Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSSM™ 12 • Slotting Cutters • IC 12

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (113)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (106)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (106)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (106)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (106)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (106)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (113)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (113)
  • M Stainless Steel (106)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (106)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (106)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (106)
  • K Cast Iron (100)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (100)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (100)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (100)
  • N Non-Ferrous Materials (60)
    • N1
      Wrought Aluminum (60)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (60)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (60)
  • S High-Temp Alloys (101)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (89)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (89)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (89)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (101)
  • H Hardened Materials (58)
    • H1
      Hardened Materials 44-48 HRC (58)
Applications
Applications
  • Face Milling Face Milling (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (19)
  • Shoulder Milling Shoulder Milling (21)
  • Shoulder Square End Shoulder Square End (21)
  • Slot Milling Slot Milling (32)
  • Slot Side Slot Side (32)
Cutting Diameter
Cutting Diameter
  • 4.921 in (10)
  • 5.0 in (2)
  • 6.0 in (5)
  • 6.299 in (10)
  • 7.875 in (7)
  • 8.0 in (4)
  • 9.843 in (6)
  • 10.0 in (2)
  • 12.0 in (2)
  • 12.403 in (5)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 125.0 mm (10)
  • 127.0 mm (2)
  • 152.4 mm (5)
  • 160.0 mm (10)
  • 200.0 mm (7)
  • 203.201 mm (4)
  • 250.0 mm (6)
  • 254.0 mm (2)
  • 304.8 mm (2)
  • 315.0 mm (5)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.701 mm (21)
  • 18.0 mm (14)
  • 18.776 mm (2)
  • 18.901 mm (3)
  • 19.826 mm (1)
  • 19.85 mm (2)
  • 20.651 mm (10)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.461 in (21)
  • 0.709 in (14)
  • 0.739 in (2)
  • 0.744 in (3)
  • 0.781 in (3)
  • 0.814 in (10)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.969 in (4)
  • 2.0 in (2)
  • 2.011 in (11)
  • 2.093 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 50.0 mm (4)
  • 50.801 mm (2)
  • 51.051 mm (11)
  • 53.151 mm (2)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (57)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (14)
  • 2 Key & Socket Head Cap Screw (20)
  • A-Socket Head Cap Screw (3)
  • B-Cutter Retention Screw (11)
  • C-Bolt Circle (5)
Number of Flutes
Number of Flutes
  • 10 (3)
  • 11 (2)
  • 12 (4)
  • 14 (5)
  • 16 (2)
  • 18 (1)
  • 4 (6)
  • 5 (5)
  • 7 (6)
  • 8 (10)
  • 9 (9)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (56)
  • 4.0 (139)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.742 in (3)
  • 0.787 in (3)
  • 0.951 in (4)
  • 1.969 in (4)
  • 2.0 in (2)
  • 2.011 in (11)
  • 2.093 in (2)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 18.85 mm (3)
  • 20.0 mm (3)
  • 24.125 mm (4)
  • 50.0 mm (4)
  • 50.801 mm (2)
  • 51.051 mm (11)
  • 53.151 mm (2)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (57)
  • 0.031 in (93)
  • 0.047 in (67)
  • 0.063 in (61)
  • 0.078 in (60)
  • 0.094 in (54)
  • 0.095 in (56)
  • 0.125 in (62)
  • 0.126 in (53)
