Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Kenclamp™ • D-Style Clamping • For Negative Style Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (263)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (263)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (263)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (263)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (263)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (263)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (263)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (263)
  • M Stainless Steel (263)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (263)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (263)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (263)
  • K Cast Iron (263)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (263)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (263)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (263)
  • N Non-Ferrous Materials (261)
    • N1
      Wrought Aluminum
      (258)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (258)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (129)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (261)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (258)
    • N6
      Carbon, Graphite Composites, CFRP
      (234)
    • N7
      MMC's
      (258)
  • S High-Temp Alloys (263)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (263)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (263)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (263)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (263)
  • H Hardened Materials (238)
    • H1
      Hardened Materials 44-48 HRC
      (238)
    • H2
      Hardened Materials 48-55 HRC
      (238)
    • H3
      Hardened Materials 56-60 HRC
      (238)
    • H4
      Hardened Materials >60 HRC
      (199)
Select First Choice
  • CN (44)
  • DE (44)
  • GB (15)
  • SG (6)
  • US (59)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (144)
  • Multiple Direction Cutting Multiple Direction Cutting (210)
  • Profiling Profiling (156)
  • TRN Boring TRN Boring (55)
  • Turning Turning (213)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (263)
  • Interrupted (213)
  • Lightly Interrupted Cut (263)
  • Smooth Cut (263)
  • Varying Depth of Cut (263)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (25)
  • 62.5 (1)
  • 63.0 (2)
  • 72.5 (6)
  • 75.0 (38)
  • 90.0 (12)
  • 93.0 (73)
  • 95.0 (75)
  • 107.5 (19)
  • 117.5 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (47)
  • Toolholder (160)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (135)
  • 2.0 (180)
  • 3.0 (32)
  • 4.0 (219)
  • 6.0 (41)
  • 8.0 (141)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (175)
  • 0.008 in (146)
  • 0.014 in (30)
  • 0.016 in (246)
  • 0.024 in (18)
  • 0.031 in (259)
  • 0.047 in (259)
  • 0.062 in (44)
  • 0.063 in (207)
  • 0.094 in (49)
  • 0.095 in (80)
  • 0.125 in (13)
  • 0.126 in (32)
  • 0.157 in (2)
  • 0.25 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (175)
  • 0.2 mm (146)
  • 0.351 mm (30)
  • 0.4 mm (246)
  • 0.601 mm (18)
  • 0.8 mm (259)
  • 1.201 mm (259)
  • 1.576 mm (44)
  • 1.6 mm (207)
  • 2.375 mm (49)
  • 2.401 mm (80)
  • 3.176 mm (13)
  • 3.2 mm (32)
  • 4.0 mm (2)
  • 6.351 mm (3)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (213)
  • CM2 (206)
  • CPX (184)
  • K090 (223)
  • K10M (242)
  • K10P (241)
  • K10U (209)
  • K15U (209)
  • K20K (246)
  • K25M (243)
  • K25P (219)
  • K313 (258)
  • K420 (187)
  • K45 (158)
  • K68 (223)
  • KB1610 (163)
  • KB9610 (193)
  • KBH10 (193)
  • KBH20 (193)
  • KC210 (167)
  • KC5010 (263)
  • KC5025 (257)
  • KC5410 (234)
  • KC5510 (254)
  • KC720 (198)
  • KC730 (228)
  • KC7310 (258)
  • KC732 (195)
  • KC8050 (263)
  • KC810 (252)
  • KC850 (254)
  • KC9010 (255)
  • KC9025 (263)
  • KC910 (241)
  • KC9105 (252)
  • KC9110 (263)
  • KC9120 (254)
  • KC9125 (263)
  • KC9140 (263)
  • KC9145 (240)
  • KC9215 (255)
  • KC9225 (255)
  • KC9240 (256)
  • KC9240NEW (256)
  • KC9245 (255)
  • KC9315 (258)
  • KC9320 (260)
  • KC9325 (257)
  • KC935 (262)
  • KC950 (242)
  • KC990 (263)
  • KCK05 (258)
  • KCK05B (244)
  • KCK15 (257)
  • KCK15B (258)
  • KCK20 (257)
  • KCK20B (257)
  • KCM15 (255)
  • KCM15B (253)
  • KCM25 (256)
  • KCM25B (255)
  • KCM35 (243)
  • KCM35B (167)
  • KCP05 (242)
  • KCP05B (214)
  • KCP10 (263)
  • KCP10B (263)
  • KCP25 (263)
  • KCP25B (262)
  • KCP25C (255)
  • KCP30 (263)
  • KCP30B (213)
  • KCP40 (207)
  • KCP40B (217)
  • KCPK05 (244)
  • KCS10B (234)
  • KCU10 (262)
  • KCU25 (257)
  • KD050 (158)
  • KD081 (158)
  • KD120 (161)
  • KT125 (188)
  • KT175 (191)
  • KT315 (227)
  • KU10T (226)
  • KU30T (261)
  • KY1320 (232)
  • KY1615 (220)
  • KY3000 (217)
  • KY3400 (176)
  • KY3500 (234)
  • KY4400 (234)
  • KYHK15B (237)
  • KYK25 (174)
  • KYK35 (234)
  • NL250 (246)
  • NL920 (213)
  • SP0819 (166)
  • SP3019 (202)
  • SP4019 (179)
Hand Of Tool
Hand Of Tool
  • L (84)
  • N (19)
  • R (104)
Wiper Insert
Wiper Insert
  • N (263)
  • Y (191)
F Dimension
F Dimension
  • 0.0 mm (3)
  • 9.425 mm (1)
  • 9.525 mm (1)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.601 mm (3)
  • 12.625 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (2)
  • 19.5 mm (1)
  • 22.3 mm (1)
  • 23.151 mm (2)
  • 24.0 mm (4)
  • 25.0 mm (11)
  • 25.401 mm (12)
  • 27.0 mm (15)
  • 28.651 mm (2)
  • 28.701 mm (1)
  • 30.0 mm (4)
  • 31.75 mm (49)
  • 32.0 mm (33)
  • 35.0 mm (8)
  • 38.0 mm (4)
  • 38.1 mm (15)
  • 38.125 mm (1)
  • 40.0 mm (5)
  • 43.0 mm (10)
  • 50.0 mm (1)
  • 50.801 mm (5)
  • 53.0 mm (3)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (3)
  • 0.371 in (1)
  • 0.375 in (1)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.496 in (3)
  • 0.497 in (1)
  • 0.5 in (1)
  • 0.512 in (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.768 in (1)
  • 0.878 in (1)
  • 0.911 in (2)
  • 0.946 in (4)
  • 0.984 in (11)
  • 1.0 in (12)
  • 1.063 in (15)
  • 1.129 in (2)
  • 1.131 in (1)
  • 1.181 in (4)
  • 1.25 in (49)
  • 1.26 in (33)
  • 1.379 in (8)
  • 1.496 in (4)
  • 1.5 in (15)
  • 1.502 in (1)
  • 1.575 in (5)
  • 1.693 in (10)
  • 1.969 in (1)
  • 2.0 in (5)
  • 2.087 in (3)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 54.0 mm (8)
  • 70.0 mm (7)
  • 80.0 mm (8)
  • 86.0 mm (26)
  • 106.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.126 in (8)
  • 2.757 in (7)
  • 3.15 in (8)
  • 3.386 in (26)
  • 4.173 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (56)
  • E (31)
  • S (120)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (176)
  • NEGATIVE-ZERO (31)
Maximum Bore Depth
Maximum Bore Depth
  • 1.772 in (16)
  • 1.969 in (14)
  • 2.165 in (1)
  • 2.362 in (18)
  • 2.757 in (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 45.0 mm (16)
  • 50.0 mm (14)
  • 55.0 mm (1)
  • 60.0 mm (18)
  • 70.0 mm (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Clamp Style
Clamp Style
  • D (261)
  • M (2)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (70)
  • D-DIAMOND/RHOMBIC 55 (74)
  • R-ROUND (3)
  • S-SQUARE 90 (41)
  • T-TRIANGLE 60 (14)
  • V-DIAMOND/RHOMBIC 35 (34)
  • W-TRIGON 80 (27)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (193)
  • B L (206)
  • C A (241)
  • C N (238)
  • D P (159)
  • H T (230)
  • H W (263)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (160)
  • TAPER SHANK (47)
System Size
System Size
  • KM40TS (17)
  • KM50TS (12)
  • KM63TS (14)
  • KM63UT (1)
  • KM80TS (3)
Back-End Diameter
Back-End Diameter
  • 40.0 mm (33)
  • 50.0 mm (29)
  • 63.0 mm (32)
  • 80.0 mm (9)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.575 in (33)
  • 1.969 in (29)
  • 2.48 in (32)
  • 3.15 in (9)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.75 in (15)
  • 0.787 in (16)
  • 0.984 in (29)
  • 1.0 in (53)
  • 1.25 in (25)
  • 1.26 in (15)
  • 1.5 in (5)
  • 1.575 in (2)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 19.05 mm (15)
  • 20.0 mm (16)
  • 25.0 mm (29)
  • 25.401 mm (53)
  • 31.75 mm (25)
  • 32.0 mm (15)
  • 38.1 mm (5)
  • 40.0 mm (2)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.75 in (15)
  • 0.787 in (16)
  • 0.984 in (38)
  • 1.0 in (58)
  • 1.25 in (20)
  • 1.26 in (6)
  • 1.5 in (5)
  • 1.575 in (2)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 19.05 mm (15)
  • 20.0 mm (16)
  • 25.0 mm (38)
  • 25.401 mm (58)
  • 31.75 mm (20)
  • 32.0 mm (6)
  • 38.1 mm (5)
  • 40.0 mm (2)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Kenclamp™ Toolholders

