successfully added to cart
View Cart

Notifications

Mark all as read

Modulare Bohrer

Select Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (570)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (570)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (570)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (570)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (570)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (543)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (534)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (534)
  • M Stainless Steel (461)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (461)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (461)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (447)
  • K Cast Iron (566)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (566)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (566)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (566)
  • N Non-Ferrous Materials (313)
    • N1
      Wrought Aluminum
      (312)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (312)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (312)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (298)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (275)
    • N6
      Carbon, Graphite Composites, CFRP
      (266)
    • N7
      MMC's
      (262)
  • S High-Temp Alloys (322)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (290)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (290)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (290)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (322)
  • H Hardened Materials (62)
    • H1
      Hardened Materials 44-48 HRC
      (62)
    • H2
      Hardened Materials 48-55 HRC
      (31)
    • H3
      Hardened Materials 56-60 HRC
      (31)
    • H4
      Hardened Materials >60 HRC
      (31)
  • C CFRP Materials (32)
    • C1
      CFRP, CFRP / CFRP
      (12)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (32)
    • C3
      CFRP / Titanium CFRP / High Temp
      (32)
    • C4
      CFRP / Stainless Steel
      (32)
Select First Choice
  • BR (142)
  • CN (630)
  • DE (679)
  • GB (426)
  • IN (244)
  • SG (313)
  • US (715)
Applications
Applications
  • Drilling Drilling (234)
  • Inclined Entry Drilling Inclined Entry Drilling (84)
  • Inclined Exit Drilling Inclined Exit Drilling (84)
  • Stacked Plates Drilling Stacked Plates Drilling (198)
Cutting Diameter
Cutting Diameter
  • 0.414 in (4)
  • 0.492 in (6)
  • 0.512 in (8)
  • 0.531 in (5)
  • 0.551 in (8)
  • 0.572 in (5)
  • 0.591 in (8)
  • 0.61 in (4)
  • 0.63 in (8)
  • 0.65 in (7)
  • 0.669 in (8)
  • 0.69 in (7)
  • 0.709 in (8)
  • 0.748 in (8)
  • 0.768 in (4)
  • 0.787 in (8)
  • 0.807 in (5)
  • 0.828 in (8)
  • 0.846 in (6)
  • 0.866 in (8)
  • 0.886 in (5)
  • 0.906 in (8)
  • 0.925 in (4)
  • 0.946 in (8)
  • 0.965 in (4)
