O.D. and I.D. Turning

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (7326)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7310)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7310)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7310)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7310)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7310)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7326)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7326)
  • M Stainless Steel (4737)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4737)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4737)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4737)
  • K Cast Iron (4046)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3991)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3980)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3798)
  • N Non-Ferrous Materials (927)
    • N1
      Wrought Aluminum
      (487)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (652)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (209)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (925)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (727)
    • N6
      Carbon, Graphite Composites, CFRP
      (382)
    • N7
      MMC's
      (552)
  • S High-Temp Alloys (4525)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4490)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4502)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4502)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3270)
  • H Hardened Materials (982)
    • H1
      Hardened Materials 44-48 HRC
      (982)
    • H2
      Hardened Materials 48-55 HRC
      (961)
    • H3
      Hardened Materials 56-60 HRC
      (961)
    • H4
      Hardened Materials >60 HRC
      (630)
Select First Choice
  • CN (947)
  • DE (942)
  • GB (246)
  • IN (365)
  • US (961)
Applications
  • Back Boring Back Boring (1198)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (166)
  • Blind Hole Finishing Blind Hole Finishing (166)
  • CRT Boring CRT Boring (164)
  • CRT Profiling CRT Profiling (164)
  • Chamfer Milling Chamfer Milling (164)
  • Chamfer Turning Chamfer Turning (1994)
  • Convex Drilling Convex Drilling (1)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (1)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cut-Off Cut-Off (175)
  • Deep Grooving Deep Grooving (175)
  • Drilling Drilling (165)
  • Face Grooving Face Grooving (11)
  • Face Milling Face Milling (164)
  • Facing Facing (2446)
  • Grooving Grooving (181)
  • ID Facing ID Facing (173)
  • ID Grooving ID Grooving (186)
  • ID Thread Turning ID Thread Turning (17520)
  • Inclined Entry Drilling Inclined Entry Drilling (1)
  • Inclined Exit Drilling Inclined Exit Drilling (1)
  • Multiple Direction Cutting Multiple Direction Cutting (3908)
  • OD Thread Turning OD Thread Turning (13)
  • Plunge Turning Plunge Turning (2004)
  • Pre-Condition Pre-Condition (1)
  • Profiling Profiling (3274)
  • Shoulder Milling Shoulder Milling (164)
  • Stacked Plates Drilling Stacked Plates Drilling (1)
  • TRN Boring TRN Boring (1574)
  • Threading Threading (175)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (166)
  • Through Hole Finishing Through Hole Finishing (166)
  • Turning Turning (2502)
  • X-Offset Drilling X-Offset Drilling (1)
Cutting Condition
  • Heavily Interrupted Cut (2180)
  • Interrupted (174)
  • Lightly Interrupted Cut (2992)
  • Smooth Cut (6079)
  • Varying Depth of Cut (3008)
Tool Cutting Edge Angle
  • 45.0 (354)
  • 48.0 (9)
  • 49.783 (2)
  • 50.0 (29)
  • 60.0 (46)
  • 62.5 (56)
  • 63.0 (30)
  • 72.5 (29)
  • 75.0 (622)
  • 85.0 (24)
  • 89.0 (2)
  • 90.0 (1062)
  • 91.0 (3)
  • 92.0 (5)
  • 93.0 (929)
  • 95.0 (1325)
  • 97.0 (10)
  • 97.5 (4)
  • 105.0 (4)
  • 107.5 (152)
  • 117.5 (14)
  • 140.0 (4)
to
Cutting Edges Per Insert
  • 0.0 (141)
  • 1.0 (668)
  • 2.0 (3592)
  • 3.0 (2010)
  • 4.0 (5180)
  • 6.0 (2555)
  • 8.0 (3591)
  • 16.0 (2)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.0 (1)
  • 0.03 (2)
  • 0.038 (8)
  • 0.05 (22)
  • 0.051 (3)
  • 0.1 (251)
  • 0.102 (80)
  • 0.127 (4)
  • 0.177 (13)
  • 0.178 (5)
  • 0.18 (39)
  • 0.2 (685)
  • 0.203 (171)
  • 0.3 (46)
  • 0.34 (6)
  • 0.38 (36)
  • 0.381 (15)
  • 0.394 (2)
  • 0.396 (24)
  • 0.397 (549)
  • 0.4 (3448)
  • 0.406 (78)
  • 0.5 (68)
  • 0.6 (9)
  • 0.703 (4)
  • 0.787 (19)
  • 0.79 (58)
  • 0.791 (4)
  • 0.792 (36)
  • 0.794 (759)
  • 0.795 (2)
  • 0.8 (5783)
  • 1.0 (15)
  • 1.188 (2)
  • 1.19 (55)
  • 1.191 (647)
  • 1.2 (3595)
  • 1.5 (4)
  • 1.587 (36)
  • 1.588 (259)
  • 1.6 (1717)
  • 1.984 (2)
  • 2.0 (5)
  • 2.38 (3)
  • 2.381 (42)
  • 2.4 (359)
  • 3.0 (24)
  • 3.175 (38)
  • 3.18 (26)
  • 3.2 (52)
  • 4.0 (50)
  • 4.7625 (122)
  • 5.0 (47)
  • 6.0 (58)
  • 6.35 (240)
  • 7.9375 (25)
  • 8.0 (30)
  • 9.525 (59)
  • 10.0 (42)
  • 12.5 (13)
  • 12.7 (40)
  • 15.875 (2)
  • 16.0 (10)
  • 25.4 (2)
  • -4999.5 (5)
to
Corner Radius
  • 0.0 (1)
  • 0.0011 (2)
  • 0.0015 (8)
  • 0.002 (25)
  • 0.004 (276)
  • 0.005 (4)
  • 0.007 (57)
  • 0.008 (758)
  • 0.0083 (40)
  • 0.0118 (30)
  • 0.012 (16)
  • 0.013 (6)
  • 0.015 (54)
  • 0.0155 (2)
  • 0.0156 (3758)
  • 0.016 (259)
  • 0.0197 (64)
  • 0.02 (4)
  • 0.031 (225)
  • 0.0311 (4)
  • 0.0312 (409)
  • 0.0313 (6015)
  • 0.0315 (8)
  • 0.032 (34)
  • 0.0394 (15)
  • 0.0468 (2)
  • 0.0469 (3998)
  • 0.047 (233)
  • 0.0472 (2)
  • 0.048 (10)
  • 0.0487 (20)
  • 0.0591 (4)
  • 0.0625 (1871)
  • 0.063 (140)
  • 0.0781 (5)
  • 0.0787 (2)
  • 0.0938 (376)
  • 0.094 (32)
