Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

HSS Tapping

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1164)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1127)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1127)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1084)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (972)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (37)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (234)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (37)
  • M Stainless Steel (1111)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1111)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (231)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (980)
  • K Cast Iron (834)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (81)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (834)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (81)
  • N Non-Ferrous Materials (309)
    • N1
      Wrought Aluminum
      (213)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (232)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (194)
  • S High-Temp Alloys (557)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (224)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (203)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (203)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (130)
Select First Choice
  • BR (23)
  • CN (100)
  • DE (179)
  • GB (75)
  • IN (10)
  • SG (54)
  • US (355)
Applications
Applications
  • Pipe Thread Pipe Thread (43)
  • Tapping Blind Hole Tapping Blind Hole (1100)
  • Tapping Through Hole Tapping Through Hole (799)
  • Threading Threading (1839)
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 6.0 mm (4)
  • 7.0 mm (24)
  • 7.9 mm (25)
  • 8.0 mm (36)
  • 8.1 mm (10)
  • 8.201 mm (1)
  • 9.0 mm (14)
  • 9.1 mm (27)
  • 9.5 mm (1)
  • 9.701 mm (47)
  • 9.9 mm (8)
  • 10.0 mm (104)
  • 10.101 mm (1)
  • 10.5 mm (2)
  • 10.8 mm (1)
  • 10.9 mm (2)
  • 11.0 mm (16)
  • 11.101 mm (54)
  • 11.201 mm (11)
  • 11.5 mm (2)
  • 11.601 mm (11)
  • 11.701 mm (1)
  • 11.8 mm (11)
  • 11.9 mm (3)
  • 12.0 mm (66)
  • 12.101 mm (14)
  • 12.201 mm (6)
  • 12.4 mm (48)
  • 12.5 mm (3)
  • 12.701 mm (47)
  • 13.0 mm (94)
  • 13.101 mm (3)
  • 13.201 mm (5)
  • 13.4 mm (16)
  • 14.0 mm (18)
  • 14.201 mm (25)
  • 14.8 mm (10)
  • 14.9 mm (3)
  • 15.0 mm (170)
  • 15.101 mm (42)
  • 15.201 mm (8)
  • 15.8 mm (2)
  • 16.0 mm (88)
  • 17.0 mm (8)
  • 17.3 mm (3)
  • 17.475 mm (3)
  • 17.5 mm (42)
  • 18.0 mm (95)
  • 18.7 mm (3)
  • 18.901 mm (2)
  • 19.0 mm (12)
  • 19.05 mm (8)
  • 19.1 mm (34)
  • 19.6 mm (44)
  • 20.0 mm (74)
  • 21.0 mm (25)
  • 21.1 mm (4)
  • 22.0 mm (22)
  • 22.3 mm (8)
  • 22.401 mm (14)
  • 23.0 mm (10)
  • 23.1 mm (21)
  • 23.901 mm (40)
  • 24.0 mm (25)
  • 25.0 mm (38)
  • 25.401 mm (29)
  • 26.0 mm (1)
  • 26.201 mm (8)
  • 27.0 mm (2)
  • 27.701 mm (41)