  • 0.187 in (53)
  • 0.249 in (55)
  • 0.25 in (54)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (57)
  • 0.8 mm (93)
  • 1.201 mm (67)
  • 1.6 mm (61)
  • 1.975 mm (60)
  • 2.375 mm (54)
  • 2.401 mm (56)
  • 3.176 mm (62)
  • 3.2 mm (53)
  • 4.75 mm (53)
  • 6.325 mm (55)
  • 6.351 mm (54)
Corner Radius Min komu Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (142)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (142)
Corner Chamfer Min komu Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (60)
  • KC510M (53)
  • KC520M (62)
  • KC522M (54)
  • KC525M (41)
  • KC715M (41)
  • KC725M (75)
  • KC735M (53)
  • KC792M (41)
  • KC915M (53)
  • KC920M (53)
  • KC925M (41)
  • KC935M (41)
  • KCK15 (64)
  • KCK20B (62)
  • KCPK30 (65)
  • KCPM20 (57)
  • KCPM40 (59)
  • KCSM30 (53)
  • KCSM40 (60)
  • KTPK20 (42)
  • KUC20M (41)
  • KUC30M (41)
  • KY1335 (41)
  • KY3500 (53)
  • X500 (53)
Hand Of Tool
Hand Of Tool
  • L (12)
  • N (32)
  • R (9)
Wiper Insert
Wiper Insert
  • N (89)
frontEnd
Clamp Style
Clamp Style
  • S (4)
Cutting Width
Cutting Width
  • 0.709 in (14)
  • 0.739 in (4)
  • 0.744 in (1)
  • 0.781 in (3)
  • 0.814 in (10)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 18.0 mm (14)
  • 18.776 mm (4)
  • 18.901 mm (1)
  • 19.826 mm (3)
  • 20.651 mm (10)
Cutting Width Min komu Cutting Width Max
Cartridge Size
Cartridge Size
  • 18N - KSSM Slotting (2)
  • 20W - KSSM Slotting (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.997 in (1)
  • 1.029 in (1)
  • 1.256 in (6)
  • 1.331 in (1)
  • 1.339 in (4)
  • 1.709 in (3)
  • 1.831 in (1)
  • 1.851 in (2)
  • 1.857 in (1)
  • 2.028 in (4)
  • 2.029 in (1)
  • 2.055 in (1)
  • 2.069 in (2)
  • 2.102 in (2)
  • 2.299 in (2)
  • 2.536 in (2)
  • 2.539 in (2)
  • 2.543 in (1)
  • 2.567 in (1)
  • 2.581 in (2)
  • 3.313 in (1)
  • 3.516 in (1)
  • 3.524 in (1)
  • 3.543 in (1)
  • 3.559 in (1)
  • 3.565 in (2)
  • 3.579 in (2)
  • 4.508 in (3)
  • 4.516 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 25.326 mm (1)
  • 26.125 mm (1)
  • 31.901 mm (6)
  • 33.801 mm (1)
  • 34.0 mm (4)
  • 43.401 mm (3)
  • 46.5 mm (1)
  • 47.026 mm (2)
  • 47.176 mm (1)
  • 51.5 mm (4)
  • 51.526 mm (1)
  • 52.2 mm (1)
  • 52.551 mm (2)
  • 53.401 mm (2)
  • 58.401 mm (2)
  • 64.425 mm (2)
  • 64.5 mm (2)
  • 64.575 mm (1)
  • 65.2 mm (1)
  • 65.55 mm (2)
  • 84.125 mm (1)
  • 89.301 mm (1)
  • 89.5 mm (1)
  • 89.976 mm (1)
  • 90.4 mm (1)
  • 90.551 mm (2)
  • 90.9 mm (2)
  • 114.5 mm (3)
  • 114.7 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (89)
Insert IC Size
Insert IC Size
  • 12.701 mm (89)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.5 in (89)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 12.701 mm (89)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5 in (89)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GB2 (61)
  • LD (8)
  • LD2 (13)
  • LE (7)
Cutting Tool Material
Cutting Tool Material
  • H T (1)
  • H W (88)
Tolerance Class
Tolerance Class
  • C (28)
  • E (48)
  • P (13)
backEnd
Connection Type
Connection Type
  • ARBOR (34)
  • SHELL MILL (19)
Back-End Diameter
Back-End Diameter
  • 31.75 mm (1)
  • 32.0 mm (6)
  • 38.1 mm (7)
  • 40.0 mm (16)
  • 50.0 mm (9)
  • 50.801 mm (6)
  • 60.0 mm (7)
  • 63.5 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.25 in (1)
  • 1.26 in (6)
  • 1.5 in (7)
  • 1.575 in (16)
  • 1.969 in (9)
  • 2.0 in (6)
  • 2.362 in (7)
  • 2.5 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

Inserts KSSM™ 12

(89) Inserts KSSM™ 12

Cutters KSSM™ 12 • Metric

(42) Cutters KSSM™ 12 • Metric

Cutters KSSM™ 12 • Inch

(19) Cutters KSSM™ 12 • Inch
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?