Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Cutters Mill 1-14™ • Metric

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (56)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (56)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (56)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (56)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (56)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (56)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (56)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (56)
  • M Stainless Steel (56)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (56)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (56)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (56)
  • K Cast Iron (56)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (56)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (56)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (56)
  • N Non-Ferrous Materials (56)
    • N1
      Wrought Aluminum (56)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (56)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (56)
  • S High-Temp Alloys (56)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (56)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (56)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (56)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (56)
  • H Hardened Materials (56)
    • H1
      Hardened Materials 44-48 HRC (56)
Vybrat první volbu
  • CN (51)
  • DE (51)
  • GB (27)
  • IN (3)
  • SG (9)
  • US (13)
Applications
Applications
  • Face Milling Face Milling (56)
  • Pocket Pocket (56)
  • Pocket Helical Pocket Helical (56)
  • Pocket Milling Pocket Milling (56)
  • Ramping Ramping (56)
  • Shoulder Milling Shoulder Milling (56)
  • Shoulder Roughing Shoulder Roughing (13)
  • Shoulder Square End Shoulder Square End (56)
  • Slot Milling Slot Milling (40)
  • Slot Square End Slot Square End (40)
Cutting Diameter
Cutting Diameter
  • 0.787 in (4)
  • 0.984 in (8)
  • 1.26 in (11)
  • 1.575 in (14)
  • 1.969 in (5)
  • 2.48 in (7)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.921 in (2)
  • 6.299 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 20.0 mm (4)
  • 25.0 mm (8)
  • 32.0 mm (11)
  • 40.0 mm (14)
  • 50.0 mm (5)
  • 63.0 mm (7)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 125.0 mm (2)
  • 160.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 14.0 mm (6)
  • 14.101 mm (3)
  • 14.201 mm (2)
  • 14.3 mm (6)
  • 14.4 mm (4)
  • 14.476 mm (4)
  • 14.5 mm (4)
  • 14.601 mm (11)
  • 14.701 mm (3)
  • 26.901 mm (1)
  • 27.3 mm (1)
  • 27.5 mm (1)
  • 27.8 mm (1)
  • 39.95 mm (2)
  • 40.401 mm (1)
  • 40.801 mm (2)
  • 52.825 mm (1)
  • 52.85 mm (1)
  • 53.5 mm (1)
  • 54.0 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.551 in (6)
  • 0.555 in (3)
  • 0.559 in (2)
  • 0.564 in (6)
  • 0.568 in (4)
  • 0.571 in (4)
  • 0.572 in (4)
  • 0.576 in (11)
  • 0.579 in (3)
  • 1.059 in (1)
  • 1.075 in (1)
  • 1.083 in (1)
  • 1.094 in (1)
  • 1.573 in (2)
  • 1.591 in (1)
  • 1.606 in (2)
  • 2.08 in (1)
  • 2.081 in (1)
  • 2.106 in (1)
  • 2.126 in (1)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.379 in (3)
  • 1.536 in (2)
  • 1.575 in (10)
  • 1.732 in (4)
  • 1.969 in (25)
  • 2.48 in (3)
  • 2.559 in (4)
  • 2.953 in (2)
  • 3.15 in (3)
Reach Min komu Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 39.0 mm (2)
  • 40.0 mm (10)
  • 44.0 mm (4)
  • 50.0 mm (25)
  • 63.0 mm (3)
