Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Gewindedrehen

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2784)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2747)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2747)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2704)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2590)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1602)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1823)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1586)
  • M Stainless Steel (2700)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2700)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1820)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2530)
  • K Cast Iron (2469)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1716)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2461)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1708)
  • N Non-Ferrous Materials (862)
    • N1
      Wrought Aluminum
      (736)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (757)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (519)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (740)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (500)
    • N6
      Carbon, Graphite Composites, CFRP
      (492)
    • N7
      MMC's
      (449)
  • S High-Temp Alloys (2056)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1723)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1701)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1701)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1628)
  • H Hardened Materials (716)
    • H1
      Hardened Materials 44-48 HRC
      (703)
    • H2
      Hardened Materials 48-55 HRC
      (178)
    • H3
      Hardened Materials 56-60 HRC
      (115)
    • H4
      Hardened Materials >60 HRC
      (115)
Select First Choice
  • BR (30)
  • CN (100)
  • DE (242)
  • GB (116)
  • IN (20)
  • SG (90)
  • US (355)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Countersinking Countersinking (24)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Drilling Drilling (8)
  • Face Grooving Face Grooving (191)
  • Facing Facing (4)
  • Grooving Grooving (134)
  • ID Grooving ID Grooving (69)
  • ID Thread Turning ID Thread Turning (896)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (982)
  • Pipe Thread Pipe Thread (88)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Tapping Blind Hole Tapping Blind Hole (1179)
  • Tapping Through Hole Tapping Through Hole (851)
  • Thread Milling Thread Milling (186)
  • Threading Threading (2354)
  • Turning Turning (4)
Cutting Diameter
Cutting Diameter
  • 0.094 in (1)
  • 0.124 in (2)
  • 0.132 in (1)
  • 0.157 in (1)
  • 0.159 in (1)
  • 0.169 in (1)
  • 0.185 in (1)
  • 0.189 in (3)
  • 0.197 in (1)
  • 0.232 in (1)
  • 0.237 in (2)
  • 0.242 in (1)
  • 0.256 in (2)
  • 0.264 in (1)
  • 0.266 in (1)
  • 0.301 in (1)
  • 0.315 in (2)
  • 0.323 in (2)
  • 0.354 in (5)
  • 0.39 in (3)
  • 0.394 in (4)
  • 0.399 in (1)
  • 0.408 in (1)
  • 0.41 in (1)
  • 0.449 in (1)
  • 0.45 in (2)
  • 0.453 in (3)
  • 0.457 in (2)
  • 0.465 in (1)
  • 0.473 in (2)
  • 0.477 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (3)
  • 0.551 in (4)
  • 0.579 in (1)
  • 0.58 in (1)
  • 0.581 in (1)