  • 0.984 in (8)
  • 1.024 in (7)
  • 1.043 in (4)
  • 1.063 in (4)
  • 1.102 in (5)
  • 1.181 in (6)
  • 1.26 in (6)
  • 1.299 in (5)
  • 12.5 in (5)
  • 12.6 in (5)
  • 12.7 in (5)
  • 12.8 in (5)
  • 13.0 in (6)
  • 13.2 in (5)
  • 13.5 in (6)
  • 13.6 in (5)
  • 13.7 in (5)
  • 13.8 in (5)
  • 14.0 in (9)
  • 14.1 in (8)
  • 14.2 in (8)
  • 14.4 in (8)
  • 14.5 in (9)
  • 14.6 in (5)
  • 14.8 in (5)
  • 15.0 in (8)
  • 15.3 in (7)
  • 15.5 in (8)
  • 15.6 in (5)
  • 15.7 in (5)
  • 15.8 in (5)
  • 16.0 in (8)
  • 16.1 in (8)
  • 16.15 in (8)
  • 16.2 in (8)
  • 16.5 in (10)
  • 16.6 in (6)
  • 16.67 in (6)
  • 17.0 in (9)
  • 17.5 in (11)
  • 17.6 in (8)
  • 17.7 in (8)
  • 17.8 in (8)
  • 17.9 in (8)
  • 18.0 in (12)
  • 18.5 in (6)
  • 18.6 in (6)
  • 18.8 in (6)
  • 18.9 in (6)
  • 19.0 in (10)
  • 19.05 in (8)
  • 19.2 in (8)
  • 19.228 in (8)
  • 19.5 in (10)
  • 19.7 in (6)
  • 20.0 in (6)
  • 20.1 in (6)
  • 20.5 in (7)
  • 21.0 in (6)
  • 21.1 in (5)
  • 21.15 in (5)
  • 21.2 in (5)
  • 21.5 in (6)
  • 22.0 in (7)
  • 23.0 in (5)
  • 23.5 in (5)
  • 24.0 in (6)
  • 25.0 in (7)
  • 25.07 in (5)
  • 25.25 in (5)
  • 25.3 in (5)
  • 25.4 in (5)
  • 25.5 in (5)
  • 25.54 in (5)
  • 26.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 8.0 mm (7)
  • 8.1 mm (5)
  • 8.5 mm (7)
  • 9.0 mm (7)
  • 9.1 mm (5)
  • 9.3 mm (5)
  • 9.5 mm (5)
  • 10.0 mm (7)
  • 10.3 mm (7)
  • 10.4 mm (5)
  • 10.5 mm (8)
  • 10.8 mm (7)
  • 11.0 mm (7)
  • 11.3 mm (5)
  • 11.4 mm (5)
  • 11.5 mm (7)
  • 11.8 mm (5)
  • 12.0 mm (7)
  • 12.5 mm (11)
  • 12.6 mm (5)
  • 12.7 mm (5)
  • 12.8 mm (6)
  • 13.0 mm (14)
  • 13.2 mm (5)
  • 13.3 mm (5)
  • 13.5 mm (11)
  • 13.6 mm (5)
  • 13.7 mm (5)
  • 13.8 mm (6)
  • 14.0 mm (17)
  • 14.1 mm (8)
  • 14.2 mm (8)
  • 14.3 mm (7)
  • 14.4 mm (8)
  • 14.5 mm (14)
  • 14.6 mm (5)
  • 14.8 mm (6)
  • 15.0 mm (16)
  • 15.3 mm (9)
  • 15.5 mm (12)
  • 15.6 mm (5)
  • 15.7 mm (5)
  • 15.8 mm (7)
  • 16.0 mm (16)
  • 16.1 mm (10)
  • 16.15 mm (8)
  • 16.2 mm (8)
  • 16.3 mm (5)
  • 16.5 mm (17)
  • 16.6 mm (8)
  • 16.67 mm (6)
  • 16.7 mm (5)
  • 16.8 mm (5)
  • 17.0 mm (17)
  • 17.2 mm (6)
  • 17.5 mm (18)
  • 17.6 mm (10)
  • 17.7 mm (9)
  • 17.8 mm (9)
  • 17.9 mm (8)
  • 18.0 mm (20)
  • 18.3 mm (5)
  • 18.5 mm (9)
  • 18.6 mm (8)
  • 18.8 mm (7)
  • 18.9 mm (6)
  • 19.0 mm (18)
  • 19.05 mm (9)
  • 19.1 mm (5)
  • 19.2 mm (8)
  • 19.228 mm (8)
  • 19.25 mm (5)
  • 19.3 mm (5)
  • 19.35 mm (5)
  • 19.5 mm (14)
  • 19.7 mm (6)
  • 19.85 mm (7)
  • 20.0 mm (14)
  • 20.1 mm (7)
  • 20.5 mm (12)
  • 21.0 mm (14)
  • 21.5 mm (12)
  • 22.0 mm (15)
  • 22.5 mm (9)
  • 23.0 mm (13)
  • 23.5 mm (9)
  • 24.0 mm (14)
  • 24.5 mm (8)
  • 25.0 mm (15)
  • 25.5 mm (7)
  • 26.0 mm (12)
  • 26.5 mm (6)
  • 27.0 mm (8)
  • 28.0 mm (8)
  • 29.0 mm (7)
  • 30.0 mm (9)
  • 31.0 mm (7)
  • 32.0 mm (9)
  • 33.0 mm (7)
