Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

External Machining

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1821)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1810)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1810)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1810)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1810)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1810)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1821)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1821)
  • M Stainless Steel (1816)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1816)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1816)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1816)
  • K Cast Iron (1886)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1886)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1880)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1862)
  • N Non-Ferrous Materials (1768)
    • N1
      Wrought Aluminum
      (1708)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1697)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (872)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1752)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1691)
    • N6
      Carbon, Graphite Composites, CFRP
      (1450)
    • N7
      MMC's
      (1691)
  • S High-Temp Alloys (1889)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1878)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1884)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1881)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1805)
  • H Hardened Materials (1562)
    • H1
      Hardened Materials 44-48 HRC
      (1562)
    • H2
      Hardened Materials 48-55 HRC
      (1553)
    • H3
      Hardened Materials 56-60 HRC
      (1553)
    • H4
      Hardened Materials >60 HRC
      (1167)
Select First Choice
  • CN (106)
  • DE (104)
  • GB (54)
  • IN (2)
  • SG (16)
  • US (136)
Applications
Applications
  • Chamfer Turning Chamfer Turning (49)
  • Facing Facing (1221)
  • ID Facing ID Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (1284)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (1164)
  • TRN Boring TRN Boring (343)
  • Turning Turning (1777)
Type of Thread
Type of Thread
  • 60 (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1822)
  • Interrupted (1011)
  • Lightly Interrupted Cut (1851)
  • Smooth Cut (1866)
  • Varying Depth of Cut (1842)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (198)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (16)
  • 62.5 (27)
  • 63.0 (19)
  • 72.5 (25)
  • 75.0 (291)
  • 85.0 (7)
  • 90.0 (350)
  • 91.0 (1)
  • 93.0 (446)
  • 95.0 (390)
  • 97.5 (1)
  • 105.0 (1)
  • 107.5 (90)
  • 117.5 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (264)
