successfully added to cart
View Cart

Kombinations-Bohrwerkzeuge

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (153)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (153)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (153)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (153)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (153)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (153)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (153)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (139)
  • M Stainless Steel (33)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (33)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (33)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (33)
  • K Cast Iron (156)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (156)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (156)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (156)
  • N Non-Ferrous Materials (36)
    • N1
      Wrought Aluminum
      (36)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (36)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (36)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (36)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (36)
    • N6
      Carbon, Graphite Composites, CFRP
      (36)
    • N7
      MMC's
      (36)
  • S High-Temp Alloys (33)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (33)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (33)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (33)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (33)
  • H Hardened Materials (30)
    • H1
      Hardened Materials 44-48 HRC
      (30)
    • H2
      Hardened Materials 48-55 HRC
      (30)
    • H3
      Hardened Materials 56-60 HRC
      (30)
    • H4
      Hardened Materials >60 HRC
      (30)
  • C CFRP Materials (17)
    • C1
      CFRP, CFRP / CFRP
      (7)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (12)
    • C3
      CFRP / Titanium CFRP / High Temp
      (10)
    • C4
      CFRP / Stainless Steel
      (10)
Select First Choice
  • IN (3)
Applications
  • Convex Drilling Convex Drilling (216)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (216)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (216)