  • 28.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (30)
  • 31.0 mm (14)
  • 31.8 mm (3)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.926 mm (7)
  • 35.0 mm (26)
  • 36.0 mm (4)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 40.0 mm (18)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 45.0 mm (10)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (4)
  • 0.237 in (4)
  • 0.276 in (24)
  • 0.311 in (25)
  • 0.315 in (36)
  • 0.319 in (10)
  • 0.323 in (1)
  • 0.354 in (14)
  • 0.358 in (27)
  • 0.374 in (1)
  • 0.382 in (47)
  • 0.39 in (8)
  • 0.394 in (104)
  • 0.398 in (1)
  • 0.414 in (2)
  • 0.425 in (1)
  • 0.429 in (2)
  • 0.433 in (16)
  • 0.437 in (54)
  • 0.441 in (11)
  • 0.453 in (2)
  • 0.457 in (11)
  • 0.461 in (1)
  • 0.465 in (11)
  • 0.47 in (3)
  • 0.473 in (66)
  • 0.477 in (14)
  • 0.48 in (6)
  • 0.488 in (48)
  • 0.492 in (3)
  • 0.5 in (47)
  • 0.512 in (94)
  • 0.516 in (3)
  • 0.52 in (5)
  • 0.528 in (16)
  • 0.551 in (18)
  • 0.559 in (25)
  • 0.583 in (10)
  • 0.587 in (3)
  • 0.591 in (170)
  • 0.595 in (42)
  • 0.598 in (8)
  • 0.622 in (2)
  • 0.63 in (88)
  • 0.669 in (8)
  • 0.681 in (3)
  • 0.689 in (3)
  • 0.69 in (42)
  • 0.709 in (95)
  • 0.736 in (3)
  • 0.744 in (2)
  • 0.748 in (12)
  • 0.75 in (8)
  • 0.752 in (34)
  • 0.772 in (44)
  • 0.787 in (74)
  • 0.828 in (25)
  • 0.832 in (4)
  • 0.866 in (22)
  • 0.878 in (8)
  • 0.882 in (14)
  • 0.906 in (10)
  • 0.909 in (21)
  • 0.942 in (40)
  • 0.946 in (25)
  • 0.984 in (38)
  • 1.0 in (29)
  • 1.024 in (1)
  • 1.032 in (8)
  • 1.063 in (2)
  • 1.091 in (41)
  • 1.102 in (1)
  • 1.143 in (1)
  • 1.181 in (30)
  • 1.22 in (14)
  • 1.252 in (3)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.339 in (5)
  • 1.375 in (7)
  • 1.379 in (26)
  • 1.417 in (4)
  • 1.496 in (1)
  • 1.5 in (6)
  • 1.575 in (18)
  • 1.655 in (4)
  • 1.713 in (4)
  • 1.75 in (2)
  • 1.772 in (10)
  • 1.891 in (2)
  • 1.969 in (4)
  • 2.165 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • G Internal Thread Parallel (15)
  • M-Metric/ISO (828)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (12)
  • UNC (567)
  • UNF (391)
  • UNJ (18)
Thread Size
Thread Size
  • 1 - 11 (2)
  • 1 - 11 1/2 (2)
  • 1 - 12 (3)
  • 1 - 8 (10)
  • 1 1/2 - 12 (1)
  • 1 1/2 - 6 (2)
  • 1 1/4 - 12 (1)
  • 1 1/4 - 7 (3)
  • 1 1/8 - 12 (2)
  • 1 1/8 - 7 (4)
  • 1 3/4 - 5 (1)
  • 1 3/8 - 12 (1)
  • 1 3/8 - 6 (1)
  • 1/16 - 27 (3)
  • 1/2 - 13 (51)
  • 1/2 - 14 (6)
  • 1/2 - 20 (40)
  • 1/4 - 18 (4)
  • 1/4 - 19 (2)
  • 1/4 - 20 (63)
  • 1/4 - 28 (62)
  • 1/8 - 27 (8)
  • 1/8 - 28 (3)
  • 10 - 24 (40)
  • 10 - 32 (60)
  • 12 - 24 (3)
  • 12 - 28 (3)
  • 2 - 4 1/2 (1)
  • 2 - 56 (18)
  • 3 - 48 (2)
  • 3/4 - 10 (18)
  • 3/4 - 14 (5)
  • 3/4 - 16 (15)
  • 3/8 - 16 (58)
  • 3/8 - 18 (4)
  • 3/8 - 19 (2)
  • 3/8 - 24 (51)
  • 4 - 40 (47)
  • 4 - 48 (5)
  • 5 - 40 (7)
  • 5/16 - 18 (59)
  • 5/16 - 24 (53)
  • 5/16- 24 (4)
  • 5/8 - 11 (32)
  • 5/8 - 18 (24)
