successfully added to cart
View Cart

Notifications

Mark all as read

Railroad Turning

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (166)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (165)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (166)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (166)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (165)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (165)
  • M Stainless Steel (27)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (27)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (27)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (27)
  • K Cast Iron (160)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (155)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (160)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (160)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (19)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (19)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (19)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (26)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (26)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (26)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (26)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (21)
    • H1
      Hardened Materials 44-48 HRC
      (21)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (20)
Select First Choice
  • IN (3)
Applications
Applications
  • CRT Profiling CRT Profiling (6)
  • Facing Facing (29)
  • ID Facing ID Facing (10)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (31)
  • Profiling Profiling (14)
  • Turning Turning (29)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (26)
  • Interrupted (10)
  • Lightly Interrupted Cut (43)
  • Smooth Cut (54)
  • Varying Depth of Cut (36)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (4)
  • 90.0 (24)
  • 93.0 (4)
  • 95.0 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (2)
  • Toolholder (28)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (59)
  • 2.0 (26)
  • 3.0 (1)
  • 4.0 (54)
  • 6.0 (22)
  • 8.0 (33)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.031 in (8)
  • 0.0313 in (23)
  • 0.0469 in (31)
  • 0.047 in (10)
  • 0.0625 in (27)
  • 0.063 in (10)
  • 0.0938 in (30)
  • 0.094 in (12)
  • 0.125 in (4)
  • 0.126 in (2)
  • 0.1563 in (1)
  • 0.157 in (10)
  • 0.1575 in (23)
  • 0.1875 in (5)
  • 0.196 in (8)
  • 0.1969 in (15)
  • 0.197 in (8)
  • 0.236 in (19)
  • 0.2362 in (8)
  • 0.3115 in (2)
  • 0.3125 in (3)
  • 0.315 in (7)
  • 0.375 in (2)
  • 0.3935 in (9)
  • 0.3937 in (5)
  • 0.492 in (8)
  • 0.4922 in (9)
  • 0.5 in (2)
  • 0.6299 in (7)
  • 0.63 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.794 mm (4)
  • 0.8 mm (19)
  • 1.191 mm (5)
  • 1.2 mm (28)
  • 1.588 mm (11)
  • 1.6 mm (26)
  • 2.4 mm (30)
  • 3.18 mm (1)
  • 3.2 mm (5)
  • 3.97 mm (1)
  • 4.0 mm (27)
  • 4.763 mm (5)
  • 5.0 mm (25)
  • 6.0 mm (22)
  • 7.912 mm (2)
  • 7.94 mm (3)
  • 8.0 mm (7)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 12.5 mm (15)
  • 12.7 mm (2)
  • 16.0 mm (8)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (145)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (145)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (3)
  • Lightly Interrupted Cut (20)
  • Smooth Cut (31)
  • Varying Depth of Cut (13)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (16)
  • CL4 (16)
  • CM3 (23)
  • CM5 (12)
  • CPX (17)
  • GX (14)
  • K090 (10)
  • K1 (10)
  • K10M (10)
  • K10P (8)
  • K20K (10)
  • K21 (10)
  • K25P (10)
  • K313 (18)
  • K40 (11)
  • K420 (16)
  • K68 (19)
  • KC210 (10)
  • KC250 (10)
  • KC5010 (21)
  • KC5025 (17)
  • KC5410 (14)
  • KC5510 (10)
  • KC725M (17)
  • KC730 (18)
  • KC7310 (10)
  • KC735M (15)
  • KC8050 (25)
  • KC810 (18)
  • KC850 (22)
  • KC9010 (12)
  • KC9025 (15)
  • KC910 (14)
  • KC9105 (8)
  • KC9110 (37)
  • KC9120 (13)
  • KC9125 (38)
  • KC9140 (12)
  • KC9145 (10)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (22)
  • KC9240NEW (22)
  • KC9245 (10)
  • KC9315 (31)
  • KC9320 (13)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (11)
  • KC990 (10)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (16)
  • KCK15B (22)
  • KCK20 (23)
  • KCK20B (18)
  • KCM15 (10)
  • KCM15B (8)
  • KCM25 (20)
  • KCM25B (15)
  • KCM35 (10)
  • KCM35B (10)