  • Counterboring Counterboring (216)
  • Countersinking Countersinking (256)
  • Drilling Drilling (273)
  • Flat Bottom Drilling Flat Bottom Drilling (252)
  • Inclined Entry Drilling Inclined Entry Drilling (216)
  • Inclined Exit Drilling Inclined Exit Drilling (216)
  • Pre-Condition Pre-Condition (258)
  • Stacked Plates Drilling Stacked Plates Drilling (236)
  • X-Offset Drilling X-Offset Drilling (216)
Cutting Diameter
  • 3.175 (2)
  • 3.4 (3)
  • 3.5 (1)
  • 3.797 (1)
  • 3.8 (1)
  • 3.96 (1)
  • 3.97 (1)
  • 4.0 (4)
  • 4.1 (3)
  • 4.2 (1)
  • 4.3 (1)
  • 4.5 (1)
  • 4.6 (3)
  • 4.623 (2)
  • 4.763 (1)
  • 4.775 (1)
  • 4.828 (5)
  • 4.9 (1)
  • 5.0 (1)
  • 5.1 (3)
  • 5.2 (1)
  • 5.3 (1)
  • 5.4 (1)
  • 5.41 (2)
  • 5.5 (1)
  • 5.55 (3)
  • 5.558 (5)
  • 5.6 (1)
  • 5.8 (1)
  • 6.0 (4)
  • 6.1 (3)
  • 6.2 (1)
  • 6.3 (1)
  • 6.35 (8)
  • 6.4 (1)
  • 6.5 (1)
  • 6.528 (1)
  • 6.6 (1)
  • 6.7 (1)
  • 6.746 (1)
  • 6.8 (1)
  • 6.9 (1)
  • 6.909 (1)
  • 7.0 (1)
  • 7.145 (2)
  • 7.3 (3)
  • 7.4 (1)
  • 7.5 (1)
  • 7.541 (1)
  • 7.8 (1)
  • 7.9 (1)
  • 7.938 (5)
  • 7.95 (1)
  • 8.0 (4)
  • 8.1 (4)
  • 8.2 (1)
  • 8.3 (1)
  • 8.334 (2)
  • 8.4 (1)
  • 8.433 (1)
  • 8.5 (1)
  • 8.6 (1)
  • 8.7 (1)
  • 8.733 (1)
  • 8.8 (1)
  • 8.9 (1)
  • 9.0 (1)
  • 9.1 (3)
  • 9.129 (2)
  • 9.347 (1)
  • 9.4 (1)
  • 9.5 (1)
  • 9.525 (7)
  • 9.6 (1)
  • 9.7 (1)
  • 9.8 (1)
  • 9.921 (1)
  • 10.0 (4)
  • 10.1 (3)
  • 10.2 (1)
  • 10.3 (1)
  • 10.319 (1)
  • 10.32 (1)
  • 10.4 (1)
  • 10.5 (1)
  • 10.6 (1)
  • 10.7 (1)
  • 10.71 (1)
  • 10.8 (1)
  • 11.0 (1)
  • 11.1 (3)
  • 11.11 (1)
  • 11.112 (1)
  • 11.125 (1)
  • 11.2 (1)
  • 11.3 (1)
  • 11.5 (1)
  • 11.508 (1)
  • 11.7 (1)
  • 11.8 (1)
  • 11.9 (1)
  • 12.0 (4)
  • 12.2 (3)
  • 12.3 (1)
  • 12.304 (1)
  • 12.5 (1)
  • 12.7 (2)
  • 12.8 (1)
  • 13.0 (1)
  • 13.096 (1)
  • 13.097 (1)
  • 13.1 (3)
  • 13.2 (1)
  • 13.5 (1)
  • 14.0 (4)
  • 14.1 (3)
  • 14.2 (1)
  • 14.28 (1)
  • 14.288 (1)
  • 14.3 (1)
  • 15.0 (1)
  • 15.5 (3)
  • 15.87 (1)
  • 15.875 (2)
  • 16.0 (4)
  • 16.5 (3)
  • 16.667 (1)
  • 16.669 (1)
  • 17.0 (1)
  • 17.46 (1)
  • 17.463 (1)
  • 17.475 (1)
  • 17.5 (3)
  • 17.7 (1)
  • 18.0 (3)
  • 19.05 (2)
  • 20.65 (1)
  • 22.225 (1)
  • 23.825 (1)
to
Cutting Diameter
  • 0.125 (2)
  • 0.1339 (1)