  • 34.0 mm (6)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (72)
  • Stable (74)
  • Unstable (74)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 20.0 mm (13)
  • 22.0 mm (1)
  • 25.0 mm (20)
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (17)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (3)
  • 43.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (4)
  • 48.0 mm (6)
  • 50.0 mm (2)
  • 51.0 mm (2)
  • 53.0 mm (2)
  • 54.0 mm (6)
  • 55.0 mm (2)
  • 57.0 mm (2)
  • 58.0 mm (2)
  • 60.0 mm (8)
  • 63.0 mm (3)
  • 65.0 mm (2)
  • 66.0 mm (3)
  • 68.0 mm (2)
  • 69.0 mm (1)
  • 70.0 mm (7)
  • 72.0 mm (4)
  • 73.0 mm (2)
  • 75.0 mm (3)
  • 78.0 mm (5)
  • 80.0 mm (7)
  • 84.0 mm (3)
  • 85.0 mm (2)
  • 90.0 mm (8)
  • 95.0 mm (2)
  • 95.5 mm (1)
  • 96.0 mm (2)
  • 99.0 mm (2)
  • 100.0 mm (6)
  • 102.0 mm (1)
  • 105.0 mm (1)
  • 106.301 mm (1)
  • 110.0 mm (4)
  • 112.0 mm (2)
  • 115.0 mm (1)
  • 120.0 mm (5)
  • 125.0 mm (1)
  • 126.0 mm (3)
  • 130.0 mm (4)
  • 137.5 mm (1)
  • 140.0 mm (6)
  • 150.0 mm (4)
  • 154.0 mm (2)
  • 160.0 mm (5)
  • 175.0 mm (1)
  • 180.0 mm (1)
  • 190.0 mm (1)
  • 200.0 mm (1)
  • 220.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.031 in (13)
  • 0.034 in (1)
  • 0.038 in (20)
  • 0.04 in (2)
  • 0.042 in (2)
  • 0.045 in (2)
  • 0.046 in (17)
  • 0.049 in (2)
  • 0.052 in (2)
  • 0.054 in (8)
  • 0.056 in (5)
  • 0.06 in (4)
  • 0.064 in (2)
  • 0.065 in (3)
  • 0.067 in (2)
  • 0.068 in (2)
  • 0.07 in (4)
  • 0.075 in (6)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.082 in (2)
  • 0.084 in (6)
  • 0.087 in (2)
  • 0.089 in (2)
  • 0.09 in (2)
  • 0.093 in (8)
  • 0.097 in (3)
  • 0.1 in (2)
  • 0.103 in (3)
  • 0.105 in (2)
  • 0.107 in (1)
  • 0.108 in (7)
  • 0.111 in (4)
  • 0.113 in (2)
  • 0.116 in (3)
  • 0.121 in (5)
  • 0.124 in (7)
  • 0.13 in (3)
  • 0.132 in (2)
  • 0.14 in (8)
  • 0.148 in (3)
  • 0.149 in (2)
  • 0.154 in (2)
  • 0.155 in (6)
  • 0.158 in (1)
  • 0.162 in (1)
  • 0.164 in (1)
  • 0.17 in (4)
  • 0.174 in (2)
  • 0.178 in (1)
  • 0.186 in (5)
  • 0.194 in (1)
  • 0.195 in (3)
  • 0.202 in (4)
  • 0.214 in (1)
  • 0.217 in (6)
  • 0.232 in (4)
  • 0.24 in (2)
  • 0.248 in (5)
  • 0.272 in (1)
  • 0.279 in (1)
  • 0.294 in (1)
  • 0.31 in (1)
  • 0.341 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (13)
  • 0.866 in (1)
  • 0.917 in (4)
  • 0.935 in (4)
  • 0.944 in (4)
  • 0.984 in (8)
  • 1.101 in (4)
  • 1.114 in (4)
  • 1.181 in (7)
  • 1.272 in (4)
  • 1.298 in (2)
  • 1.343 in (1)
  • 1.395 in (1)
  • 1.407 in (1)
  • 1.417 in (3)
  • 1.465 in (1)
  • 1.488 in (1)
  • 1.543 in (1)
  • 1.563 in (1)
  • 1.622 in (1)
  • 1.643 in (1)
  • 1.697 in (1)
  • 1.72 in (1)
  • 1.776 in (1)
  • 1.795 in (1)
  • 1.846 in (1)
  • 1.874 in (1)
  • 1.929 in (1)
  • 1.945 in (1)
  • 2.0 in (1)
  • 2.012 in (1)
  • 2.028 in (1)
  • 2.075 in (1)
  • 2.083 in (1)
  • 2.098 in (1)