  • Toolholder (1318)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (1078)
  • 2.0 (1074)
  • 3.0 (305)
  • 4.0 (1168)
  • 6.0 (268)
  • 8.0 (737)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (55)
  • 0.001 in (102)
  • 0.002 in (272)
  • 0.004 in (982)
  • 0.008 in (937)
  • 0.014 in (121)
  • 0.016 in (1459)
  • 0.024 in (62)
  • 0.028 in (19)
  • 0.031 in (1717)
  • 0.047 in (1575)
  • 0.062 in (165)
  • 0.063 in (1210)
  • 0.078 in (7)
  • 0.079 in (7)
  • 0.094 in (195)
  • 0.095 in (597)
  • 0.119 in (13)
  • 0.125 in (110)
  • 0.126 in (262)
  • 0.157 in (71)
  • 0.187 in (13)
  • 0.188 in (48)
  • 0.189 in (3)
  • 0.197 in (77)
  • 0.237 in (80)
  • 0.25 in (92)
  • 0.313 in (16)
  • 0.315 in (5)
  • 0.375 in (20)
  • 0.394 in (4)
  • 0.492 in (6)
  • 0.5 in (15)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (55)
  • 0.025 mm (102)
  • 0.05 mm (272)
  • 0.1 mm (982)
  • 0.2 mm (937)
  • 0.351 mm (121)
  • 0.4 mm (1459)
  • 0.601 mm (62)
  • 0.701 mm (19)
  • 0.8 mm (1717)
  • 1.201 mm (1575)
  • 1.576 mm (165)
  • 1.6 mm (1210)
  • 1.975 mm (7)
  • 2.0 mm (7)
  • 2.375 mm (195)
  • 2.401 mm (597)
  • 3.0 mm (13)
  • 3.176 mm (110)
  • 3.2 mm (262)
  • 4.0 mm (71)
  • 4.75 mm (13)
  • 4.775 mm (48)
  • 4.801 mm (3)
  • 5.0 mm (77)
  • 6.0 mm (80)
  • 6.351 mm (92)
  • 7.95 mm (16)
  • 8.0 mm (5)
  • 9.525 mm (20)
  • 10.0 mm (4)
  • 12.5 mm (6)
  • 12.701 mm (15)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (949)
  • CM2 (904)
  • CM3 (795)
  • CPX (886)
  • K090 (1226)
  • K10M (1306)
  • K10P (1152)
  • K10U (1113)
  • K15U (1088)
  • K20K (1309)
  • K25M (1107)
  • K25P (1137)
  • K313 (1702)
  • K420 (993)
  • K68 (1576)
  • KB1610 (847)
  • KB9610 (995)
  • KBH10 (984)
  • KBH20 (1003)
  • KC5010 (1760)
  • KC5025 (1564)
  • KC5410 (1414)
  • KC5510 (1170)
  • KC720 (1246)
  • KC730 (1544)
  • KC7310 (1255)
  • KC732 (1208)
  • KC8050 (1765)
  • KC810 (1658)
  • KC850 (1751)
  • KC9010 (1397)
  • KC9025 (1691)
  • KC910 (1616)
  • KC9105 (1441)
  • KC9110 (1733)
  • KC9120 (1513)
  • KC9125 (1668)
  • KC9140 (1263)
  • KC9145 (1061)
  • KC9215 (1173)
  • KC9225 (1536)
  • KC9240 (1618)
  • KC9240NEW (1611)
  • KC9245 (1177)
  • KC9315 (1700)
  • KC9320 (1559)
  • KC9325 (1419)
  • KC935 (1670)
  • KC950 (1525)
  • KC990 (1567)
  • KCK05 (1538)
  • KCK05B (1333)
  • KCK15 (1488)
  • KCK15B (1569)
  • KCK20 (1597)
  • KCK20B (1601)
  • KCM15 (1503)
  • KCM15B (1373)
  • KCM25 (1598)
  • KCM25B (1527)
  • KCM35 (1376)
  • KCM35B (997)
  • KCP05 (1320)
  • KCP05B (915)
  • KCP10 (1641)
  • KCP10B (1644)
  • KCP25 (1687)
  • KCP25B (1713)
  • KCP25C (1429)
  • KCP30 (1645)
  • KCP30B (1132)
  • KCP40 (1029)
  • KCP40B (1114)
  • KCPK05 (1084)
  • KCS10B (1392)
  • KCU10 (1731)
  • KCU25 (1556)
  • KD050 (815)
  • KD081 (786)
  • KD1425 (829)
  • KT125 (878)
  • KT175 (1105)
  • KT315 (1272)
  • KU10T (1230)