  • 0.591 in (2)
  • 0.594 in (1)
  • 0.608 in (2)
  • 0.61 in (3)
  • 0.63 in (4)
  • 0.669 in (5)
  • 0.67 in (2)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.79 in (1)
  • 0.799 in (1)
  • 0.802 in (1)
  • 0.807 in (2)
  • 0.811 in (4)
  • 0.835 in (2)
  • 0.866 in (5)
  • 0.87 in (5)
  • 0.906 in (1)
  • 0.909 in (2)
  • 0.917 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.039 in (2)
  • 1.18 in (3)
  • 1.181 in (13)
  • 1.22 in (4)
  • 1.358 in (1)
  • 1.379 in (1)
  • 1.417 in (4)
  • 1.421 in (2)
  • 1.437 in (1)
  • 1.441 in (2)
  • 1.457 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.539 in (1)
  • 1.651 in (1)
  • 1.655 in (4)
  • 1.69 in (1)
  • 1.732 in (2)
  • 1.811 in (1)
  • 1.891 in (2)
  • 1.929 in (2)
  • 2.047 in (2)
  • 2.09 in (1)
  • 2.091 in (1)
  • 2.205 in (1)
  • 2.283 in (1)
  • 2.319 in (2)
  • 2.48 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.401 mm (1)
  • 3.151 mm (2)
  • 3.35 mm (1)
  • 4.0 mm (1)
  • 4.05 mm (1)
  • 4.3 mm (1)
  • 4.7 mm (1)
  • 4.801 mm (3)
  • 5.0 mm (1)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 6.15 mm (1)
  • 6.5 mm (2)
  • 6.7 mm (1)
  • 6.75 mm (1)
  • 7.65 mm (1)
  • 8.0 mm (2)
  • 8.201 mm (2)
  • 9.0 mm (5)
  • 9.9 mm (3)
  • 10.0 mm (4)
  • 10.125 mm (1)
  • 10.351 mm (1)
  • 10.4 mm (1)
  • 11.4 mm (1)
  • 11.425 mm (2)
  • 11.5 mm (3)
  • 11.601 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (2)
  • 12.101 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (3)
  • 14.0 mm (4)
  • 14.701 mm (1)
  • 14.726 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (2)
  • 15.101 mm (1)
  • 15.451 mm (2)
  • 15.5 mm (3)
  • 16.0 mm (4)
  • 17.0 mm (5)
  • 17.026 mm (2)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 20.076 mm (1)
  • 20.3 mm (1)
  • 20.375 mm (1)
  • 20.5 mm (2)
  • 20.6 mm (4)
  • 21.201 mm (2)
  • 22.0 mm (5)
  • 22.1 mm (5)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.401 mm (2)
  • 29.975 mm (3)
  • 30.0 mm (13)
  • 31.0 mm (4)
  • 34.5 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 36.1 mm (2)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 37.0 mm (2)
  • 37.075 mm (1)
  • 37.551 mm (1)
  • 39.1 mm (1)
  • 41.901 mm (1)
  • 42.0 mm (4)
  • 42.926 mm (1)
  • 44.0 mm (2)
  • 46.0 mm (1)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 52.0 mm (2)
  • 53.075 mm (1)
  • 53.1 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 58.901 mm (2)
  • 63.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.026 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 36.1 mm (1)
  • 39.075 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.866 in (1)
  • 0.87 in (1)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.421 in (1)
  • 1.538 in (1)
  • 1.772 in (1)
  • 1.929 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 6.0 mm (7)
  • 6.25 mm (1)
  • 7.0 mm (30)
  • 7.9 mm (25)
  • 8.0 mm (40)
  • 8.1 mm (10)
  • 8.201 mm (1)
  • 8.25 mm (1)
  • 8.725 mm (1)
  • 9.0 mm (16)
  • 9.1 mm (27)
  • 9.5 mm (1)
  • 9.701 mm (47)
  • 9.9 mm (8)
  • 10.0 mm (119)
  • 10.101 mm (1)
  • 10.25 mm (1)
  • 10.4 mm (4)
  • 10.5 mm (2)
  • 10.775 mm (1)
  • 10.8 mm (1)
  • 10.9 mm (2)
  • 10.925 mm (4)
  • 11.0 mm (19)
  • 11.101 mm (54)
  • 11.201 mm (11)
  • 11.5 mm (2)
  • 11.601 mm (11)
  • 11.701 mm (1)