  • 6 - 32 (53)
  • 6 - 40 (14)
  • 7/16 - 14 (32)
  • 7/16 - 20 (44)
  • 7/8 - 14 (4)
  • 7/8 - 9 (5)
  • 8 - 32 (57)
  • 8 - 36 (6)
  • 9/16 - 12 (8)
  • 9/16 - 18 (10)
  • M10 X 0,75 (2)
  • M10 X 1 (15)
  • M10 X 1,25 (25)
  • M10 X 1,5 (60)
  • M10 X 1,50 (3)
  • M12 X 1 (3)
  • M12 X 1,25 (16)
  • M12 X 1,5 (28)
  • M12 X 1,75 (57)
  • M14 X 1 (3)
  • M14 X 1,25 (6)
  • M14 X 1,5 (25)
  • M14 X 2 (32)
  • M16 X 1,5 (29)
  • M16 X 2 (36)
  • M16 X 2,0 (3)
  • M18 X 1,5 (14)
  • M18 X 2 (4)
  • M18 X 2,5 (16)
  • M2 X 0,4 (7)
  • M2,5 X 0,45 (10)
  • M20 X 1,5 (3)
  • M20 X 2 (3)
  • M20 X 2,5 (14)
  • M22 X 1,5 (3)
  • M22 X 2 (3)
  • M22 X 2,5 (5)
  • M24 X 1,5 (3)
  • M24 X 2 (2)
  • M24 X 3 (15)
  • M27 X 3 (3)
  • M3 X 0,5 (43)
  • M3,5 X 0,6 (6)
  • M30 X 1,5 (2)
  • M30 X 3,5 (14)
  • M33 X 3,5 (12)
  • M36 X 4 (14)
  • M4 X 0,7 (43)
  • M42 X 4,5 (12)
  • M5 X 0,8 (56)
  • M6 X 0,75 (3)
  • M6 X 1 (62)
  • M7 X 1 (11)
  • M8 X 1 (26)
  • M8 X 1,25 (64)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2B (104)
  • 2BX (51)
  • 3B (35)
  • 3BX (134)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6G-I (23)
  • 6H-I (284)
  • 6HX-I (338)
Tap PD Class
Tap PD Class
  • 0 (36)
  • 6G (8)
  • 6H (17)
  • D10 (3)
  • D11 (8)
  • D12 (5)
  • D3 (19)
  • D4 (31)
  • D5 (51)
  • D6 (41)
  • D7 (11)
  • D8 (4)
  • D9 (11)
  • H10 (3)
  • H2 (70)
  • H3 (305)
  • H4 (52)
  • H5 (135)
  • H6 (34)
  • H7 (54)
Tap Tolerance Class
Tap Tolerance Class
  • ISO 2 (225)
  • ISO 3 (24)
Connection Style
Connection Style
  • Cylindrical with Drive Square (1843)
Number of Flutes
Number of Flutes
  • 0 (3)
  • 2 (245)
  • 3 (1072)
  • 4 (362)
  • 5 (85)
  • 6 (82)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • Oxide (43)
  • TiN (195)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KM6515 (143)
  • KP6525 (315)
  • KSH26 (18)
  • KSMN34 (89)
  • KSN28 (23)
  • KSN38 (16)
  • KSP21 (43)
  • KSP27 (163)
  • KSP32 (83)
  • KSP39 (565)
  • KSS20 (79)
  • KSS29 (128)
  • KSSM24 (51)
  • KSU30 (2)
  • KSU31 (131)
Tap Standard
Tap Standard
  • ANSI (893)
  • DIN 2174 (47)
  • DIN 371 (263)
  • DIN 374 (178)
  • DIN 376 (244)
  • DIN-ANSI (149)
  • JIS (8)
Tap Type
Tap Type
  • 10 (14)
  • 11 (311)
  • 13 (82)
  • 3 (135)
  • 8 (1307)
frontEnd
Thread TPI
Thread TPI
  • 4.5 mm (1)
  • 5.0 mm (1)
  • 6.0 mm (3)
  • 7.0 mm (7)
  • 8.0 mm (10)
  • 9.0 mm (5)
  • 10.0 mm (18)
  • 11.0 mm (34)
  • 11.5 mm (2)
  • 12.0 mm (16)
  • 13.0 mm (51)
  • 14.0 mm (48)
  • 16.0 mm (73)
  • 18.0 mm (101)
  • 19.0 mm (4)
  • 20.0 mm (147)
  • 24.0 mm (151)
  • 27.0 mm (11)
  • 28.0 mm (68)
  • 32.0 mm (170)
  • 36.0 mm (6)
  • 40.0 mm (68)
  • 48.0 mm (7)
  • 56.0 mm (18)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.177 in (1)
  • 0.197 in (1)
  • 0.237 in (3)
  • 0.276 in (7)
  • 0.315 in (10)
  • 0.354 in (5)
  • 0.394 in (18)
  • 0.433 in (34)
  • 0.453 in (2)
  • 0.473 in (16)
  • 0.512 in (51)
  • 0.551 in (48)