  • 0.134 (2)
  • 0.1378 (1)
  • 0.1495 (1)
  • 0.1496 (1)
  • 0.156 (1)
  • 0.1563 (1)
  • 0.157 (3)
  • 0.1575 (1)
  • 0.161 (2)
  • 0.1614 (1)
  • 0.1654 (1)
  • 0.1693 (1)
  • 0.1772 (1)
  • 0.181 (2)
  • 0.1811 (1)
  • 0.182 (2)
  • 0.1875 (1)
  • 0.188 (1)
  • 0.1901 (5)
  • 0.1929 (1)
  • 0.1969 (1)
  • 0.2008 (1)
  • 0.201 (2)
  • 0.2047 (1)
  • 0.2087 (1)
  • 0.2126 (1)
  • 0.213 (2)
  • 0.2165 (1)
  • 0.218 (2)
  • 0.2185 (1)
  • 0.2187 (1)
  • 0.2188 (4)
  • 0.2205 (1)
  • 0.2283 (1)
  • 0.236 (3)
  • 0.2362 (1)
  • 0.24 (2)
  • 0.2402 (1)
  • 0.2441 (1)
  • 0.248 (1)
  • 0.25 (8)
  • 0.252 (1)
  • 0.2559 (1)
  • 0.257 (1)
  • 0.2598 (1)
  • 0.2638 (1)
  • 0.2656 (1)
  • 0.2677 (1)
  • 0.2717 (1)
  • 0.272 (1)
  • 0.2756 (1)
  • 0.2813 (2)
  • 0.287 (2)
  • 0.2874 (1)
  • 0.2913 (1)
  • 0.2953 (1)
  • 0.2969 (1)
  • 0.3071 (1)
  • 0.311 (1)
  • 0.3125 (5)
  • 0.313 (1)
  • 0.315 (4)
  • 0.3189 (1)
  • 0.319 (3)
  • 0.3228 (1)
  • 0.3268 (1)
  • 0.3281 (2)
  • 0.3307 (1)
  • 0.332 (1)
  • 0.3346 (1)
  • 0.3386 (1)
  • 0.3425 (1)
  • 0.3438 (1)
  • 0.3465 (1)
  • 0.3504 (1)
  • 0.3543 (1)
  • 0.358 (2)
  • 0.3583 (1)
  • 0.3594 (2)
  • 0.368 (1)
  • 0.3701 (1)
  • 0.374 (1)
  • 0.375 (7)
  • 0.378 (1)
  • 0.3819 (1)
  • 0.3858 (1)
  • 0.3906 (1)
  • 0.3937 (1)
  • 0.394 (3)
  • 0.3976 (1)
  • 0.398 (2)
  • 0.4016 (1)
  • 0.4055 (1)
  • 0.4063 (2)
  • 0.4094 (1)
  • 0.4134 (1)
  • 0.4173 (1)
  • 0.4213 (1)
  • 0.4219 (1)
  • 0.4252 (1)
  • 0.4331 (1)
  • 0.437 (3)
  • 0.4375 (2)
  • 0.438 (1)
  • 0.4409 (1)
  • 0.4449 (1)
  • 0.4528 (1)
  • 0.4531 (1)
  • 0.4606 (1)
  • 0.4646 (1)
  • 0.4685 (1)
  • 0.472 (3)
  • 0.4724 (1)
  • 0.48 (2)
  • 0.4803 (1)
  • 0.4843 (1)
  • 0.4844 (1)
  • 0.4921 (1)
  • 0.5 (2)
  • 0.5039 (1)
  • 0.5118 (1)
  • 0.5156 (2)
  • 0.5157 (1)
  • 0.516 (2)
  • 0.5197 (1)
  • 0.5315 (1)
  • 0.551 (3)
  • 0.5512 (1)
  • 0.555 (2)
  • 0.5551 (1)
  • 0.5591 (1)
  • 0.5625 (2)
  • 0.563 (1)
  • 0.5906 (1)
  • 0.61 (2)
  • 0.6102 (1)
  • 0.625 (3)
  • 0.6299 (1)
  • 0.63 (3)
  • 0.6496 (1)
  • 0.65 (2)
  • 0.6562 (1)
  • 0.6563 (1)
  • 0.6693 (1)
  • 0.6875 (2)
  • 0.688 (1)
  • 0.689 (3)
  • 0.6969 (1)
  • 0.7087 (1)
  • 0.709 (2)
  • 0.75 (2)
  • 0.813 (1)
  • 0.875 (1)
  • 0.938 (1)
to
Reach
  • 16.6 (1)
