U.S customers, a 5% tariff surcharge will be added to your order for metal cutting products.
Positive Style Inserts • Kendex™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (163)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(163)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(159)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(159)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(159)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(159)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(159)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(163)
- M Stainless Steel (136)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(136)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(136)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(136)
- K Cast Iron (70)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(41)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(67)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(70)
- N Non-Ferrous Materials (47)
- N1Wrought Aluminum (19)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N7MMC's (12)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N6Carbon, Graphite Composites, CFRP (7)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (47)
- S High-Temp Alloys (218)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(195)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(218)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(195)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(145)
- H Hardened Materials (33)
- H2Hardened Materials 48-55 HRC(33)
- H4Hardened Materials >60 HRC(3)
- H1Hardened Materials 44-48 HRC(33)
- H3Hardened Materials 56-60 HRC(33)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (111)
- 2.0 (9)
- 3.0 (137)
- 4.0 (72)
- 16.0 (2)
to
Corner Radius
Corner Radius
- 0.004 in(1)
- 0.008 in(6)
- 0.016 in(66)
- 0.031 in(101)
- 0.047 in(35)
- 0.063 in(16)
- 0.094 in(2)
- 0.125 in(18)
- 0.157 in(2)
- 0.188 in(33)
- 0.25 in(42)
- 0.313 in(4)
- 0.375 in(3)
- 0.5 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(1)
- 0.2 mm(6)
- 0.4 mm(66)
- 0.8 mm(101)
- 1.2 mm(35)
- 1.6 mm(16)
- 2.375 mm(2)
- 3.175 mm(18)
- 4.0 mm(2)
- 4.775 mm(33)
- 6.35 mm(42)
- 7.95 mm(4)
- 9.525 mm(3)
- 12.7 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (12)
- K68 (22)
- KB1630 (3)
- KBK45 (3)
- KC5010 (26)
- KC725M (7)
- KC730 (22)
- KC850 (32)
- KCK15 (1)
- KCK15B (4)
- KCK20B (3)
- KCP25B (9)
- KCP25C (32)
- KCPK30 (1)
- KCS10 (8)
- KCS10B (10)
- KCU10 (16)
- KCU10B (31)
- KD1425 (6)
- KY1540 (9)
- KY1615 (2)
- KY3500 (5)
- KY4300 (14)
- KY4400 (5)
- KYHK15B (23)
- KYS25 (8)
- KYS30 (16)
- KYSP30 (3)
Wiper Insert
Wiper Insert
- N (329)
- Y (2)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (11)
- R-ROUND (104)
- S-SQUARE 90 (75)
- T-TRIANGLE 60 (143)
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (11)
- R-ROUND (104)
- S-SQUARE 90 (75)
- T-TRIANGLE 60 (143)
Insert IC Size
Insert IC Size
- 4.775 mm(2)
- 6.35 mm(44)
- 9.525 mm(119)
- 12.7 mm(134)
- 15.875 mm(11)
- 19.05 mm(19)
- 25.4 mm(2)
to
Insert IC Size
Insert IC Size
- 0.188 in(2)
- 0.25 in(44)
- 0.375 in(119)
- 0.5 in(134)
- 0.625 in(11)
- 0.75 in(19)
- 1.0 in(2)
to
Cutting Edge Length
Cutting Edge Length
- 9.525 mm(18)
- 10.999 mm(7)
- 11.0 mm(19)
- 12.7 mm(37)
- 12.896 mm(11)
- 13.891 mm(5)
- 15.875 mm(3)
- 16.498 mm(30)
- 16.5 mm(33)
- 19.05 mm(16)
- 21.997 mm(10)
- 22.0 mm(34)
- 27.496 mm(4)
to
Cutting Edge Length
Cutting Edge Length
- 0.375 in(18)
- 0.433 in(5)
- 0.4331 in(21)
- 0.5 in(37)
- 0.5077 in(11)
- 0.5469 in(5)
- 0.625 in(3)
- 0.6495 in(30)
- 0.6496 in(33)
- 0.75 in(16)
- 0.866 in(25)
- 0.8661 in(19)
- 1.0825 in(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- CB (1)
- CC (1)
- FW (1)
- K (20)
- MP (20)
Cutting Tool Material
Cutting Tool Material
- B H (3)
- C A (20)
- C N (65)
- D P (6)
- H W (239)
Tolerance Class
Tolerance Class
- G (286)
- M (15)
- U (30)
No filters matching ""
