No Items in Cart
Sign In
Loading Profile
English
COVID-19: How Kennametal is responding

New: KCFM™ 45 Face Mill

KCFM 45 provides high precision pocket seats with a run-out of two microns, exceeding highest surface requirements.
The super-positive geometries of semi-finishing and wiper inserts provide low cutting forces to manage vibrations, especially on thin-walled cast iron components, covering dry and wet machining conditions.

Ceramic and PcBN grades available. Allowing for higher speeds and thus higher productivity. Leading to lower cost per part.

Cutter body features fixed and adjustable insert pockets, providing two options:

  1. Load all pockets with semi finishing inserts when surface requirements are lower. For the adjustable pockets, cartridges for semi finishing inserts are available.
  2. For highest surface requirements, load adjustable pockets with wiper inserts by using the wiper insert cartridge.
 
Fixed pockets for semi-finishing inserts.
 
Adjustable pockets for cartridges with wiper inserts, and for cartridges with semi-finishing inserts.
 
Pocket seat numbering system, reducing setup time.
 
 
Carbide inserts - Ideal for machines with lower spindle capabilities.
 
 
Ceramic inserts - For highest productivity, ideal for semi-finishing.
 
 
PcBN inserts - For highest productivity, ideal for fine-finishing.

Semi-Finishing Insert
HDHN43

 
PcBN (KBK50)
 
Ceramic (KY3500)
 
Carbide (KC514M)

Wiper Insert
SDHN43

 
PcBN (KBK50)
 
PcBN (KBK50)

Carbide (KC514M)

Dry (D)/Wet (W)
Machining

 
D
 
 
D



D/W

Browse KCFM™ 45 Products

Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5)
Applications
  • Chamfer Milling (11)
  • Concave Radius Milling (11)
  • Drilling (11)
  • Face Milling (11)
  • Flat Bottom Drilling (11)
  • Pipe Thread (11)
  • Pocket (11)
  • Pocket Helical (11)
  • Pocket Milling (11)
  • Pocket Plunge Milling (11)
  • Profile Milling (11)
  • Ramping (11)
  • Shoulder Ball Nose (11)
  • Shoulder Bottom Shoulder (11)
  • Shoulder Milling (11)
  • Shoulder Roughing (11)
  • Shoulder Square End (11)
  • Slot Ball Nose (11)
  • Slot Milling (11)
  • Slot Side (11)
  • Slot Square End (11)
  • Slot T (11)
  • Thread Milling (11)
  • Threading (11)
  • ID Thread Turning (5)
Cutting Diameter
to
Cutting Diameter
to
Maximum Cutting Diameter
to
Maximum Cutting Diameter
to
Cutting Length
to
Cutting Length
to
Tool Cutting Edge Angle
to
Connection Style
  • C-Bolt Circle (6)
  • A-Socket Head Cap Screw (5)
Number of Flutes
  • 8 (3)
  • 10 (2)
  • 12 (2)
  • 16 (2)
  • 24 (2)
Cutting Edges Per Insert
to
Internal Coolant Capability
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Grade Of Cutting Tool
  • KBK50 (2)
  • KC514M (2)
  • KY3500 (1)
Hand Of Tool
  • R (11)
Wiper Insert
  • N (3)
  • Y (2)
Front-End
Insert Shape
  • H-HEXAGON 120 (3)
  • S-SQUARE 90 (2)
Center Cutting
Insert Geometry
Shape
  • H-HEXAGON 120 (3)
  • S-SQUARE 90 (2)
Insert IC Size
to
Insert IC Size
to
Cutting Edge Length
to
Cutting Edge Length
to
Cutting Tool Material
  • B H (2)
  • H W (2)
  • C N (1)
Tolerance Class
  • H (5)
Back-End
Connection Type
  • SHELL MILL (11)
Back-End Diameter
to
Back-End Diameter
to
other
Grade
  • KBK50 (2)
  • KC514M (2)
  • KY3500 (1)
Platform
  • KCFM (16)
Tool Unit
  • M (16)
  • I (5)
Insert Hand
  • R (3)
  • N (2)
Number of Inserts
to
Over All Length [L]
to
Over All Length [L]
to
No filters matching ""
View Products in
Metric
Inch
Face Milling

