (3)
  • 6.299 in (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 63.0 mm (4)
  • 63.5 mm (3)
  • 76.2 mm (4)
  • 80.0 mm (4)
  • 100.0 mm (4)
  • 101.601 mm (4)
  • 125.0 mm (4)
  • 127.0 mm (3)
  • 152.4 mm (3)
  • 160.0 mm (3)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 74.2 mm (1)
  • 74.3 mm (3)
  • 74.7 mm (1)
  • 74.8 mm (2)
  • 87.301 mm (1)
  • 87.4 mm (2)
  • 87.601 mm (1)
  • 90.9 mm (1)
  • 91.2 mm (3)
  • 110.9 mm (2)
  • 111.0 mm (1)
  • 111.101 mm (1)
  • 112.5 mm (1)
  • 112.7 mm (3)
  • 135.9 mm (1)
  • 136.0 mm (3)
  • 137.875 mm (1)
  • 138.0 mm (2)
  • 163.201 mm (1)
  • 163.3 mm (2)
  • 170.9 mm (1)
  • 170.925 mm (2)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.922 in (1)
  • 2.926 in (3)
  • 2.942 in (1)
  • 2.945 in (2)
  • 3.438 in (1)
  • 3.442 in (2)
  • 3.45 in (1)
  • 3.579 in (1)
  • 3.591 in (3)
  • 4.366 in (2)
  • 4.37 in (1)
  • 4.374 in (1)
  • 4.429 in (1)
  • 4.437 in (3)
  • 5.351 in (1)
  • 5.354 in (3)
  • 5.428 in (1)
  • 5.433 in (2)
  • 6.425 in (1)
  • 6.429 in (2)
  • 6.728 in (1)
  • 6.729 in (2)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 5.0 mm (36)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (36)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.693 in (4)
  • 1.75 in (11)
  • 1.969 in (8)
  • 2.38 in (6)
  • 2.48 in (6)
  • 2.482 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 43.0 mm (4)
  • 44.45 mm (11)
  • 50.0 mm (8)
  • 60.45 mm (6)
  • 63.0 mm (6)
  • 63.051 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (36)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (23)
  • B-Cutter Retention Screw (10)
  • SHCS or RetScrw Or BoltCircle (3)
Number of Flutes
Number of Flutes
  • 10 (4)
  • 11 (2)
  • 12 (4)
  • 13 (1)
  • 4 (4)
  • 5 (6)
  • 6 (6)
  • 7 (3)
  • 8 (4)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.693 in (4)
  • 1.75 in (11)
  • 1.969 in (8)
  • 2.38 in (6)
  • 2.48 in (6)
  • 2.482 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 43.0 mm (4)
  • 44.45 mm (11)
  • 50.0 mm (8)
  • 60.45 mm (6)
  • 63.0 mm (6)
  • 63.051 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Chamfer
Corner Chamfer
  • 0.0 mm (37)
  • 0.05 mm (40)
  • 0.1 mm (49)
  • 0.225 mm (48)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (37)
  • 0.002 in (40)
  • 0.004 in (49)
  • 0.01 in (48)
Corner Chamfer Min komu Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (37)
  • KC520M (39)
  • KC522M (41)
  • KC725M (42)
  • KC915M (36)
  • KCK15 (38)
  • KCK20B (37)
  • KCPK30 (42)
  • KCPM40 (38)
  • KCSM30 (37)
  • KCSM40 (39)
Hand Of Tool
Hand Of Tool
  • R (36)
Wiper Insert
Wiper Insert
  • N (30)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.8 (2)
  • 2.0 (6)
  • 2.2 (2)
  • 2.9 (2)
  • 3.0 (3)
  • 4.0 (3)
  • 4.2 (2)
  • 5.5 (2)
  • 6.0 (3)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • O-OCTOGON 135 (30)
Insert IC Size
Insert IC Size
  • 18.7 mm (30)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.736 in (30)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 7.5 mm (30)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.295 in (30)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GB (13)
  • HB (10)
  • LB (6)
  • LN (1)
Cutting Tool Material
Cutting Tool Material
  • H W (30)
Tolerance Class
Tolerance Class
  • K (18)
  • P (12)
backEnd
Connection Type
Connection Type
  • SHELL MILL (36)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (3)
  • 22.0 mm (4)
  • 25.401 mm (4)
  • 27.0 mm (4)
  • 31.75 mm (3)
  • 31.8 mm (1)
  • 32.0 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (7)
  • 50.801 mm (3)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (3)
  • 0.866 in (4)
  • 1.0 in (4)
  • 1.063 in (4)
  • 1.25 in (3)
  • 1.252 in (1)
  • 1.26 in (4)
  • 1.5 in (3)
  • 1.575 in (7)
  • 2.0 in (3)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

KSOM • Nástrčné frézy • Upínání šroubem nebo klínovou upínkou • Hrubá rozteč • Metrické

(5) KSOM • Nástrčné frézy • Upínání šroubem nebo klínovou upínkou • Hrubá rozteč • Metrické

KSOM • Nástrčné frézy • Klínová upínka • Jemná rozteč • Metrické

(4) KSOM • Nástrčné frézy • Klínová upínka • Jemná rozteč • Metrické

KSOM • Shell Mills • Fine Pitch • Wedge Clamping • Inch

(7) KSOM • Shell Mills • Fine Pitch • Wedge Clamping • Inch

KSOM • Shell Mills • Inch

(10) KSOM • Shell Mills • Inch

KSOM • Nástrčné frézy • Metrické

(10) KSOM • Nástrčné frézy • Metrické

Břitové destičky pro KSOM • OFPT-GB

(7) Břitové destičky pro KSOM • OFPT-GB

Břitové destičky pro KSOM • OFKT-LNJ

(1) Břitové destičky pro KSOM • OFKT-LNJ

Břitové destičky pro KSOM • OFPT- HB

(5) Břitové destičky pro KSOM • OFPT- HB

Břitové destičky pro KSOM • OFKT64-GB

(6) Břitové destičky pro KSOM • OFKT64-GB

Břitové destičky pro KSOM • OFKT-HB

(5) Břitové destičky pro KSOM • OFKT-HB

Břitové destičky pro KSOM • OFKT-LB

(6) Břitové destičky pro KSOM • OFKT-LB
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?