Kenloc™ Inserts
(11 Products)
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B3] Head Back Offset [B3] Head Back Offset Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
2273046 DWLNL123BKC3 DWLNL123BKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 25.4000 1.000 7.1000 .2800 WN..332 9 IP 15 IP 15 IP
    List price:
    $102,48 /each.
    Your price::
    Qty
    1875155 DWLNL164CKC3 DWLNL164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 25.4000 1.000 3.8000 .1500 WN..432 15 IP 15 IP 15 IP
      List price:
      $113,84 /each.
      Your price::
      Qty
      1875172 DWLNL204DKC3 DWLNL204DKC3   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 25.4000 1.000     WN..432 15 IP 15 IP 15 IP
        List price:
        $128,96 /each.
        Your price::
        Qty
        2273045 DWLNR123BKC3 DWLNR123BKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 25.4000 1.000 7.1000 .2800 WN..332 9 IP 15 IP 15 IP
          List price:
          $103,32 /each.
          Your price::
          Qty
          1875144 DWLNR164CKC3 DWLNR164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 25.4000 1.000 3.8000 .1500 WN..432 15 IP 15 IP 15 IP
            List price:
            $113,61 /each.
            Your price::
            Qty
            1875166 DWLNR204DKC3 DWLNR204DKC3   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 25.4000 1.000     WN..432 15 IP 15 IP 15 IP
              List price:
              $128,96 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Kenclamp™ Toolholders

