Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Kenloc™ • M-Style Clamping • For Negative Style Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (684)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (684)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (684)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (684)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (684)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (684)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (684)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (684)
  • M Stainless Steel (684)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (684)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (684)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (684)
  • K Cast Iron (686)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (686)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (686)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (684)
  • N Non-Ferrous Materials (662)
    • N1
      Wrought Aluminum
      (623)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (623)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (275)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (662)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (623)
    • N6
      Carbon, Graphite Composites, CFRP
      (553)
    • N7
      MMC's
      (623)
  • S High-Temp Alloys (686)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (686)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (686)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (686)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (684)
  • H Hardened Materials (561)
    • H1
      Hardened Materials 44-48 HRC
      (561)
    • H2
      Hardened Materials 48-55 HRC
      (561)
    • H3
      Hardened Materials 56-60 HRC
      (561)
    • H4
      Hardened Materials >60 HRC
      (404)
Applications
Applications
  • Chamfer Turning Chamfer Turning (45)
  • Facing Facing (442)
  • ID Facing ID Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (441)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (484)
  • TRN Boring TRN Boring (147)
  • Turning Turning (674)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (683)
  • Interrupted (520)
  • Lightly Interrupted Cut (684)
  • Smooth Cut (686)
  • Varying Depth of Cut (684)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (60)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (15)
  • 60.0 (12)
  • 62.5 (13)
  • 63.0 (4)
  • 72.5 (12)
  • 75.0 (144)
  • 90.0 (90)
  • 91.0 (1)
  • 93.0 (164)
  • 95.0 (124)
  • 107.5 (36)
  • 117.5 (2)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (119)
  • Toolholder (437)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (343)
  • 2.0 (405)
  • 3.0 (126)
  • 4.0 (512)
  • 6.0 (143)
  • 8.0 (369)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (283)
  • 0.008 in (283)
  • 0.014 in (47)
  • 0.016 in (510)
  • 0.024 in (21)
  • 0.031 in (638)
  • 0.047 in (633)
  • 0.062 in (81)
  • 0.063 in (548)
  • 0.094 in (117)
  • 0.095 in (329)
  • 0.125 in (43)
  • 0.126 in (142)
  • 0.157 in (36)
  • 0.188 in (1)
  • 0.25 in (20)
  • 0.375 in (6)
  • 0.5 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (283)
  • 0.2 mm (283)
  • 0.351 mm (47)
  • 0.4 mm (510)
  • 0.601 mm (21)
  • 0.8 mm (638)
  • 1.201 mm (633)
  • 1.576 mm (81)
  • 1.6 mm (548)
  • 2.375 mm (117)
  • 2.401 mm (329)
  • 3.176 mm (43)
  • 3.2 mm (142)
  • 4.0 mm (36)
  • 4.775 mm (1)
  • 6.351 mm (20)
  • 9.525 mm (6)
  • 12.701 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (482)
  • CM2 (466)
  • CM3 (364)
  • CPX (460)
  • K090 (608)
  • K10M (544)
  • K10P (530)
  • K10U (425)
  • K15U (421)
  • K20K (599)
  • K25M (482)
  • K25P (538)
  • K313 (623)
  • K35P (357)
  • K420 (517)
  • K68 (618)
  • KB9610 (363)
  • KBH10 (363)
  • KBH20 (363)