  • 0.1181 (24)
  • 0.125 (102)
  • 0.126 (5)
  • 0.1563 (38)
  • 0.1575 (50)
  • 0.1875 (122)
  • 0.1969 (47)
  • 0.197 (2)
  • 0.2362 (58)
  • 0.25 (240)
  • 0.312 (20)
  • 0.3125 (25)
  • 0.315 (30)
  • 0.375 (59)
  • 0.3935 (3)
  • 0.3937 (39)
  • 0.4688 (2)
  • 0.4922 (13)
  • 0.5 (40)
  • 0.625 (2)
  • 0.6299 (5)
  • 0.63 (5)
  • 1.0 (2)
  • -4999.5 (5)
to
Application
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1938)
  • Interrupted (23)
  • Lightly Interrupted Cut (2733)
  • Smooth Cut (5808)
  • Varying Depth of Cut (2766)
Grade Of Cutting Tool
  • 13E (169)
  • 241 (37)
  • AC5 (43)
  • CG4 (27)
  • CL4 (120)
  • CM2 (163)
  • CM3 (208)
  • CM4 (117)
  • CM5 (35)
  • CPX (165)
  • CW2 (66)
  • GX (136)
  • HT2 (64)
  • HTX (83)
  • K060 (139)
  • K090 (299)
  • K1 (89)
  • K10M (145)
  • K10P (149)
  • K10U (157)
  • K11 (11)
  • K15U (136)
  • K20K (192)
  • K21 (177)
  • K25M (129)
  • K25P (171)
  • K2884 (17)
  • K2885 (30)
  • K313 (487)
  • K35P (85)
  • K420 (210)
  • K45 (183)
  • K6 (38)
  • K68 (438)
  • K8 (1)
  • K8735 (5)
  • KB1340 (104)
  • KB1345 (98)
  • KB1610 (175)
  • KB1625 (143)
  • KB1630 (118)
  • KB5610 (134)
  • KB5625 (195)
  • KB5630 (83)
  • KB9610 (249)
  • KB9640 (133)
  • KBH10 (192)
  • KBH10B (97)
  • KBH20 (240)
  • KBH20B (98)
  • KBK35 (48)
  • KBK45 (26)
  • KC210 (165)
  • KC250 (175)
  • KC5010 (896)
  • KC5020P (18)
  • KC5025 (509)
  • KC514M (3)
  • KC522M (3)
  • KC525M (2)
  • KC5410 (295)
  • KC5510 (189)
  • KC5525 (82)
  • KC710 (106)
  • KC715M (7)
  • KC720 (325)
  • KC722 (37)
  • KC725M (41)
  • KC730 (626)
  • KC7310 (267)
  • KC732 (326)
  • KC735M (2)
  • KC740 (9)
  • KC792M (8)
  • KC8050 (669)
  • KC810 (491)
  • KC850 (684)
  • KC9010 (358)
  • KC9025 (691)
  • KC910 (483)
  • KC9105 (374)
  • KC9110 (878)
  • KC9120 (392)
  • KC9125 (651)
  • KC9125RR (47)
  • KC9140 (389)
  • KC9145 (209)
  • KC915M (3)
  • KC920M (11)
  • KC9215 (249)
  • KC9225 (570)
  • KC9240 (481)
  • KC9240NEW (454)
  • KC9245 (241)
  • KC925M (16)
  • KC9315 (589)
  • KC9320 (348)
  • KC9325 (360)
  • KC935 (583)
  • KC935M (1)
  • KC950 (440)
  • KC990 (455)
  • KCD25 (104)
  • KCK05 (381)
  • KCK05B (195)
  • KCK15 (353)
  • KCK15B (391)
  • KCK20 (501)
  • KCK20B (431)
  • KCM15 (470)
  • KCM15B (295)
  • KCM25 (500)
  • KCM25B (384)
  • KCM35 (268)
  • KCM35B (156)
  • KCP05 (401)
  • KCP05B (151)
  • KCP10 (743)
  • KCP10B (567)
  • KCP15 (2)
  • KCP25 (825)
  • KCP25B (666)
  • KCP30 (398)
  • KCP30B (210)
  • KCP40 (332)
  • KCP40B (234)
  • KCPK05 (195)
  • KCPK30 (8)
  • KCS10 (204)
  • KCS10B (340)
  • KCSM30 (3)
  • KCU10 (904)
  • KCU25 (505)
  • KD050 (189)
  • KD081 (172)
  • KD100 (147)
  • KD105 (20)
  • KD120 (211)
  • KD1400 (147)
  • KD1405 (108)
  • KD1425 (168)
  • KD200 (9)