              Kenloc™ Inserts
              (8 Products)
              • TurningTurning
              • ProfilingProfiling
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
              2503997 DVJNL123CKC3 DVJNL123CKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 127.0000 5.000 46.2300 1.820 VN..332 9 IP 15 IP 15 IP
                List price:
                $147,16 /each.
                Your price::
                Qty
                2503999 DVJNL163DKC3 DVJNL163DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 46.2300 1.820 VN..332 9 IP 15 IP 15 IP
                  List price:
                  $149,70 /each.
                  Your price::
                  Qty
                  2503996 DVJNR123CKC3 DVJNR123CKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 127.0000 5.000 46.2300 1.820 VN..332 9 IP 15 IP 15 IP
                    List price:
                    $147,16 /each.
                    Your price::
                    Qty
                    2503998 DVJNR163DKC3 DVJNR163DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 46.2300 1.820 VN..332 9 IP 15 IP 15 IP
                      List price:
                      $149,70 /each.
                      Your price::
                      Qty
                      2504002 DVJNR164DKC3 DVJNR164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 54.6100 2.150 VN..432 15 IP 15 IP 15 IP
                        List price:
                        $149,92 /each.
                        Your price::
                        Qty
                        2504000 DVJNR853DKC3 DVJNR853DKC3   31.7500 1.250 25.4000 1.000 31.7500 1.250 152.4000 6.000 46.2300 1.820 VN..332 9 IP 15 IP 15 IP
                          List price:
                          $151,91 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Kenclamp™ Toolholders