  • KC210 (363)
  • KC250 (371)
  • KC5010 (680)
  • KC5025 (608)
  • KC5410 (553)
  • KC5510 (598)
  • KC720 (464)
  • KC730 (563)
  • KC7310 (606)
  • KC732 (419)
  • KC8050 (677)
  • KC810 (633)
  • KC850 (674)
  • KC9010 (595)
  • KC9025 (679)
  • KC910 (626)
  • KC9105 (547)
  • KC9110 (684)
  • KC9120 (661)
  • KC9125 (682)
  • KC9140 (676)
  • KC9145 (579)
  • KC9215 (600)
  • KC9225 (615)
  • KC9240 (620)
  • KC9240NEW (614)
  • KC9245 (606)
  • KC9315 (643)
  • KC9320 (618)
  • KC9325 (627)
  • KC935 (667)
  • KC950 (639)
  • KC990 (676)
  • KCK05 (620)
  • KCK05B (547)
  • KCK15 (613)
  • KCK15B (621)
  • KCK20 (618)
  • KCK20B (619)
  • KCM15 (601)
  • KCM15B (565)
  • KCM25 (614)
  • KCM25B (601)
  • KCM35 (580)
  • KCM35B (416)
  • KCP05 (478)
  • KCP05B (394)
  • KCP10 (682)
  • KCP10B (663)
  • KCP25 (682)
  • KCP25B (666)
  • KCP25C (595)
  • KCP30 (676)
  • KCP30B (541)
  • KCP40 (554)
  • KCP40B (575)
  • KCPK05 (531)
  • KCS10B (513)
  • KCU10 (670)
  • KCU25 (608)
  • KD120 (353)
  • KT125 (385)
  • KT175 (400)
  • KT315 (446)
  • KU10T (429)
  • KU30T (643)
  • KY1320 (526)
  • KY1615 (540)
  • KY3000 (560)
  • KY3400 (472)
  • KY3500 (564)
  • KY4400 (520)
  • KYHK15B (535)
  • KYK25 (436)
  • KYK35 (562)
  • NL250 (592)
  • NL300 (452)
  • NL920 (469)
  • SP0819 (446)
  • SP3019 (476)
  • SP4019 (403)
Hand Of Tool
Hand Of Tool
  • L (226)
  • N (79)
  • R (251)
Wiper Insert
Wiper Insert
  • N (686)
  • Y (381)
F Dimension
F Dimension
  • 0.0 mm (19)
  • 6.351 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (1)
  • 9.525 mm (6)
  • 10.0 mm (4)
  • 12.0 mm (5)
  • 12.25 mm (1)
  • 12.5 mm (8)
  • 12.701 mm (16)
  • 13.75 mm (1)
  • 13.775 mm (1)
  • 15.8 mm (1)
  • 15.875 mm (12)
  • 16.0 mm (1)
  • 16.825 mm (1)
  • 17.0 mm (2)
  • 19.05 mm (10)
  • 19.075 mm (2)
  • 19.675 mm (1)
  • 19.701 mm (1)
  • 20.0 mm (4)
  • 20.5 mm (1)
  • 21.026 mm (2)
  • 22.0 mm (20)
  • 22.225 mm (6)
  • 22.35 mm (2)
  • 23.175 mm (5)
  • 24.0 mm (5)
  • 25.0 mm (11)
  • 25.201 mm (2)
  • 25.401 mm (46)
  • 25.5 mm (1)
  • 26.425 mm (1)
  • 27.0 mm (20)
  • 27.375 mm (2)
  • 28.026 mm (2)
  • 28.701 mm (2)
  • 30.0 mm (10)
  • 31.75 mm (83)
  • 31.776 mm (6)
  • 32.0 mm (51)
  • 33.551 mm (2)
  • 34.375 mm (2)
  • 35.0 mm (11)
  • 38.0 mm (8)
  • 38.1 mm (47)
  • 38.125 mm (3)
  • 38.375 mm (2)
  • 40.0 mm (10)
  • 40.5 mm (8)
  • 43.0 mm (12)
  • 44.95 mm (1)
  • 46.25 mm (3)
  • 48.0 mm (8)
  • 50.0 mm (3)
  • 50.801 mm (36)
  • 50.825 mm (1)
  • 53.0 mm (16)
  • 57.151 mm (1)
  • 57.651 mm (1)
  • 63.5 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (19)
  • 0.25 in (2)
  • 0.313 in (2)
  • 0.315 in (1)
  • 0.375 in (6)
  • 0.394 in (4)
  • 0.473 in (5)
  • 0.482 in (1)
  • 0.492 in (8)
  • 0.5 in (16)
  • 0.541 in (1)
  • 0.542 in (1)
  • 0.622 in (1)
  • 0.625 in (12)
  • 0.63 in (1)
  • 0.662 in (1)
  • 0.669 in (2)
  • 0.75 in (10)
  • 0.751 in (2)
  • 0.775 in (1)
  • 0.776 in (1)
  • 0.787 in (4)
  • 0.807 in (1)
  • 0.829 in (2)
  • 0.866 in (20)
  • 0.875 in (6)
  • 0.88 in (2)
  • 0.912 in (5)
  • 0.946 in (5)
  • 0.984 in (11)
  • 0.992 in (2)
  • 1.0 in (46)
  • 1.004 in (1)
  • 1.04 in (1)
  • 1.063 in (20)
  • 1.078 in (2)
  • 1.103 in (2)
  • 1.131 in (2)
  • 1.181 in (10)
  • 1.25 in (83)
  • 1.252 in (6)
  • 1.26 in (51)
  • 1.321 in (2)
  • 1.353 in (2)
  • 1.379 in (11)
  • 1.496 in (8)
  • 1.5 in (47)
  • 1.502 in (3)
  • 1.512 in (2)
  • 1.575 in (10)
  • 1.594 in (8)
  • 1.693 in (12)
  • 1.77 in (1)
  • 1.821 in (3)
  • 1.891 in (8)
  • 1.969 in (3)
  • 2.0 in (36)
  • 2.001 in (1)
  • 2.087 in (16)
  • 2.25 in (1)
  • 2.27 in (1)
  • 2.5 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 44.0 mm (2)
  • 54.0 mm (22)
  • 70.0 mm (27)
  • 80.0 mm (2)
  • 86.0 mm (34)
  • 90.0 mm (4)
  • 100.0 mm (25)