  • 11.8 mm (11)
  • 11.9 mm (3)
  • 12.0 mm (77)
  • 12.101 mm (14)
  • 12.201 mm (6)
  • 12.351 mm (2)
  • 12.4 mm (48)
  • 12.5 mm (3)
  • 12.701 mm (47)
  • 13.0 mm (100)
  • 13.101 mm (3)
  • 13.201 mm (5)
  • 13.4 mm (16)
  • 14.0 mm (21)
  • 14.201 mm (25)
  • 14.8 mm (10)
  • 14.9 mm (3)
  • 15.0 mm (193)
  • 15.101 mm (42)
  • 15.201 mm (8)
  • 15.8 mm (2)
  • 16.0 mm (105)
  • 16.45 mm (1)
  • 16.825 mm (2)
  • 17.0 mm (10)
  • 17.3 mm (3)
  • 17.475 mm (3)
  • 17.5 mm (42)
  • 18.0 mm (106)
  • 18.7 mm (3)
  • 18.901 mm (2)
  • 19.0 mm (15)
  • 19.05 mm (9)
  • 19.1 mm (34)
  • 19.6 mm (44)
  • 20.0 mm (75)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 21.0 mm (34)
  • 21.1 mm (4)
  • 22.0 mm (23)
  • 22.1 mm (1)
  • 22.3 mm (8)
  • 22.401 mm (14)
  • 23.0 mm (10)
  • 23.1 mm (21)
  • 23.875 mm (1)
  • 23.901 mm (40)
  • 24.0 mm (38)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (39)
  • 25.35 mm (1)
  • 25.401 mm (29)
  • 26.0 mm (1)
  • 26.201 mm (8)
  • 26.925 mm (5)
  • 27.0 mm (8)
  • 27.701 mm (41)
  • 28.0 mm (3)
  • 29.0 mm (1)
  • 29.151 mm (1)
  • 30.0 mm (31)
  • 31.0 mm (14)
  • 31.8 mm (3)
  • 32.0 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.926 mm (7)
  • 35.0 mm (27)
  • 36.0 mm (4)
  • 36.7 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 38.5 mm (2)
  • 38.676 mm (1)
  • 40.0 mm (18)
  • 41.151 mm (2)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 45.0 mm (10)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (4)
  • 0.237 in (7)
  • 0.246 in (1)
  • 0.276 in (30)
  • 0.311 in (25)
  • 0.315 in (40)
  • 0.319 in (10)
  • 0.323 in (1)
  • 0.325 in (1)
  • 0.345 in (1)
  • 0.354 in (16)
  • 0.358 in (27)
  • 0.374 in (1)
  • 0.382 in (47)
  • 0.39 in (8)
  • 0.394 in (119)
  • 0.398 in (1)
  • 0.404 in (1)
  • 0.41 in (4)
  • 0.414 in (2)
  • 0.424 in (1)
  • 0.425 in (1)
  • 0.429 in (2)
  • 0.43 in (4)
  • 0.433 in (19)
  • 0.437 in (54)
  • 0.441 in (11)
  • 0.453 in (2)
  • 0.457 in (11)
  • 0.461 in (1)
  • 0.465 in (11)
  • 0.47 in (3)
  • 0.473 in (77)
  • 0.477 in (14)
  • 0.48 in (6)
  • 0.486 in (2)
  • 0.488 in (48)
  • 0.492 in (3)
  • 0.5 in (47)
  • 0.512 in (100)
  • 0.516 in (3)
  • 0.52 in (5)
  • 0.528 in (16)
  • 0.551 in (21)
  • 0.559 in (25)
  • 0.583 in (10)
  • 0.587 in (3)
  • 0.591 in (193)
  • 0.594 in (42)
  • 0.598 in (8)
  • 0.622 in (2)
  • 0.63 in (105)
  • 0.648 in (1)
  • 0.662 in (2)
  • 0.669 in (10)
  • 0.681 in (3)
  • 0.689 in (3)
  • 0.69 in (42)
  • 0.709 in (106)
  • 0.736 in (3)
  • 0.744 in (2)
  • 0.748 in (15)
  • 0.75 in (9)
  • 0.752 in (34)
  • 0.772 in (44)
  • 0.787 in (75)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.828 in (34)
  • 0.832 in (4)
  • 0.866 in (23)
  • 0.87 in (1)
  • 0.878 in (8)
  • 0.882 in (14)
  • 0.906 in (10)
  • 0.909 in (21)
  • 0.941 in (1)
  • 0.942 in (40)
  • 0.946 in (38)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.984 in (39)
  • 0.998 in (1)
  • 1.0 in (29)
  • 1.024 in (1)
  • 1.031 in (8)
  • 1.06 in (5)
  • 1.063 in (8)
  • 1.091 in (41)
  • 1.102 in (3)
  • 1.143 in (1)
  • 1.149 in (1)
  • 1.181 in (31)
  • 1.22 in (14)
  • 1.252 in (3)
  • 1.26 in (1)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.299 in (1)
  • 1.339 in (5)
  • 1.375 in (7)
  • 1.379 in (27)