  • 18.2 (1)
  • 18.9 (1)
  • 20.9 (2)
  • 22.0 (1)
  • 22.3 (1)
  • 22.7 (1)
  • 23.3 (1)
  • 23.9 (1)
  • 25.0 (1)
  • 25.5 (1)
  • 25.6 (1)
  • 26.5 (1)
  • 27.2 (1)
  • 27.7 (1)
  • 28.0 (1)
  • 28.5 (1)
  • 29.0 (1)
  • 29.5 (2)
  • 30.0 (1)
  • 30.2 (1)
  • 30.3 (1)
  • 30.5 (1)
  • 31.5 (1)
  • 32.4 (1)
  • 32.6 (1)
  • 33.0 (10)
  • 33.1 (1)
  • 33.5 (1)
  • 33.7 (1)
  • 34.0 (1)
  • 34.4 (1)
  • 34.5 (1)
  • 34.9 (1)
  • 35.3 (1)
  • 35.5 (1)
  • 35.7 (1)
  • 36.2 (2)
  • 36.5 (1)
  • 36.9 (1)
  • 37.5 (1)
  • 37.9 (1)
  • 38.0 (10)
  • 38.4 (1)
  • 38.5 (1)
  • 39.6 (1)
  • 40.0 (1)
  • 40.1 (1)
  • 40.4 (1)
  • 40.6 (1)
  • 40.8 (3)
  • 41.2 (1)
  • 41.4 (1)
  • 41.6 (1)
  • 41.8 (1)
  • 42.0 (1)
  • 42.4 (1)
  • 42.8 (1)
  • 42.9 (1)
  • 43.0 (1)
  • 43.1 (1)
  • 43.5 (1)
  • 43.9 (1)
  • 44.0 (1)
  • 44.1 (1)
  • 44.9 (1)
  • 45.1 (3)
  • 45.5 (2)
  • 45.7 (1)
  • 46.1 (1)
  • 46.5 (1)
  • 46.9 (1)
  • 47.2 (1)
  • 47.3 (2)
  • 47.7 (1)
  • 48.0 (1)
  • 48.1 (1)
  • 48.4 (1)
  • 48.6 (1)
  • 49.0 (1)
  • 49.3 (2)
  • 49.4 (2)
  • 49.7 (1)
  • 50.3 (1)
  • 50.5 (2)
  • 50.8 (1)
  • 51.2 (1)
  • 51.5 (1)
  • 51.7 (2)
  • 52.4 (1)
  • 52.7 (1)
  • 53.1 (1)
  • 53.3 (1)
  • 53.6 (2)
  • 53.7 (1)
  • 54.102 (1)
  • 54.6 (1)
  • 55.4 (1)
  • 55.6 (1)
  • 55.7 (1)
  • 56.2 (1)
  • 56.4 (2)
  • 56.7 (1)
  • 57.6 (1)
  • 57.8 (2)
  • 59.0 (1)
  • 59.1 (1)
  • 59.4 (1)
  • 59.7 (1)
  • 59.9 (1)
  • 61.7 (1)
  • 62.0 (2)
  • 63.0 (1)
  • 63.331 (1)
  • 64.0 (1)
  • 64.1 (1)
  • 64.4 (1)
  • 65.6 (1)
  • 66.1 (1)
  • 66.2 (2)
  • 66.503 (1)
  • 66.9 (1)
  • 68.0 (1)
  • 68.2 (2)
  • 68.7 (1)
  • 69.5 (1)
  • 72.4 (2)
  • 76.5 (2)
  • 79.43 (1)
to
Reach
  • 0.6535 (1)
  • 0.7165 (1)
  • 0.74 (1)
  • 0.82 (1)
  • 0.8228 (1)
  • 0.87 (1)
  • 0.88 (1)
  • 0.89 (1)
  • 0.92 (1)
  • 0.94 (1)
  • 0.98 (1)
  • 1.0 (1)
  • 1.01 (1)
  • 1.0433 (1)
  • 1.0709 (1)
  • 1.09 (1)
  • 1.1 (1)
  • 1.12 (1)
  • 1.14 (1)
  • 1.16 (2)
  • 1.1811 (1)
  • 1.19 (2)
  • 1.2008 (1)
  • 1.24 (1)
  • 1.28 (2)
  • 1.2992 (10)
  • 1.3 (1)
  • 1.32 (1)
  • 1.33 (1)
  • 1.34 (1)
  • 1.35 (1)
  • 1.3583 (1)
  • 1.37 (1)
  • 1.39 (1)
  • 1.4 (1)
  • 1.41 (1)
  • 1.43 (2)
  • 1.44 (1)
  • 1.45 (1)
  • 1.4786 (2)
  • 1.4797 (1)
  • 1.48 (1)
  • 1.49 (1)
  • 1.4961 (5)