KCFM™ 45 • Semi-Finishing Inserts • IC12 ER
(1 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
6210838 HDHN070408ER HDHN432ER KC514M 12.7000 .5000 4.7600 .1870 5.2000 .2050 0.8000 .0320 0.0800 .0030 6
Face Milling

KCFM™ 45 • Semi-Finishing Inserts • IC12 SR
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
6210796 HDHN070408SR HDHN432SR KBK50 12.7000 .5000 4.7600 .1870 5.2000 .2050 0.8000 .0320 0.0900 .0040 6
6210840 HDHN070408SR HDHN432SR KY3500 12.7000 .5000 4.7600 .1870 5.2000 .2050 0.8000 .0320 0.0900 .0040 6
Face Milling

KCFM 45 • Shell Mill Cutter • Fine Finishing
(5 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Number of Adjustable Inserts Weight Kilograms Max RPM
6224238 KCFM080R08HD07W2 KCFM080R08HD07W2 80.0000 3.150 89.5300 3.525 27.0 1.064     81.4000 3.205 49.9700 1.967 1.0900 .0430 8 2 1.67 9600
6224240 KCFM125R10HD07W2 KCFM125R10HD07W2 125.0000 4.921 134.5300 5.297 40.0 1.575     89.0000 3.504 62.9700 2.479 1.0900 .0430 10 2 4.28 7400
6224411 KCFM160R12HD07W4 KCFM160R12HD07W4 160.0000 6.299 169.5400 6.675 40.0 1.575 66.7000 2.626 90.0000 3.543 62.9700 2.479 1.1000 .0430 12 4 5.79 6500
6224412 KCFM200R16HD07W4 KCFM200R16HD07W4 200.0000 7.874 209.5300 8.249 60.0 2.363 101.6000 4.000 130.0000 5.118 62.9700 2.479 1.0900 .0430 16 4 8.74 5700
6224413 KCFM250R24HD07W6 KCFM250R24HD07W6 250.0000 9.843 259.5400 10.218 60.0 2.363 101.6000 4.000 130.0000 5.118 62.9700 2.479 1.1000 .0430 24 6 9.92 5100
KCFM™ 45 • Cast Iron

Shell Mills • Fine Finishing
(6 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Face MillingFace Milling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Number of Adjustable Inserts Weight Kilograms Max RPM
6224414 KCFM080R08HD07W2AS KCFM080R08HD07W2AS 80.0000 3.150 89.5300 3.525 27.0 1.064     81.4000 3.205 50.0000 1.968 1.0900 .0430 8 2 1.71 9600
6224415 KCFM100R08HD07W2AS KCFM100R08HD07W2AS 100.0000 3.937 109.5300 4.312 32.0 1.26     101.4000 3.992 50.0000 1.968 1.0900 .0430 8 2 2.45 8400
6224416 KCFM125R10HD07W2AS KCFM125R10HD07W2AS 125.0000 4.921 134.5300 5.297 40.0 1.575     89.0000 3.504 63.0000 2.480 1.0900 .0430 10 2 4.32 7400
6224417 KCFM160R12HD07W4AS KCFM160R12HD07W4AS 160.0000 6.299 169.5300 6.675 40.0 1.575 66.7000 2.626 90.0000 3.543 63.0000 2.480 1.0900 .0430 12 4 5.86 6500
6224418 KCFM200R16HD07W4AS KCFM200R16HD07W4AS 200.0000 7.874 209.5300 8.249 60.0 2.363 101.6000 4.000 130.0000 5.118 63.0000 2.480 1.0900 .0430 16 4 8.80 5700
6224419 KCFM250R24HD07W6AS KCFM250R24HD07W6AS 250.0000 9.843 259.5400 10.218 60.0 2.363 101.6000 4.000 130.0000 5.118 63.0000 2.480 1.0900 .0430 24 6 10.04 5100
Face Milling

KCFM™ 45 • Finishing Inserts • IC12 EN
(1 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
6210839 SDHN1204ZZEN4W SDHN43ZZEN4W KC514M 12.7000 .5000 4.7600 .1870 12.6000 .4960 8.7000 .3430 0.0800 .0030 4
Face Milling

KCFM™ 45 • FInishing Inserts • IC12 SN
(1 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
6210797 SDHN1204ZZSN4W SDHN43ZZSN4W KBK50 12.7000 .5000 4.7600 .1870 12.5800 .4950 8.7000 .3430 0.0800 .0030 4