  • KD230 (14)
  • KD240 (15)
  • KM1 (178)
  • KMF (44)
  • KT1120 (18)
  • KT125 (213)
  • KT150 (210)
  • KT175 (242)
  • KT195M (7)
  • KT315 (429)
  • KT325 (100)
  • KT5020 (24)
  • KTP10 (91)
  • KU10 (61)
  • KU10T (272)
  • KU30T (369)
  • KY1310 (199)
  • KY1320 (215)
  • KY1335 (5)
  • KY1525 (25)
  • KY1540 (187)
  • KY1615 (360)
  • KY2000 (200)
  • KY2100 (118)
  • KY2200 (1)
  • KY3000 (221)
  • KY3400 (227)
  • KY3500 (304)
  • KY4000 (97)
  • KY4300 (145)
  • KY4400 (263)
  • KYHS10 (3)
  • KYK10 (166)
  • KYK25 (190)
  • KYK35 (245)
  • KYS25 (145)
  • KYS30 (162)
  • KYSM10 (3)
  • KYSP30 (5)
  • MC2 (59)
  • MC3 (2)
  • NL200 (36)
  • NL250 (152)
  • NL300 (141)
  • NL400 (40)
  • NL920 (137)
  • P10 (17)
  • P20 (9)
  • P25 (125)
  • P2F (34)
  • PS5 (44)
  • SF30 (2)
  • SP0819 (93)
  • SP0A00 (8)
  • SP3019 (120)
  • SP4019 (96)
  • SP4200 (8)
  • SP61EJ (44)
  • SPADAP (7)
  • SPM5F2 (2)
  • SPMQMA (7)
  • SPSREJ (16)
  • TN7035 (24)
  • TTX (25)
  • X00511 (36)
  • YY87EL (8)
  • YYMITA (9)
Wiper Insert
  • N (16838)
  • Y (761)
Minimum Axial Groove Diameter
  • 0.18 (10)
  • 0.2039 (1)
  • 0.204 (13)
  • 0.2079 (1)
  • 0.208 (10)
  • 0.218 (4)
  • 0.224 (7)
  • 0.2276 (2)
  • 0.228 (10)
  • 0.23 (1)
  • 0.2339 (5)
  • 0.234 (15)
  • 0.2362 (3)
  • 0.243 (2)
  • 0.244 (1)
  • 0.2598 (2)
  • 0.26 (7)
  • 0.267 (4)
  • 0.272 (1)
  • 0.275 (11)
  • 0.278 (1)
  • 0.279 (5)
  • 0.2791 (1)
  • 0.28 (3)
  • 0.285 (31)
  • 0.292 (6)
  • 0.2921 (1)
  • 0.2957 (1)
  • 0.296 (10)
  • 0.2992 (3)
  • 0.3 (5)
  • 0.321 (4)
  • 0.346 (1)
  • 0.347 (4)
  • 0.356 (6)
  • 0.3575 (2)
  • 0.358 (7)
  • 0.36 (5)
  • 0.3602 (1)
  • 0.362 (1)
  • 0.413 (1)
  • 0.415 (16)
  • 0.431 (1)
  • 0.433 (8)
  • 0.4331 (10)
  • 0.4378 (1)
  • 0.438 (5)
  • 0.439 (3)
  • 0.4799 (5)
  • 0.48 (33)
  • 0.49 (2)
  • 0.508 (2)
  • 0.5118 (26)
  • 0.512 (11)
  • 0.5181 (1)
  • 0.538 (1)
  • 0.54 (2)
  • 0.563 (6)
  • 0.6 (53)
  • 0.6299 (44)
  • 0.63 (13)
  • 0.65 (1)
  • 0.7299 (2)
  • 0.73 (10)
  • 0.731 (4)
  • 0.77 (48)
  • 0.7701 (7)
  • 0.787 (12)
  • 0.7874 (65)
  • 0.836 (1)
  • 0.842 (1)
  • 0.85 (13)
  • 0.855 (1)
  • 0.9299 (6)
  • 0.93 (44)
  • 0.9799 (1)
  • 0.98 (19)
  • 0.984 (18)
  • 0.9843 (67)
  • 1.0 (2)
  • 1.03 (1)
  • 1.06 (1)
  • 1.063 (2)
  • 1.1811 (2)
  • 1.19 (5)
  • 1.2 (61)
  • 1.22 (11)
  • 1.2598 (121)
  • 1.26 (38)
  • 1.268 (1)
  • 1.286 (2)
  • 1.2993 (2)
  • 1.3 (20)
  • 1.31 (1)
  • 1.312 (1)
  • 1.42 (1)
  • 1.4567 (1)
  • 1.457 (3)
  • 1.47 (26)
  • 1.55 (2)
  • 1.56 (1)
  • 1.5748 (138)
  • 1.575 (45)
  • 1.625 (1)
  • 1.6929 (2)
  • 1.693 (1)
  • 1.705 (25)
  • 1.732 (11)
  • 1.7323 (1)
  • 1.76 (42)
  • 1.77 (1)
  • 1.772 (2)
  • 1.81 (2)
  • 1.875 (1)
  • 1.8898 (5)
  • 1.89 (1)
  • 1.9685 (164)
  • 1.969 (66)