  • 1.4972 (1)
  • 1.51 (1)
  • 1.5156 (1)
  • 1.52 (1)
  • 1.56 (1)
  • 1.57 (1)
  • 1.58 (1)
  • 1.59 (1)
  • 1.6 (1)
  • 1.6063 (3)
  • 1.62 (1)
  • 1.63 (1)
  • 1.64 (1)
  • 1.65 (2)
  • 1.67 (1)
  • 1.69 (2)
  • 1.6929 (1)
  • 1.7 (1)
  • 1.71 (1)
  • 1.73 (2)
  • 1.74 (1)
  • 1.77 (1)
  • 1.7756 (2)
  • 1.78 (1)
  • 1.7913 (2)
  • 1.7992 (1)
  • 1.815 (1)
  • 1.8307 (1)
  • 1.8465 (1)
  • 1.8583 (1)
  • 1.86 (1)
  • 1.8622 (1)
  • 1.878 (1)
  • 1.8898 (1)
  • 1.8937 (1)
  • 1.9055 (1)
  • 1.9134 (1)
  • 1.9291 (1)
  • 1.9409 (2)
  • 1.9449 (2)
  • 1.9567 (1)
  • 1.9803 (1)
  • 1.9882 (2)
  • 2.0 (1)
  • 2.0157 (1)
  • 2.0276 (1)
  • 2.0354 (2)
  • 2.063 (1)
  • 2.0748 (1)
  • 2.0906 (1)
  • 2.0984 (1)
  • 2.1102 (2)
  • 2.1142 (1)
  • 2.13 (1)
  • 2.1496 (1)
  • 2.1811 (1)
  • 2.189 (1)
  • 2.1929 (1)
  • 2.2126 (1)
  • 2.2205 (2)
  • 2.2323 (1)
  • 2.2677 (1)
  • 2.2756 (2)
  • 2.3228 (1)
  • 2.3268 (1)
  • 2.3386 (1)
  • 2.3504 (1)
  • 2.3583 (1)
  • 2.4291 (1)
  • 2.4409 (2)
  • 2.4803 (1)
  • 2.4933 (1)
  • 2.5197 (1)
  • 2.5236 (1)
  • 2.5354 (1)
  • 2.5827 (1)
  • 2.6024 (1)
  • 2.6063 (2)
  • 2.6182 (1)
  • 2.6339 (1)
  • 2.6772 (1)
  • 2.685 (2)
  • 2.7047 (1)
  • 2.7362 (1)
  • 2.8504 (2)
  • 3.0118 (2)
  • 3.127 (1)
to
Cutting Edges Per Insert
  • 0.0 (18)
  • 1.0 (31)
to
Internal Coolant Capability
application
Coating
  • TiAlN (1)
  • TiN (119)
  • Uncoated (20)
Grade Of Cutting Tool
  • CD3 (2)
  • CS5 (14)
  • KC7015 (2)
  • KC7215 (4)
  • KC7315 (130)
  • KCC05 (10)
  • KD1425 (2)
  • KDC05 (5)
  • KDC15 (5)
  • KM1 (3)
  • KMF (10)
  • P30 (2)
Hand Of Tool
  • R (277)
Wiper Insert
  • N (49)
Drill Type
  • 81-01 (140)
  • 86-01 (46)
  • 86-04 (37)
  • 86-09 (54)
Countersunk Angle
  • 30.0 (4)
  • 40.0 (2)
  • 41.0 (10)
  • 45.0 (23)
  • 50.0 (3)
to
frontEnd
Adapter Front-End
  • HYDRAULIC CHUCK (32)
  • HYDRAULIC CHUCK-SLIM LINE (10)
Insert Shape
  • COUNTERBORE/COUNTERSINK MISC (49)
Front End Type
  • ZYL - Cylindrical Adapter (42)
Cutting Width
  • 5.8 (2)
  • 6.1 (1)
  • 9.8 (2)
to
Cutting Width
  • 0.2283 (2)
  • 0.2402 (1)
  • 0.3858 (2)
to
Front End Style
  • ZYL01 Straight Shank (42)
Point Angle
  • 90.0 (5)
  • 120.0 (5)
  • 128.0 (10)
  • 135.0 (120)
to
Gage Length
  • 70.0000 (2)
  • 75.0000 (5)
  • 77.0000 (2)