  • KU30T (1560)
  • KY1320 (1095)
  • KY1615 (1177)
  • KY3000 (1147)
  • KY3400 (966)
  • KY3500 (1225)
  • KY4400 (1106)
  • KYHK15B (1147)
  • KYK25 (894)
  • KYK35 (1185)
  • NL250 (1155)
  • NL300 (874)
  • NL920 (983)
  • SP0819 (835)
  • SP3019 (922)
  • SP4019 (814)
Hand Of Tool
Hand Of Tool
  • L (634)
  • N (209)
  • R (739)
Wiper Insert
Wiper Insert
  • N (1898)
  • Y (1021)
F Dimension
F Dimension
  • 0.0 mm (42)
  • 4.0 mm (1)
  • 4.75 mm (3)
  • 5.0 mm (2)
  • 6.0 mm (5)
  • 6.351 mm (7)
  • 7.926 mm (2)
  • 7.95 mm (3)
  • 8.0 mm (8)
  • 9.425 mm (1)
  • 9.525 mm (25)
  • 9.951 mm (1)
  • 10.0 mm (22)
  • 11.0 mm (1)
  • 11.125 mm (1)
  • 11.15 mm (2)
  • 11.675 mm (1)
  • 12.0 mm (23)
  • 12.25 mm (1)
  • 12.5 mm (24)
  • 12.601 mm (5)
  • 12.625 mm (1)
  • 12.701 mm (65)
  • 13.0 mm (5)
  • 13.65 mm (2)
  • 13.75 mm (1)
  • 13.775 mm (2)
  • 13.925 mm (1)
  • 13.951 mm (1)
  • 14.0 mm (1)
  • 14.275 mm (1)
  • 14.425 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (2)
  • 15.775 mm (2)
  • 15.8 mm (1)
  • 15.875 mm (48)
  • 16.0 mm (32)
  • 16.5 mm (2)
  • 16.825 mm (1)
  • 17.0 mm (6)
  • 17.026 mm (2)
  • 17.475 mm (1)
  • 17.5 mm (2)
  • 17.776 mm (1)
  • 18.5 mm (2)
  • 18.95 mm (2)
  • 19.05 mm (29)
  • 19.075 mm (2)
  • 19.1 mm (1)
  • 19.175 mm (1)
  • 19.5 mm (1)
  • 19.875 mm (3)
  • 20.0 mm (41)
  • 20.5 mm (3)
  • 21.026 mm (2)
  • 21.076 mm (2)
  • 22.0 mm (31)
  • 22.225 mm (7)
  • 22.35 mm (2)
  • 23.151 mm (2)
  • 23.175 mm (5)
  • 24.0 mm (11)
  • 24.25 mm (2)
  • 25.0 mm (91)
  • 25.201 mm (2)
  • 25.401 mm (83)
  • 25.901 mm (5)
  • 26.625 mm (2)
  • 26.925 mm (2)
  • 27.0 mm (69)
  • 27.375 mm (2)
  • 28.026 mm (2)
  • 28.576 mm (6)
  • 28.651 mm (2)
  • 28.701 mm (3)
  • 29.725 mm (4)
  • 30.0 mm (19)
  • 31.75 mm (184)
  • 31.776 mm (6)
  • 32.0 mm (249)
  • 32.25 mm (6)
  • 33.551 mm (2)
  • 34.375 mm (2)
  • 35.0 mm (39)
  • 38.0 mm (18)
  • 38.1 mm (78)
  • 38.125 mm (4)
  • 38.375 mm (2)
  • 38.6 mm (2)
  • 40.0 mm (34)
  • 40.5 mm (8)
  • 43.0 mm (39)
  • 46.25 mm (3)
  • 48.0 mm (9)
  • 50.0 mm (10)
  • 50.801 mm (42)
  • 53.0 mm (23)
  • 59.0 mm (2)
  • 63.5 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (42)
  • 0.157 in (1)
  • 0.187 in (3)
  • 0.197 in (2)
  • 0.237 in (5)
  • 0.25 in (7)
  • 0.312 in (2)
  • 0.313 in (3)
  • 0.315 in (8)
  • 0.371 in (1)
  • 0.375 in (25)
  • 0.392 in (1)
  • 0.394 in (22)
  • 0.433 in (1)
  • 0.438 in (1)
  • 0.439 in (2)
  • 0.46 in (1)
  • 0.473 in (23)
  • 0.482 in (1)
  • 0.492 in (24)
  • 0.496 in (5)
  • 0.497 in (1)
  • 0.5 in (65)
  • 0.512 in (5)
  • 0.537 in (2)
  • 0.541 in (1)
  • 0.542 in (2)
  • 0.548 in (1)
  • 0.549 in (1)
  • 0.551 in (1)
  • 0.562 in (1)
  • 0.569 in (1)
  • 0.591 in (1)
  • 0.61 in (2)
  • 0.621 in (2)
  • 0.622 in (1)
  • 0.625 in (48)
  • 0.63 in (32)
  • 0.65 in (2)