  • 1.417 in (4)
  • 1.445 in (1)
  • 1.496 in (1)
  • 1.5 in (6)
  • 1.516 in (2)
  • 1.524 in (1)
  • 1.575 in (18)
  • 1.62 in (2)
  • 1.655 in (4)
  • 1.713 in (4)
  • 1.75 in (2)
  • 1.772 in (10)
  • 1.891 in (2)
  • 1.969 in (4)
  • 2.165 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 0 (149)
  • 55 (125)
  • 60 (311)
  • ACME (316)
  • API (163)
  • API BUTTRESS (38)
  • API RD (162)
  • BSPT (113)
  • BSW (330)
  • BUTTRESS (208)
  • G Internal Thread Parallel (15)
  • M (507)
  • M-Metric/ISO (925)
  • MF (16)
  • NC/UNC (7)
  • NPS (15)
  • NPT (231)
  • NPTF (127)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (12)
  • RD DIN 405 (116)
  • STUB ACME (226)
  • TR DIN 103 (120)
  • UN (664)
  • UNC (590)
  • UNF (395)
  • UNJ (288)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (197)
  • Lightly Interrupted Cut (197)
  • Smooth Cut (197)
  • Varying Depth of Cut (197)
Thread Size
Thread Size
  • 1 - 11 (2)
  • 1 - 11 1/2 (2)
  • 1 - 12 (3)
  • 1 - 8 (10)
  • 1 1/2 - 12 (1)
  • 1 1/2 - 6 (2)
  • 1 1/4 - 12 (1)
  • 1 1/4 - 7 (3)
  • 1 1/8 - 12 (2)
  • 1 1/8 - 7 (4)
  • 1 3/4 - 5 (1)
  • 1 3/8 - 12 (1)
  • 1 3/8 - 6 (1)
  • 1/16 - 27 (3)
  • 1/2 - 13 (55)
  • 1/2 - 14 (6)
  • 1/2 - 20 (40)
  • 1/2-13 (1)
  • 1/4 - 18 (4)
  • 1/4 - 19 (2)
  • 1/4 - 20 (67)
  • 1/4 - 28 (64)
  • 1/4-20 (1)
  • 1/8 - 27 (8)
  • 1/8 - 28 (3)
  • 10 - 24 (41)
  • 10 - 32 (61)
  • 12 - 24 (3)
  • 12 - 28 (3)
  • 2 - 4 1/2 (1)
  • 2 - 56 (18)
  • 3 - 48 (2)
  • 3/4 - 10 (18)
  • 3/4 - 14 (5)
  • 3/4 - 16 (15)
  • 3/8 - 16 (62)
  • 3/8 - 18 (4)
  • 3/8 - 19 (2)
  • 3/8 - 24 (52)
  • 3/8-16 (1)
  • 4 - 40 (47)
  • 4 - 48 (5)
  • 5 - 40 (7)
  • 5/16 - 18 (62)
  • 5/16 - 24 (53)
  • 5/16- 24 (4)
  • 5/16-18 (1)
  • 5/8 - 11 (33)
  • 5/8 - 14 (1)
  • 5/8 - 18 (24)
  • 5/8-11 (1)
  • 6 - 32 (54)
  • 6 - 40 (14)
  • 7/16 - 14 (35)
  • 7/16 - 20 (44)
  • 7/16-14 (1)
  • 7/8 - 14 (4)
  • 7/8 - 9 (5)
  • 8 - 32 (59)
  • 8 - 36 (6)
  • 9/16 - 12 (8)
  • 9/16 - 18 (10)
  • 9/16-12 (1)
  • M10 X 0,75 (2)
  • M10 X 1 (23)
  • M10 X 1,25 (26)
  • M10 X 1,5 (72)
  • M10 X 1,50 (3)
  • M10 X 1.0 (1)
  • M10 X 1.5 (1)
  • M10X1.5 (2)
  • M12 X 1 (3)
  • M12 X 1,25 (17)
  • M12 X 1,5 (33)
  • M12 X 1,75 (67)
  • M12 X 1.0 (1)
  • M12 X 1.5 (1)
  • M12 X 1.75 (1)
  • M12X1.25 (1)
  • M12X1.75 (2)
  • M14 X 1 (3)
  • M14 X 1,25 (7)
  • M14 X 1,5 (32)
  • M14 X 1.5 (1)
  • M14 X 2 (37)
  • M14 X 2,0 (1)
  • M14 X 2.0 (1)
  • M14X1.5 (1)
  • M14X2 (1)
  • M16 X 1 (1)
  • M16 X 1,5 (31)
  • M16 X 1.5 (1)
  • M16 X 2 (40)
  • M16 X 2,0 (3)
  • M16 X 2.0 (1)
  • M16X2 (2)
  • M18 X 1,5 (14)
  • M18 X 1.5 (1)
  • M18 X 2 (4)
  • M18 X 2,5 (16)
  • M18 X 2.5 (1)
  • M2 X 0,4 (7)
  • M2,5 X 0,45 (10)
  • M20 X 1,5 (3)
  • M20 X 1.5 (1)
  • M20 X 2 (3)
  • M20 X 2,5 (16)
  • M20 X 2.5 (1)
  • M22 X 1,5 (3)
  • M22 X 2 (3)
  • M22 X 2,5 (5)
  • M24 X 1,5 (3)
  • M24 X 2 (2)
  • M24 X 3 (15)
  • M27 X 1,5 (1)
  • M27 X 3 (3)
  • M3 X 0,5 (44)
  • M3 X 0.5 (1)
  • M3,5 X 0,6 (6)
  • M30 X 1,5 (2)
  • M30 X 2 (1)
  • M30 X 3,5 (14)
  • M33 X 3,5 (13)
  • M36 X 4 (14)
  • M39 X 4 (1)
  • M4 X 0,5 (1)
  • M4 X 0,7 (46)
  • M4 X 0.5 (1)
  • M4 X 0.7 (1)
  • M42 X 4,5 (12)
  • M45 X 5 (1)
  • M48 X 5 (1)
  • M4X0.7 (1)
  • M5 X 0,5 (1)
  • M5 X 0,8 (61)
  • M5 X 0.5 (1)