Country

Jazyk

Měrná jednotka

Ceníková cena:

Sleva: %

Ceníková cena:

$1,132.20 /každý

Vaše cena::

Počet

Výměnné čelní stopkové frézy — Fréza 1-10

KSSM-KSSP Helical End Mills • Shell Mills • Inch

Name: KSSM-KSSP Helical End Mills • Shell Mills • Inch
SKU: 2400680
Rating: 0 (0 reviews)

Výměnné čelní stopkové frézy — Fréza 1-10

Metrické

Palcové

SAP Material Number	2400680
ISO Catalog Number	KSSP200R3SD43L168
ANSI Catalog Number	KSSP200R3SD43L168
[D1] Effective Cutting Diameter	50.8 mm
[D1] Effective Cutting Diameter	2 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D6] Hub Diameter	44.45 mm
[D6] Hub Diameter	1.75 in
[L] Overall Length	57.15 mm
[L] Overall Length	2.25 in
[AP1MAX] 1st Maximum Cutting Depth	42.951 mm
[AP1MAX] 1st Maximum Cutting Depth	1.691 in
Number of Inserts	12
[Z] Number of Flutes	3
Weight Pounds	1.02
Max RPM	16300

Zobrazit všechny varianty produktů

Použití

Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Milling - Through Coolant
Milling - Side and Face

Materiály obrobků

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Vlastnosti a výhody

Patented HARVI™ technology.

Progressive helical rakes.

Increased Metal Removal Rates (MRR).

Excellent surface finishes.

Low power requirements.

Four cutting edges.

Strana stroje

načítání...

Strana obrobku

načítání...

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1 - P2	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
P3 - P4	.E..LD2	KCPM40	.E..GB2	KCPK30	.S..GB2	KCPK30
P5 - P6	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
M1 - M2	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
M3	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
K1 - K2	.E..LD2	KC520M	.E..GB2	KCK15	.S..GB2	KCK15
K3	.E..LD2	KC520M	.E..GB2	KC520M	.S..GB2	KC520M
N1 - N2	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
N3	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
S1 - S2	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
S3	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
S4	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
H1	–	–	–	–	–	–

Werkstoffgruppe	Leichte Bearbeitung		Allgemeine Anwendung		Schruppbearbeitung
–	(Leicht schneidende Geometrie)		–		(Stabile Geometrie)
–	Verschleiß- festigkeit		<="" td="">		Zähigkeit
–	Geometrie	Sorte	Geometrie	Sorte	Geometrie	Sorte
P1–P2	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
P3–P4	.E..LD2	KCPM40	.E..GB2	KCPK30	.S..GB2	KCPK30
P5–P6	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
M1–M2	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
M3	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
K1–K2	.E..LD2	KC520M	.E..GB2	KCK15	.S..GB2	KCK15
K3	.E..LD2	KC520M	.E..GB2	KC520M	.S..GB2	KC520M
N1–N2	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
N3	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
S1–S2	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
S3	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
S4	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
H1	–	–	–	–	–	–

KSSM™ 12 • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LE	0.005	0.017	0.030	0.003	0.012	0.021	0.003	0.009	0.016	0.002	0.008	0.014	0.002	0.007	0.013
.E..LD2	0.005	0.018	0.032	0.004	0.013	0.023	0.003	0.010	0.017	0.002	0.009	0.015	0.002	0.008	0.014
.E..GB2	0.009	0.021	0.035	0.007	0.015	0.025	0.005	0.011	0.019	0.004	0.010	0.016	0.004	0.009	0.015
.S..GB2	0.009	0.023	0.037	0.007	0.017	0.027	0.005	0.013	0.020	0.004	0.011	0.017	0.004	0.010	0.016
.S..GN	0.009	0.023	0.037	0.007	0.017	0.027	0.005	0.013	0.020	0.004	0.011	0.017	0.004	0.010	0.016
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Light Machining

General Purpose

Heavy Machining

Recommended Starting Feeds [IPT]