  • 65.0 mm (4)
  • 75.0 mm (2)
  • 80.0 mm (3)
Reach Min komu Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (17)
  • B-Cutter Retention Screw (2)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (7)
  • Straight-Cylindrical (16)
  • Weldon (13)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 11 (1)
  • 12 (1)
  • 2 (9)
  • 3 (18)
  • 4 (12)
  • 5 (7)
  • 6 (2)
  • 7 (2)
  • 8 (1)
  • 9 (2)
Over All Length [L]
Over All Length [L]
  • 1.575 in (6)
  • 1.969 in (6)
  • 2.165 in (1)
  • 2.244 in (2)
  • 2.48 in (3)
  • 2.539 in (4)
  • 2.559 in (3)
  • 2.953 in (2)
  • 3.543 in (2)
  • 3.938 in (2)
  • 3.976 in (2)
  • 4.213 in (2)
  • 4.331 in (4)
  • 4.37 in (6)
  • 4.961 in (1)
  • 5.551 in (2)
  • 5.945 in (1)
  • 6.694 in (3)
  • 7.875 in (4)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (6)
  • 50.0 mm (6)
  • 55.0 mm (1)
  • 57.0 mm (2)
  • 63.0 mm (3)
  • 64.5 mm (4)
  • 65.0 mm (3)
  • 75.0 mm (2)
  • 90.0 mm (2)
  • 100.0 mm (2)
  • 101.0 mm (2)
  • 107.0 mm (2)
  • 110.0 mm (4)
  • 111.0 mm (6)
  • 126.0 mm (1)
  • 141.0 mm (2)
  • 151.0 mm (1)
  • 170.0 mm (3)
  • 200.0 mm (4)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (56)
  • 0.016 in (56)
  • 0.031 in (56)
  • 0.047 in (56)
  • 0.063 in (56)
  • 0.079 in (56)
  • 0.094 in (56)
  • 0.122 in (56)
  • 0.157 in (56)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (56)
  • 0.4 mm (56)
  • 0.8 mm (56)
  • 1.201 mm (56)
  • 1.6 mm (56)
  • 2.0 mm (56)
  • 2.375 mm (56)
  • 3.1 mm (56)
  • 4.0 mm (56)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (56)
  • KC422M (56)
  • KC520M (56)
  • KC522M (56)
  • KC725M (56)
  • KCK15 (56)
  • KCK20B (56)
  • KCPK30 (56)
  • KCPM20 (56)
  • KCPM40 (56)
  • KCSM30 (56)
  • KCSM40 (56)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.9 (1)
  • 1.2 (2)
  • 1.5 (2)
  • 1.9 (2)
  • 1.95 (1)
  • 2.5 (6)
  • 3.5 (5)
  • 4.8 (14)
  • 6.8 (11)
  • 10.5 (7)
  • 10.7 (1)
  • 16.6 (4)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • E-PARALLELOGRAM 70 (56)
  • X-PARALLELOGRAM 70 (56)
Neck Diameter
Neck Diameter
  • 1.24 in (4)
  • 1.555 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 31.5 mm (4)
  • 39.5 mm (1)
Neck Diameter Min komu Neck Diameter Max
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (29)
  • SCREW-ON (7)
  • SHELL MILL (20)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 20.0 mm (3)
  • 21.0 mm (2)
  • 22.0 mm (6)
  • 25.0 mm (8)
  • 27.0 mm (7)
  • 29.0 mm (4)
  • 32.0 mm (19)
  • 40.0 mm (4)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.787 in (3)
  • 0.828 in (2)
  • 0.866 in (6)
  • 0.984 in (8)
  • 1.063 in (7)
  • 1.143 in (4)
  • 1.26 in (19)
  • 1.575 in (4)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

Mill 1-14™ • Helical Shell Mill • Metric

(7) Mill 1-14™ • Helical Shell Mill • Metric

Mill 1-14™ • End Mill • Cylindrical Shank • Metric

(9) Mill 1-14™ • End Mill • Cylindrical Shank • Metric

Mill 1-14™ • End Mill • Screw-On • Metric

(7) Mill 1-14™ • End Mill • Screw-On • Metric

Mill 1-14™ • End Mill • Long • Cylindrical Shank • Metric

(7) Mill 1-14™ • End Mill • Long • Cylindrical Shank • Metric

Mill 1-14™ • Shell Mill • Metric

(13) Mill 1-14™ • Shell Mill • Metric

Mill 1-14™ • Helical End Mill • Weldon® Shank • Metric

(6) Mill 1-14™ • Helical End Mill • Weldon® Shank • Metric

Mill 1-14™ • End Mill • Weldon Shank • Metric

(7) Mill 1-14™ • End Mill • Weldon Shank • Metric
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?