  • 0.662 in (1)
  • 0.669 in (6)
  • 0.67 in (2)
  • 0.689 in (1)
  • 0.69 in (2)
  • 0.701 in (1)
  • 0.728 in (2)
  • 0.746 in (2)
  • 0.75 in (29)
  • 0.751 in (2)
  • 0.752 in (1)
  • 0.755 in (1)
  • 0.768 in (1)
  • 0.782 in (3)
  • 0.787 in (41)
  • 0.807 in (3)
  • 0.829 in (2)
  • 0.831 in (2)
  • 0.866 in (31)
  • 0.875 in (7)
  • 0.88 in (2)
  • 0.911 in (2)
  • 0.912 in (5)
  • 0.946 in (11)
  • 0.956 in (2)
  • 0.984 in (91)
  • 0.992 in (2)
  • 1.0 in (83)
  • 1.02 in (5)
  • 1.048 in (2)
  • 1.06 in (2)
  • 1.063 in (69)
  • 1.078 in (2)
  • 1.103 in (2)
  • 1.125 in (6)
  • 1.129 in (2)
  • 1.131 in (3)
  • 1.17 in (4)
  • 1.181 in (19)
  • 1.25 in (184)
  • 1.252 in (6)
  • 1.26 in (249)
  • 1.27 in (6)
  • 1.321 in (2)
  • 1.353 in (2)
  • 1.379 in (39)
  • 1.496 in (18)
  • 1.5 in (78)
  • 1.502 in (4)
  • 1.512 in (2)
  • 1.52 in (2)
  • 1.575 in (34)
  • 1.594 in (8)
  • 1.693 in (39)
  • 1.821 in (3)
  • 1.891 in (9)
  • 1.969 in (10)
  • 2.0 in (42)
  • 2.087 in (23)
  • 2.323 in (2)
  • 2.5 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (1)
  • 40.0 mm (4)
  • 44.0 mm (12)
  • 50.0 mm (32)
  • 54.0 mm (30)
  • 60.0 mm (2)
  • 63.0 mm (16)
  • 70.0 mm (38)
  • 74.0 mm (4)
  • 80.0 mm (51)
  • 86.0 mm (68)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (37)
  • 104.0 mm (2)
  • 106.0 mm (32)
  • 118.0 mm (2)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 150.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (1)
  • 1.575 in (4)
  • 1.732 in (12)
  • 1.969 in (32)
  • 2.126 in (30)
  • 2.362 in (2)
  • 2.48 in (16)
  • 2.757 in (38)
  • 2.914 in (4)
  • 3.15 in (51)
  • 3.386 in (68)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.938 in (37)
  • 4.094 in (2)
  • 4.173 in (32)
  • 4.646 in (2)
  • 4.724 in (2)
  • 5.118 in (2)
  • 5.906 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (290)
  • E (230)
  • S (1062)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (862)
  • DOUBLE POSITIVE (36)
  • NEGATIVE-ZERO (156)
  • NEUTRAL (ZERO) (397)
  • POSITIVE-ZERO (65)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (20)
  • 1.575 in (65)
  • 1.772 in (16)
  • 1.891 in (1)
  • 1.969 in (90)
  • 2.165 in (1)
  • 2.362 in (103)
  • 2.757 in (40)
  • 4.529 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (20)
  • 40.0 mm (65)
  • 45.0 mm (16)
  • 48.0 mm (1)
  • 50.0 mm (90)
  • 55.0 mm (1)
  • 60.0 mm (103)
  • 70.0 mm (40)
  • 115.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (13)
Front-End
Clamp Style
Clamp Style
  • C (166)
  • D (261)
  • M (711)
  • N (35)
  • P (306)
  • S (408)
  • W (8)
  • X (15)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (494)
  • D-DIAMOND/RHOMBIC 55 (383)
  • E-DIAMOND/RHOMBIC 75 (1)
  • R-ROUND (161)
  • S-SQUARE 90 (321)
  • T-TRIANGLE 60 (260)
  • V-DIAMOND/RHOMBIC 35 (192)
  • W-TRIGON 80 (98)