  • 2.0 (26)
  • 2.01 (19)
  • 2.047 (2)
  • 2.125 (1)
  • 2.126 (31)
  • 2.165 (2)
  • 2.1654 (7)
  • 2.25 (6)
  • 2.323 (2)
  • 2.362 (2)
  • 2.3622 (60)
  • 2.4 (45)
  • 2.48 (25)
  • 2.4803 (72)
  • 2.5 (12)
  • 2.559 (1)
  • 2.582 (1)
  • 2.592 (3)
  • 2.65 (3)
  • 2.7559 (44)
  • 2.756 (40)
  • 2.87 (1)
  • 2.913 (4)
  • 3.03 (34)
  • 3.15 (53)
  • 3.25 (11)
  • 3.386 (70)
  • 3.543 (6)
  • 3.701 (2)
  • 3.937 (52)
  • 4.094 (2)
  • 4.173 (32)
  • 4.1732 (7)
  • 4.6457 (1)
  • 4.646 (1)
  • 4.724 (2)
  • 5.118 (2)
  • 5.9055 (1)
  • 5.906 (1)
to
Minimum Axial Groove Diameter
  • 4.57 (10)
  • 5.18 (9)
  • 5.182 (5)
  • 5.28 (9)
  • 5.283 (2)
  • 5.54 (4)
  • 5.69 (7)
  • 5.78 (5)
  • 5.79 (5)
  • 5.791 (2)
  • 5.84 (1)
  • 5.94 (17)
  • 5.944 (3)
  • 6.0 (3)
  • 6.172 (2)
  • 6.2 (1)
  • 6.6 (5)
  • 6.604 (4)
  • 6.78 (4)
  • 6.9 (1)
  • 6.98 (5)
  • 6.985 (5)
  • 6.99 (1)
  • 7.06 (1)
  • 7.08 (1)
  • 7.09 (5)
  • 7.1 (3)
  • 7.239 (8)
  • 7.24 (23)
  • 7.417 (1)
  • 7.42 (6)
  • 7.51 (2)
  • 7.518 (1)
  • 7.52 (8)
  • 7.6 (3)
  • 7.62 (5)
  • 8.15 (2)
  • 8.153 (2)
  • 8.8 (1)
  • 8.81 (3)
  • 8.814 (1)
  • 9.04 (5)
  • 9.05 (1)
  • 9.08 (2)
  • 9.09 (6)
  • 9.093 (1)
  • 9.14 (3)
  • 9.144 (2)
  • 9.15 (1)
  • 9.2 (1)
  • 10.5 (1)
  • 10.54 (5)
  • 10.541 (11)
  • 10.95 (1)
  • 11.0 (18)
  • 11.12 (1)
  • 11.125 (4)
  • 11.13 (1)
  • 11.15 (3)
  • 12.19 (20)
  • 12.192 (17)
  • 12.45 (2)
  • 12.9 (3)
  • 13.0 (37)
  • 13.16 (1)
  • 13.67 (1)
  • 13.716 (2)
  • 14.3 (6)
  • 15.24 (53)
  • 16.0 (57)
  • 16.51 (1)
  • 18.54 (3)
  • 18.542 (9)
  • 18.567 (4)
  • 19.55 (1)
  • 19.558 (28)
  • 19.56 (26)
  • 20.0 (77)
  • 21.23 (1)
  • 21.387 (1)
  • 21.59 (13)
  • 21.717 (1)
  • 23.62 (24)
  • 23.622 (26)
  • 24.89 (2)
  • 24.892 (18)
  • 25.0 (85)
  • 25.4 (2)
  • 26.16 (1)
  • 26.924 (1)
  • 27.0 (2)
  • 30.0 (2)
  • 30.226 (4)
  • 30.23 (1)
  • 30.48 (59)
  • 30.98 (2)
  • 30.988 (2)
  • 30.99 (9)
  • 32.0 (160)
  • 32.664 (2)
  • 33.0 (2)
  • 33.02 (20)
  • 33.274 (1)
  • 33.325 (1)
  • 36.068 (1)
  • 37.0 (4)
  • 37.338 (12)
  • 37.34 (14)
  • 39.37 (2)
  • 39.624 (1)
  • 40.0 (183)
  • 41.275 (1)
  • 43.0 (3)
  • 43.307 (18)
  • 43.31 (7)
  • 44.0 (12)
  • 44.7 (12)
  • 44.704 (30)
  • 44.96 (1)
  • 45.0 (2)
  • 45.974 (2)
  • 47.625 (1)
  • 48.0 (6)
  • 50.0 (231)
  • 50.8 (26)
  • 51.05 (3)
  • 51.054 (16)
  • 52.0 (2)
  • 53.975 (1)
  • 54.0 (31)
  • 55.0 (9)
  • 57.15 (6)
  • 59.0 (2)
  • 60.0 (62)
  • 60.96 (45)
  • 63.0 (96)
  • 63.5 (12)
  • 65.0 (1)
  • 65.583 (1)
  • 65.837 (3)
  • 67.31 (3)
  • 70.0 (84)
  • 72.898 (1)
  • 74.0 (4)
  • 76.96 (7)
  • 76.962 (27)
  • 80.0 (53)
  • 82.55 (11)
  • 86.0 (70)
  • 90.0 (6)
  • 94.0 (2)
  • 100.0 (52)
  • 104.0 (2)
  • 106.0 (39)
  • 118.0 (2)
  • 120.0 (2)
  • 130.0 (2)
  • 150.0 (2)