  • 106.0 mm (26)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 150.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.732 in (2)
  • 2.126 in (22)
  • 2.757 in (27)
  • 3.15 in (2)
  • 3.386 in (34)
  • 3.543 in (4)
  • 3.938 in (25)
  • 4.173 in (26)
  • 4.724 in (2)
  • 5.118 in (2)
  • 5.906 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (98)
  • E (73)
  • S (385)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (470)
  • NEGATIVE-ZERO (86)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (4)
  • 1.575 in (26)
  • 1.969 in (44)
  • 2.362 in (38)
  • 2.757 in (27)
  • 4.529 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (4)
  • 40.0 mm (26)
  • 50.0 mm (44)
  • 60.0 mm (38)
  • 70.0 mm (27)
  • 115.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (10)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (190)
  • D-DIAMOND/RHOMBIC 55 (122)
  • R-ROUND (29)
  • S-SQUARE 90 (130)
  • T-TRIANGLE 60 (112)
  • V-DIAMOND/RHOMBIC 35 (73)
  • W-TRIGON 80 (31)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (445)
  • B L (408)
  • C A (629)
  • C N (598)
  • D P (322)
  • H T (461)
  • H W (686)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (437)
  • TAPER SHANK (119)
System Size
System Size
  • KM32 (12)
  • KM32TS (6)
  • KM40TS (25)
  • KM50TS (23)
  • KM63TS (26)
  • KM80TS (27)
Back-End Diameter
Back-End Diameter
  • 32.0 mm (22)
  • 40.0 mm (49)
  • 50.0 mm (67)
  • 63.0 mm (70)
  • 80.0 mm (42)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.26 in (22)
  • 1.575 in (49)
  • 1.969 in (67)
  • 2.48 in (70)
  • 3.15 in (42)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.5 in (9)
  • 0.625 in (10)
  • 0.63 in (4)
  • 0.75 in (54)
  • 0.787 in (18)
  • 0.984 in (47)
  • 1.0 in (112)
  • 1.25 in (82)
  • 1.26 in (47)
  • 1.5 in (48)
  • 1.575 in (3)
  • 2.0 in (3)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 12.701 mm (9)
  • 15.875 mm (10)
  • 16.0 mm (4)
  • 19.05 mm (54)
  • 20.0 mm (18)
  • 25.0 mm (47)
  • 25.401 mm (112)
  • 31.75 mm (82)
  • 32.0 mm (47)
  • 38.1 mm (48)
  • 40.0 mm (3)
  • 50.801 mm (3)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.5 in (10)
  • 0.625 in (10)
  • 0.63 in (4)
  • 0.75 in (55)
  • 0.787 in (18)
  • 0.984 in (69)
  • 1.0 in (118)
  • 1.25 in (74)
  • 1.26 in (25)
  • 1.5 in (48)
  • 1.575 in (3)
  • 2.0 in (3)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 12.701 mm (10)
  • 15.875 mm (10)
  • 16.0 mm (4)
  • 19.05 mm (55)
  • 20.0 mm (18)
  • 25.0 mm (69)
  • 25.401 mm (118)
  • 31.75 mm (74)
  • 32.0 mm (25)
  • 38.1 mm (48)
  • 40.0 mm (3)
  • 50.801 mm (3)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Beyond BLAST™

KM50TS™ Cutting Units • M-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
4098741 KM50TSMCLNL12BB KM50TSMCLNL12BB 50.0000 1.969 35.0000 1.378 130.0000 5.118 CN..120408RBB/CN..432RBB 0.33 1.45
    List price:
    $664,54 /each.
    Your price::
    Qty
    4098740 KM50TSMCLNR12BB KM50TSMCLNR12BB 50.0000 1.969 35.0000 1.378 130.0000 5.118 CN..120408RBB/CN..432RBB 0.33 1.45
      List price:
      $664,54 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
      1144903 KM32TSMTUNR16 KM32TSMTUNR16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
        List price:
        $261,95 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
        1144910 KM32TSMVHNL16 KM32TSMVHNL16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
          List price:
          $269,71 /each.
          Your price::
          Qty
          1144909 KM32TSMVHNR16 KM32TSMVHNR16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
            List price:
            $269,71 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is no longer available
            Replacement Product Please contact customer service for assistance
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
            3095643 KM32TSMDJNL1504