Schneidkörper- Geometrie	Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in %															Schneidkörper- Geometrie
	5%			10%			20%			30%			40–100%
.F..LE	.005	.017	.030	.003	.012	.021	.003	.009	.016	.002	.008	.014	.002	.007	.013	.F..LE
.E..LD	.007	.019	.032	.005	.013	.023	.004	.010	.017	.003	.009	.015	.003	.008	.014	.E..LD
.E..LD2	.005	.018	.032	.004	.013	.023	.003	.010	.017	.002	.009	.015	.002	.008	.014	.E..LD2
.E..GB	.009	.021	.035	.007	.015	.025	.005	.011	.019	.004	.010	.016	.004	.009	.015	.E..GB
.E..GB2	.009	.021	.035	.007	.015	.025	.005	.011	.019	.004	.010	.016	.004	.009	.015	.E..GB2
.S..GB	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.S..GB
.S..GB2	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.S..GB2
.S..GN	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.S..GN

Leichte Bearbeitung

Allgemeine Anwendung

Schruppbearbeitung

Recommended Starting Speeds and Feeds [SFM]

KSSM™ 12 • Recommended Starting Speed [SFM]
Grade		KCPM20			KC410M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40			KTPK20			KY3500
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	550	485	450	–	–	–	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1150	1050	985	1200	985	835	–	–	–
	2	340	310	275	–	–	–	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	985	885	720	870	720	655	–	–	–
	3	310	275	255	–	–	–	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	920	785	640	805	655	590	–	–	–
	4	230	215	190	–	–	–	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	785	675	540	690	590	525	–	–	–
	5	275	250	230	–	–	–	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	655	590	525	605	560	490	–	–	–
	6	190	170	145	–	–	–	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	590	460	330	525	425	330	–	–	–
M	1	225	200	175	–	–	–	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	855	690	605	785	640	540	–	–	–
	2	205	175	160	–	–	–	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	770	590	475	705	605	490	–	–	–
	3	160	145	125	–	–	–	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	575	475	360	525	445	360	–	–	–
K	1	360	325	295	–	–	–	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	–	–	–	755	640	525	2640	2395	2135
	2	285	255	235	–	–	–	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	–	–	–	605	490	425	2085	1870	1740
	3	240	215	200	–	–	–	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	–	–	–	490	425	345	1755	1560	1425
N	1	–	–	–	3985	3545	3265	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	165	130	80	–	–	–	–	–	–
	2	–	–	–	–	–	–	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80	–	–	–	–	–	–
	3	–	–	–	–	–	–	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100	–	–	–	–	–	–
	4	–	–	–	–	–	–	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	245	195	130	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

Recommended Starting Speeds [SFM]

Werkstoffgruppe		KC410M			KC520M			KC522M			KC725M			KCK15			KCPM20			KCPK30
P	1	–	–	–	–	–	–	1080	940	880	860	750	700	–	–	–	1810	1590	1470	1485	1300	1210
	2	–	–	–	–	–	–	900	790	660	720	630	530	–	–	–	1120	1010	910	920	830	750
	3	–	–	–	–	–	–	830	700	580	660	560	460	–	–	–	1010	910	830	830	750	680
	4	–	–	–	–	–	–	740	610	490	590	490	390	–	–	–	760	700	630	620	575	520
	5	–	–	–	–	–	–	610	550	490	490	440	390	–	–	–	910	820	750	850	760	690
	6	–	–	–	–	–	–	540	410	330	430	330	260	–	–	–	630	550	475	520	450	–
M	1	–	–	–	–	–	–	670	590	540	560	490	450	–	–	–	730	655	570	680	600	515
	2	–	–	–	–	–	–	610	520	430	510	430	360	–	–	–	670	580	520	610	530	460
	3	–	–	–	–	–	–	460	400	310	380	330	260	–	–	–	530	475	410	475	430	380
K	1	–	–	–	880	800	710	750	680	600	–	–	–	1380	1255	1115	1180	1070	960	965	875	780
	2	–	–	–	690	620	580	590	530	490	–	–	–	1095	975	910	940	840	770	770	690	630
	3	–	–	–	580	520	470	490	440	400	–	–	–	920	815	750	790	700	650	645	575	530
N	1–2	3990	3550	3270	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	130	120	90	115	100	80	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	130	120	90	115	100	80	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	170	130	90	150	115	80	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	230	170	120	200	150	100	–	–	–	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Katalogové číslo ISO	Karbid

Vítejte

Potvrďte své předvolby

Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

kontaktujte obchodni oddělení

kontaktujte obchodni oddělení

Úprava řešení

Přidání řešení

KSSM-KSSP Helical End Mills • Shell Mills • Inch