  • 0.63 in (73)
  • 0.709 in (101)
  • 0.748 in (4)
  • 0.787 in (147)
  • 0.946 in (151)
  • 1.063 in (11)
  • 1.102 in (68)
  • 1.26 in (170)
  • 1.417 in (6)
  • 1.575 in (68)
  • 1.891 in (7)
  • 2.205 in (18)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.4 mm (7)
  • 0.45 mm (9)
  • 0.5 mm (48)
  • 0.601 mm (6)
  • 0.701 mm (43)
  • 0.75 mm (6)
  • 0.8 mm (54)
  • 1.0 mm (122)
  • 1.25 mm (109)
  • 1.5 mm (169)
  • 1.75 mm (57)
  • 2.0 mm (85)
  • 2.5 mm (35)
  • 3.0 mm (18)
  • 3.5 mm (26)
  • 4.0 mm (15)
  • 4.5 mm (12)
  • 5.0 mm (3)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.016 in (7)
  • 0.019 in (9)
  • 0.02 in (48)
  • 0.024 in (6)
  • 0.028 in (43)
  • 0.03 in (6)
  • 0.031 in (54)
  • 0.039 in (122)
  • 0.049 in (109)
  • 0.06 in (169)
  • 0.069 in (57)
  • 0.079 in (85)
  • 0.098 in (35)
  • 0.119 in (18)
  • 0.138 in (26)
  • 0.157 in (15)
  • 0.177 in (12)
  • 0.197 in (3)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (249)
  • PC (724)
  • PP (42)
  • SB (833)
  • TC (1)
backEnd
Back-End Diameter
Back-End Diameter
  • 2.801 mm (12)
  • 3.5 mm (26)
  • 3.575 mm (163)
  • 4.0 mm (14)
  • 4.275 mm (77)
  • 4.5 mm (40)
  • 4.926 mm (107)
  • 5.0 mm (1)
  • 5.5 mm (1)
  • 5.601 mm (4)
  • 6.0 mm (103)
  • 6.075 mm (1)
  • 6.2 mm (1)
  • 6.476 mm (128)
  • 7.0 mm (63)
  • 7.95 mm (7)
  • 8.0 mm (75)
  • 8.076 mm (135)
  • 8.201 mm (57)
  • 8.5 mm (1)
  • 9.0 mm (87)
  • 9.326 mm (107)
  • 9.675 mm (121)
  • 10.0 mm (56)
  • 10.9 mm (24)
  • 11.0 mm (63)
  • 11.125 mm (4)
  • 12.0 mm (57)
  • 12.201 mm (70)
  • 13.775 mm (3)
  • 14.0 mm (34)
  • 14.3 mm (4)
  • 14.976 mm (28)
  • 16.0 mm (24)
  • 17.475 mm (4)
  • 17.675 mm (1)
  • 17.7 mm (3)
  • 17.776 mm (4)
  • 18.0 mm (40)
  • 20.0 mm (6)
  • 20.326 mm (9)
  • 22.0 mm (24)
  • 22.725 mm (2)
  • 22.75 mm (1)
  • 23.026 mm (3)
  • 25.0 mm (14)
  • 25.925 mm (1)
  • 28.0 mm (19)
  • 28.576 mm (2)
  • 32.0 mm (13)
  • 36.0 mm (3)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.11 in (12)
  • 0.138 in (26)
  • 0.142 in (163)
  • 0.157 in (14)
  • 0.168 in (77)
  • 0.177 in (40)
  • 0.194 in (107)
  • 0.197 in (1)
  • 0.217 in (1)
  • 0.221 in (4)
  • 0.237 in (103)
  • 0.24 in (1)
  • 0.244 in (1)
  • 0.255 in (128)
  • 0.276 in (63)
  • 0.313 in (7)
  • 0.315 in (75)
  • 0.318 in (135)
  • 0.323 in (57)
  • 0.335 in (1)
  • 0.354 in (87)
  • 0.367 in (107)
  • 0.381 in (121)
  • 0.394 in (56)
  • 0.429 in (24)
  • 0.433 in (63)
  • 0.438 in (4)
  • 0.473 in (57)
  • 0.48 in (70)
  • 0.542 in (3)
  • 0.551 in (34)
  • 0.564 in (4)
  • 0.59 in (28)
  • 0.63 in (24)
  • 0.689 in (4)
  • 0.697 in (1)
  • 0.698 in (3)
  • 0.701 in (4)
  • 0.709 in (40)
  • 0.787 in (6)
  • 0.8 in (9)
  • 0.866 in (24)
  • 0.895 in (2)
  • 0.896 in (1)
  • 0.907 in (3)
  • 0.984 in (14)
  • 1.022 in (1)
  • 1.102 in (19)
  • 1.125 in (2)
  • 1.26 in (13)
  • 1.417 in (3)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""