  • 2.102 in (1)
  • 2.15 in (1)
  • 2.173 in (1)
  • 2.181 in (1)
  • 2.236 in (2)
  • 2.244 in (1)
  • 2.303 in (1)
  • 2.307 in (1)
  • 2.311 in (1)
  • 2.323 in (1)
  • 2.331 in (1)
  • 2.354 in (1)
  • 2.398 in (1)
  • 2.41 in (1)
  • 2.461 in (1)
  • 2.469 in (1)
  • 2.524 in (1)
  • 2.547 in (1)
  • 2.563 in (1)
  • 2.606 in (1)
  • 2.638 in (1)
  • 2.642 in (1)
  • 2.677 in (2)
  • 2.701 in (1)
  • 2.717 in (1)
  • 2.781 in (1)
  • 2.791 in (1)
  • 2.854 in (1)
  • 2.874 in (1)
  • 2.886 in (1)
  • 2.93 in (1)
  • 2.953 in (4)
  • 3.0 in (1)
  • 3.004 in (1)
  • 3.012 in (1)
  • 3.024 in (1)
  • 3.106 in (1)
  • 3.13 in (1)
  • 3.142 in (1)
  • 3.161 in (1)
  • 3.244 in (1)
  • 3.253 in (1)
  • 3.269 in (3)
  • 3.287 in (1)
  • 3.339 in (1)
  • 3.386 in (1)
  • 3.426 in (5)
  • 3.622 in (3)
  • 3.938 in (7)
  • 4.291 in (4)
  • 4.37 in (3)
  • 4.606 in (3)
  • 4.843 in (2)
  • 4.921 in (2)
  • 5.315 in (2)
  • 5.354 in (2)
  • 5.394 in (3)
  • 5.787 in (3)
  • 5.827 in (6)
  • 6.339 in (3)
  • 6.811 in (3)
  • 7.047 in (2)
  • 7.087 in (2)
  • 7.283 in (4)
  • 7.835 in (4)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (13)
  • 22.0 mm (1)
  • 23.3 mm (4)
  • 23.75 mm (4)
  • 23.951 mm (4)
  • 25.0 mm (8)
  • 27.975 mm (4)
  • 28.3 mm (4)
  • 30.0 mm (7)
  • 32.301 mm (4)
  • 32.975 mm (2)
  • 34.1 mm (1)
  • 35.4 mm (1)
  • 35.7 mm (1)
  • 36.0 mm (3)
  • 37.2 mm (1)
  • 37.801 mm (1)
  • 39.2 mm (1)
  • 39.7 mm (1)
  • 41.2 mm (1)
  • 41.7 mm (1)
  • 43.1 mm (1)
  • 43.7 mm (1)
  • 45.1 mm (1)
  • 45.6 mm (1)
  • 46.901 mm (1)
  • 47.6 mm (1)
  • 49.0 mm (1)
  • 49.401 mm (1)
  • 50.801 mm (1)
  • 51.1 mm (1)
  • 51.5 mm (1)
  • 52.7 mm (1)
  • 52.901 mm (1)
  • 53.301 mm (1)
  • 53.401 mm (1)
  • 54.6 mm (1)
  • 55.2 mm (1)
  • 55.401 mm (1)
  • 56.801 mm (2)
  • 57.0 mm (1)
  • 58.5 mm (1)
  • 58.6 mm (1)
  • 58.7 mm (1)
  • 59.0 mm (1)
  • 59.2 mm (1)
  • 59.801 mm (1)
  • 60.901 mm (1)
  • 61.2 mm (1)
  • 62.5 mm (1)
  • 62.7 mm (1)
  • 64.101 mm (1)
  • 64.7 mm (1)
  • 65.101 mm (1)
  • 66.2 mm (1)
  • 67.0 mm (1)
  • 67.101 mm (1)
  • 68.0 mm (2)
  • 68.601 mm (1)
  • 69.0 mm (1)
  • 70.601 mm (1)
  • 70.9 mm (1)
  • 72.5 mm (1)
  • 73.0 mm (1)
  • 73.3 mm (1)
  • 74.4 mm (1)
  • 75.0 mm (4)
  • 76.2 mm (1)
  • 76.3 mm (1)
  • 76.5 mm (1)
  • 76.801 mm (1)
  • 78.9 mm (1)
  • 79.5 mm (1)
  • 79.801 mm (1)
  • 80.301 mm (1)
  • 82.4 mm (1)
  • 82.601 mm (1)
  • 83.0 mm (3)
  • 83.5 mm (1)
  • 84.801 mm (1)
  • 86.0 mm (1)
  • 87.0 mm (5)
  • 92.0 mm (3)
  • 100.0 mm (7)
  • 109.0 mm (4)
  • 111.0 mm (3)
  • 117.0 mm (3)
  • 123.0 mm (2)
  • 125.0 mm (2)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 137.0 mm (3)
  • 147.0 mm (3)
  • 148.0 mm (6)
  • 161.0 mm (3)
  • 173.0 mm (3)
  • 179.0 mm (2)
  • 180.0 mm (2)
  • 185.0 mm (4)
  • 199.0 mm (4)
Reach Min to Reach Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (50)