                          Kenloc™ Inserts
                          (4 Products)
                          • TurningTurning
                          • ProfilingProfiling
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
                          2273072 DSDNN124KC3 DSDNN124KC3   19.0500 .7500 19.0500 .7500 9.5200 .3750 114.3000 4.500 36.5800 1.440 SN..432 15 IP 15 IP 15 IP
                            List price:
                            $102,48 /each.
                            Your price::
                            Qty
                            1908834 DSDNN164KC3 DSDNN164KC3   25.4000 1.000 25.4000 1.000 12.7000 .5000 152.4000 6.000 36.5800 1.440 SN..432 15 IP 15 IP 15 IP
                              List price:
                              $114,03 /each.
                              Your price::
                              Qty
                              1908835 DSDNN204KC3 DSDNN204KC3   31.7500 1.250 31.7500 1.250 15.8800 .6250 152.4000 6.000 36.5800 1.440 SN..432 15 IP 15 IP 15 IP
                                List price:
                                $147,29 /each.
                                Your price::
                                Qty
                                2273024 DSDNN206KC4 DSDNN206KC4   31.7500 1.250 31.7500 1.250 15.8800 .6250 152.4000 6.000 44.4500 1.750 SN..643 25 IP 25 IP 25 IP
                                  List price:
                                  $142,39 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is no longer available
                                  Replacement Product Please contact customer service for assistance
                                  Qty

                                  Sold in pkg. of

                                  ORIGINAL PRODUCT

                                  Kenclamp™ Toolholders

                                  Kenloc™ Inserts
                                  (23 Products)
                                  • TurningTurning
                                  • ProfilingProfiling
                                  • FacingFacing
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B3] Head Back Offset [B3] Head Back Offset Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                  1875173 DCLNL165CKC4 DCLNL165CKC4   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 35.0500 1.380     CN..543 15 IP 15 IP 15 IP
                                    List price:
                                    $113,61 /each.
                                    Your price::
                                    Qty
                                    2273011 DCLNL206DKC4 DCLNL206DKC4   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 41.2800 1.625     CN..643 25 IP 25 IP 25 IP
                                      List price:
                                      $123,73 /each.
                                      Your price::
                                      Qty
                                      1875137 DCLNR124BKC3 DCLNR124BKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.7500 1.250 3.8100 .1500 CN..432 15 IP 15 IP 15 IP
                                        List price:
                                        $107,19 /each.
                                        Your price::
                                        Qty
                                        1875134 DCLNR164CKC3 DCLNR164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
                                          List price:
                                          $113,41 /each.
                                          Your price::
                                          Qty
                                          1874862 DCLNR164DKC3 DCLNR164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP