Country

Jazyk

Měrná jednotka

Ceníková cena:

Sleva: %

Ceníková cena:

$2,160.65 /každý

Vaše cena::

Počet

Slot milling cutter for side milling in multiple materials

KSSM™ 12 • Slot Mill with Arbor Mount • Adjustable Cutting Width up to 18mm • Left Hand Cutting • Metric

Name: KSSM™ 12 • Slot Mill with Arbor Mount • Adjustable Cutting Width up to 18mm • Left Hand Cutting • Metric
SKU: 2443463
Rating: 0 (0 reviews)

Slot milling cutter for side milling in multiple materials

Metrické

Palcové

SAP Material Number	2443463
ISO Catalog Number	160H10LK90SD12N18K
ANSI Catalog Number	160H10LK90SD12N18K
[D1] Effective Cutting Diameter	160 mm
[D1] Effective Cutting Diameter	6.299 in
[D] Adapter / Shank / Bore Diameter	40 mm
[D] Adapter / Shank / Bore Diameter	1.574 in
[D6] Hub Diameter	54.75 mm
[D6] Hub Diameter	2.155 in
[CDX] Radial Maximum Depth of Cut	51.5 mm
[CDX] Radial Maximum Depth of Cut	2.028 in
[L1] Gage Length	18.18 mm
[L1] Gage Length	.712 in
[THUB] Hub Thickness	18.18 mm
[THUB] Hub Thickness	.718 in
[V] Adjustment Range	1.32 mm
MIL_ADJUSTMENT_RANGE_I	.052 in
[AP1MAX] 1st Maximum Cutting Depth	11.709 mm
[AP1MAX] 1st Maximum Cutting Depth	.461 in
Number of Inserts	10
Number of Effective Cutting Edges on Face	10
Max RPM	9150
Weight Kilograms	1.8

Zobrazit všechny varianty produktů

Použití

Side Milling/Shoulder Milling: Square End

Materiály obrobků

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Vlastnosti a výhody

Unique cam adjustment mechanism enables quick tool setting and cutting width adjustment.

Cutter body features two keyways for staggered arbor mounting.

Use right-hand and left-hand inserts for best possible wall surface finish.

Strana stroje

načítání...

Strana obrobku

načítání...

Výběr břitové destičky

KSSM™ 12 Slotting • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1-P2	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
P3-P4	.E..LD2	KCPM40	.E..GB2	KCPK30	.S..GB2	KCPK30
P5-P6	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
M1-M2	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
M3	.E..LD2	KCPM40	.E..GB2	KCPM40	.S..GB2	KCPM40
K1-K2	.E..LD2	KCK20B	.E..GB2	KCK15	.S..GB2	KCK15
K3	.E..LD2	KCK20B	.E..GB2	KCK20B	.S..GB2	KCK20B
N1-N2	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
N3	.F..LE	KC410M	.F..LE	KC410M	.F..LE	KC410M
S1-S2	.E..LD2	KC725M	.E..GB2	KC725M	.S..GB2	KC725M
S3	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
S4	.E..LD2	KCSM40	.E..GB2	KCSM40	.S..GB2	KCSM40
H1	–	–	–	–	–	–

Doporučené počáteční hodnoty posuvů [mm]

KSSM™ 12 Slotting • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LE	0,12	0,42	0,74	0,08	0,30	0,54	0,06	0,23	0,40	0,06	0,20	0,35	0,05	0,18	0,32
.E..LD2	0,12	0,46	0,81	0,09	0,33	0,58	0,07	0,25	0,43	0,06	0,22	0,38	0,05	0,20	0,35
.E..GB2	0,23	0,53	0,89	0,17	0,38	0,64	0,13	0,29	0,48	0,11	0,25	0,41	0,10	0,23	0,38
.S..GB2	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

KSSM™ 12 Slotting • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LE	0.005	0.017	0.030	0.003	0.012	0.021	0.003	0.009	0.016	0.002	0.008	0.014	0.002	0.007	0.013
.E..LD2	0.005	0.018	0.032	0.004	0.013	0.023	0.003	0.010	0.017	0.002	0.009	0.015	0.002	0.008	0.014
.E..GB2	0.009	0.021	0.035	0.007	0.015	0.025	0.005	0.011	0.019	0.004	0.010	0.016	0.004	0.009	0.015
.S..GB2	0.009	0.023	0.037	0.007	0.017	0.027	0.005	0.013	0.020	0.004	0.011	0.017	0.004	0.010	0.016
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Doporučené počáteční řezné rychlosti [m/min]

KSSM™ 12 Slotting • Recommended Starting Speed [m/min]
Grade		KCPM20			KC410M			KC522M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40			KTPK20
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	550	485	450	–	–	–	330	285	270	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	350	320	300	365	300	255
	2	340	310	275	–	–	–	275	240	200	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	300	270	220	265	220	200
	3	310	275	255	–	–	–	255	215	175	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	280	240	195	245	200	180
	4	230	215	190	–	–	–	225	185	150	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	240	205	165	210	180	160
	5	275	250	230	–	–	–	185	170	150	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	200	180	160	185	170	150
	6	190	170	145	–	–	–	165	125	100	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	180	140	100	160	130	100
M	1	225	200	175	–	–	–	205	180	165	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	260	210	185	240	195	165
	2	205	175	160	–	–	–	185	160	130	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	235	180	145	215	185	150
	3	160	145	125	–	–	–	140	120	95	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	175	145	110	160	135	110
K	1	360	325	295	–	–	–	230	205	185	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–	230	195	160
	2	285	255	235	–	–	–	180	160	150	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–	185	150	130
	3	240	215	200	–	–	–	150	135	120	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–	150	130	105
N	1	–	–	–	1215	1080	995	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	1080	995	915	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	1080	995	915	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	50	40	25	–	–	–
	2	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	55	40	25	–	–	–
	3	–	–	–	–	–	–	50	40	25	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	65	45	30	–	–	–
	4	–	–	–	–	–	–	50	45	35	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	75	60	40	–	–	–
H	1	–	–	–	–	–	–	120	90	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KSSM™ 12 Slotting • Recommended Starting Speed [SFM]
Grade		KCPM20			KC410M			KC522M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40			KTPK20
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	550	485	450	–	–	–	1085	935	885	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1150	1050	985	1200	985	835
	2	340	310	275	–	–	–	900	785	655	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	985	885	720	870	720	655
	3	310	275	255	–	–	–	835	705	575	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	920	785	640	805	655	590
	4	230	215	190	–	–	–	740	605	490	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	785	675	540	690	590	525
	5	275	250	230	–	–	–	605	560	490	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	655	590	525	605	560	490
	6	190	170	145	–	–	–	540	410	330	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	590	460	330	525	425	330
M	1	225	200	175	–	–	–	675	590	540	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	855	690	605	785	640	540
	2	205	175	160	–	–	–	605	525	425	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	770	590	475	705	605	490
	3	160	145	125	–	–	–	460	395	310	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	575	475	360	525	445	360
K	1	360	325	295	–	–	–	755	675	605	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	–	–	–	755	640	525
	2	285	255	235	–	–	–	590	525	490	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	–	–	–	605	490	425
	3	240	215	200	–	–	–	490	445	395	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	–	–	–	490	425	345
N	1	–	–	–	3985	3545	3265	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	130	115	80	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	165	130	80	–	–	–
	2	–	–	–	–	–	–	130	115	80	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80	–	–	–
	3	–	–	–	–	–	–	165	130	80	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100	–	–	–
	4	–	–	–	–	–	–	165	150	115	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	245	195	130	–	–	–
H	1	–	–	–	–	–	–	395	295	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Katalogové číslo ISO	Karbid

Vítejte

Potvrďte své předvolby

Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

kontaktujte obchodni oddělení

kontaktujte obchodni oddělení

Úprava řešení

Přidání řešení

KSSM™ 12 • Slot Mill with Arbor Mount • Adjustable Cutting Width up to 18mm • Left Hand Cutting • Metric

Slot milling cutter for side milling in multiple materials

Použití

Materiály obrobků

Vlastnosti a výhody

Strana stroje

Strana obrobku

Výběr břitové destičky

Doporučené počáteční hodnoty posuvů [mm]

Doporučené počáteční řezné rychlosti [m/min]

Návrhy produktů

Product Family suggestions

kontaktujte obchodni oddělení

Oznámení

kontaktujte obchodni oddělení

Sending to SolidCAM in progress...

KSSM™ 12 • Slot Mill with Arbor Mount • Adjustable Cutting Width up to 18mm • Left Hand Cutting • Metric

Slot milling cutter for side milling in multiple materials

Použití

Materiály obrobků

Vlastnosti a výhody

Strana stroje

Strana obrobku

Výběr břitové destičky

Doporučené počáteční hodnoty posuvů [mm]

Doporučené počáteční řezné rychlosti [m/min]

The following files are available