  • KCP10 (62)
  • KCP10B (48)
  • KCP25 (83)
  • KCP25B (56)
  • KCP30 (27)
  • KCP30B (19)
  • KCP40 (12)
  • KCP40B (12)
  • KCPK05 (25)
  • KCPK30 (15)
  • KCS10 (12)
  • KCS10B (17)
  • KCU10 (21)
  • KCU25 (21)
  • KT175 (7)
  • KU30T (10)
  • KY1320 (8)
  • KY1540 (8)
  • KY1615 (20)
  • KY2000 (8)
  • KY3000 (10)
  • KY3400 (10)
  • KY3500 (10)
  • KY4300 (8)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (8)
  • KYK35 (10)
  • KYS25 (8)
  • KYS30 (8)
  • MC2 (7)
  • NL250 (13)
  • NL300 (13)
  • NL400 (10)
  • SP0819 (10)
  • SP3019 (10)
  • SP4019 (8)
  • SPADAP (10)
Hand Of Tool
Hand Of Tool
  • L (10)
  • N (9)
  • R (11)
Wiper Insert
Wiper Insert
  • N (166)
  • Y (9)
Cutting Direction
Cutting Direction
  • B (8)
  • E (8)
  • S (14)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (13)
  • NEUTRAL (ZERO) (15)
Front-End
Adapter Front-End
Adapter Front-End
  • KM MODULAR ADAPTER (5)
Clamp Style
Clamp Style
  • M (6)
  • P (9)
  • X (25)
Front End Type
Front End Type
  • KMT - KM Adapter (5)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • L-RECTANGLE 90 (16)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (55)
  • S-SQUARE 90 (37)
  • T-TRIANGLE 60 (23)
Cartridge Size
Cartridge Size
  • 32 (10)
Front End Style
Front End Style
  • KMT00 All KM, except 02,05,09 (5)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.6299 in (1)
  • 0.9449 in (2)
  • 1.2598 in (1)
  • 1.2992 in (1)
  • 1.5807 in (2)
  • 3.0709 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (1)
  • 24.0 mm (2)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 40.15 mm (2)
  • 78.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.7874 in (1)
  • 1.1810 in (1)
  • 1.5750 in (1)
  • 1.9685 in (1)
  • 2.2050 in (1)
Gage Length
Gage Length
  • 20.0000 mm (1)
  • 30.0000 mm (1)
  • 40.0000 mm (1)
  • 50.0000 mm (1)
  • 56.0000 mm (1)
Front End Size
Front End Size
  • 1.2598 in (1)
  • 1.9685 in (1)
  • 2.4803 in (1)
  • 3.1496 in (1)
  • 3.937 in (1)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 32.0 mm (1)
  • 50.0 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
Front End Size Min to Front End Size Max
Insert Geometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (18)
  • L-RECTANGLE 90 (7)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (38)
  • S-SQUARE 90 (33)
  • T-TRIANGLE 60 (23)
Insert IC Size
Insert IC Size
  • 9.525 mm (11)
  • 12.0 mm (3)
  • 12.7 mm (18)
  • 15.824 mm (2)
  • 15.875 mm (14)
  • 16.0 mm (4)
  • 19.05 mm (20)
  • 20.0 mm (6)
  • 25.0 mm (11)
  • 25.4 mm (16)
  • 32.0 mm (8)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.075 in (1)
  • 0.375 in (11)
  • 0.4724 in (3)
  • 0.5 in (18)
  • 0.623 in (2)
  • 0.625 in (14)
  • 0.63 in (4)
  • 0.75 in (19)
  • 0.787 in (5)
  • 0.7874 in (1)
  • 0.984 in (6)
  • 0.9844 in (5)
  • 1.0 in (16)
  • 1.2598 in (7)
  • 1.26 in (1)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.579 mm (1)
  • 9.525 mm (1)
  • 12.7 mm (6)
  • 12.896 mm (4)
  • 13.66 mm (2)
  • 13.72 mm (2)
  • 15.875 mm (5)
  • 16.12 mm (3)
  • 16.498 mm (6)
  • 16.5 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (12)
  • 19.344 mm (7)
  • 22.0 mm (8)
  • 22.91 mm (2)
  • 25.4 mm (10)
  • 25.792 mm (4)
  • 27.496 mm (5)
  • 30.0 mm (4)
  • 31.75 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.259 in (1)
  • 0.375 in (1)
  • 0.5 in (6)
  • 0.5077 in (4)
  • 0.538 in (2)
  • 0.54 in (2)
  • 0.625 in (5)
  • 0.6346 in (3)
  • 0.6495 in (6)
  • 0.6496 in (4)
  • 0.748 in (9)
  • 0.75 in (12)
  • 0.7616 in (7)
  • 0.866 in (2)
  • 0.8661 in (6)
  • 0.902 in (2)
  • 1.0 in (10)
  • 1.0154 in (4)
  • 1.0825 in (5)
  • 1.1811 in (4)
  • 1.25 in (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 52 (2)
  • 75 (1)
  • 76 (2)
  • 80 (1)
  • RH (12)
  • RM (35)
  • RN (16)
  • RP (14)
  • RRF (4)
  • RRH (5)
  • RRP (8)
  • RRSM (3)
  • RU (2)
  • S-WT5 (2)
  • UP (6)
  • UPG (18)
Cutting Tool Material
Cutting Tool Material
  • C A (22)
  • C N (10)
  • H T (12)
  • H W (175)
Tolerance Class
Tolerance Class
  • G (1)
  • M (108)
  • U (20)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (28)
  • TAPER SHANK (2)
System Size
System Size
  • KM80TS (2)
Back-End Diameter
Back-End Diameter
  • 80.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.1496 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart