Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

Internal Machining

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1375)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1374)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1374)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1374)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1374)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1374)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1375)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1375)
  • M Stainless Steel (1375)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1375)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1375)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1375)
  • K Cast Iron (1371)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1371)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1369)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1369)
  • N Non-Ferrous Materials (1297)
    • N1
      Wrought Aluminum
      (1287)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1286)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1042)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1296)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1286)
    • N6
      Carbon, Graphite Composites, CFRP
      (1192)
    • N7
      MMC's
      (1286)
  • S High-Temp Alloys (1383)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1381)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1381)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1381)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1374)
  • H Hardened Materials (1143)
    • H1
      Hardened Materials 44-48 HRC
      (1143)
    • H2
      Hardened Materials 48-55 HRC
      (1136)
    • H3
      Hardened Materials 56-60 HRC
      (1136)
    • H4
      Hardened Materials >60 HRC
      (1012)
Select First Choice
  • BR (2)
  • CN (78)
  • DE (75)
  • GB (41)
  • IN (1)
  • SG (9)
  • US (71)
Applications
Applications
  • Back Boring Back Boring (87)
  • CRT Profiling CRT Profiling (55)
  • Chamfer Turning Chamfer Turning (82)
  • Facing Facing (271)
  • ID Facing ID Facing (197)
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (1116)
  • Profiling Profiling (882)
  • TRN Boring TRN Boring (1029)
  • Threading Threading (1)
  • Turning Turning (189)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1240)
  • Interrupted (566)
  • Lightly Interrupted Cut (1350)
  • Smooth Cut (1366)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (1342)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (21)
  • 60.0 (14)
  • 62.5 (13)
  • 75.0 (48)
  • 85.0 (7)
  • 90.0 (247)
  • 90.25 (10)
  • 91.0 (2)
  • 93.0 (315)
  • 95.0 (659)
  • 97.0 (8)
  • 107.5 (50)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (206)
  • Boring Bar Shank (850)
  • KM (220)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (977)
  • 2.0 (902)
  • 3.0 (314)
  • 4.0 (653)
  • 6.0 (122)
  • 8.0 (286)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (28)
  • 0.001 in (54)
  • 0.002 in (271)
  • 0.003 in (14)
  • 0.004 in (919)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (112)
  • 0.008 in (1037)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (10)
  • 0.014 in (48)
  • 0.015 in (102)
  • 0.016 in (1215)
  • 0.017 in (10)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.024 in (58)
  • 0.027 in (1)
  • 0.028 in (9)
  • 0.031 in (1244)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (13)
  • 0.047 in (925)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (203)
  • 0.063 in (618)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (138)
  • 0.095 in (162)
  • 0.098 in (2)
  • 0.119 in (1)
  • 0.125 in (18)
  • 0.126 in (70)
  • 0.157 in (6)
  • 0.197 in (1)
  • 0.25 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (28)
  • 0.025 mm (54)
  • 0.05 mm (271)
  • 0.076 mm (14)
  • 0.1 mm (919)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (112)
  • 0.2 mm (1037)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (10)
  • 0.325 mm (10)
  • 0.351 mm (48)
  • 0.375 mm (102)
  • 0.4 mm (1215)
  • 0.426 mm (10)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.601 mm (58)
  • 0.65 mm (1)
  • 0.701 mm (9)
  • 0.775 mm (28)
  • 0.8 mm (1216)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (13)
  • 1.201 mm (925)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (203)
  • 1.6 mm (618)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (138)
  • 2.401 mm (162)
  • 2.5 mm (2)
  • 3.0 mm (1)
  • 3.176 mm (18)
  • 3.2 mm (70)
  • 4.0 mm (6)
  • 5.0 mm (1)
  • 6.351 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (120)
  • 0.65 mm (1)
  • 0.701 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (120)
  • 0.027 in (1)
  • 0.028 in (1)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K090 (577)
  • K10M (731)
  • K10P (666)
  • K10U (673)
  • K15U (664)
  • K20K (699)
  • K25M (658)
  • K25P (599)
  • K313 (1276)
  • K420 (592)
  • K68 (1104)
  • KB1610 (801)
  • KB1630 (600)
  • KB5610 (721)
  • KB5625 (703)
  • KB5630 (550)
  • KB9610 (859)
  • KBH10 (621)
  • KBH20 (705)
  • KC250 (572)
  • KC5010 (1367)
  • KC5025 (1297)
  • KC5410 (1064)
  • KC5510 (612)
  • KC720 (1065)
  • KC730 (1318)
  • KC7310 (769)
  • KC732 (1050)
  • KC8050 (1192)
  • KC810 (1179)
  • KC850 (1236)
  • KC9010 (1033)
  • KC9025 (1227)
  • KC910 (1159)
  • KC9105 (1058)
  • KC9110 (1225)
  • KC9120 (1040)
  • KC9125 (1171)
  • KC9140 (643)
  • KC9215 (630)
  • KC9225 (1155)
  • KC9240 (1135)
  • KC9240NEW (1124)
  • KC9245 (622)
  • KC9315 (1201)
  • KC9320 (1093)
  • KC9325 (994)
  • KC935 (1330)
  • KC950 (1064)
  • KC990 (1131)
  • KCD25 (582)
  • KCK05 (1149)
  • KCK05B (764)
  • KCK15 (1022)
  • KCK15B (1094)
  • KCK20 (1143)
  • KCK20B (1110)
  • KCM15 (1125)
  • KCM15B (932)
  • KCM25 (1159)
  • KCM25B (1052)
  • KCM35 (863)
  • KCP05 (1085)
  • KCP05B (561)
  • KCP10 (1171)
  • KCP10B (1179)
  • KCP25 (1186)
  • KCP25B (1206)
  • KCP25C (788)
  • KCP30 (1075)
  • KCP30B (588)
  • KCP40B (608)
  • KCPK05 (678)
  • KCS10 (740)
  • KCS10B (1031)
  • KCU10 (1321)
  • KCU25 (1253)
  • KD050 (714)
  • KD081 (624)
  • KD100 (740)
  • KD120 (646)
  • KD1400 (960)
  • KD1405 (609)
  • KD1425 (1009)
  • KT125 (653)
  • KT150 (583)
  • KT175 (930)
  • KT315 (1209)
  • KTP10 (572)
  • KU10T (1035)
  • KU30T (1073)
  • KY1320 (568)
  • KY1615 (572)
  • KY3500 (602)
  • KY4400 (598)
  • KYHK15B (617)
  • KYK35 (597)
  • NL250 (593)
  • NL920 (568)
  • SP4019 (601)
Hand Of Tool
Hand Of Tool
  • L (490)
  • R (786)
Wiper Insert
Wiper Insert
  • N (1263)
  • Y (794)
F Dimension
F Dimension
  • 2.401 mm (8)
  • 2.651 mm (13)
  • 2.825 mm (3)
  • 2.95 mm (9)
  • 2.975 mm (4)
  • 3.026 mm (6)
  • 3.1 mm (3)
  • 3.125 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (5)
  • 3.426 mm (3)
  • 3.6 mm (1)
  • 3.625 mm (1)
  • 3.676 mm (12)
  • 3.7 mm (4)
  • 3.725 mm (7)
  • 3.801 mm (1)
  • 3.85 mm (4)
  • 3.95 mm (11)
  • 4.425 mm (4)
  • 4.7 mm (7)
  • 4.75 mm (4)
  • 4.801 mm (4)
  • 5.351 mm (1)
  • 5.426 mm (1)
  • 5.45 mm (2)
  • 5.551 mm (3)
  • 5.575 mm (6)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 5.875 mm (4)
  • 6.0 mm (10)
  • 6.351 mm (31)
  • 6.551 mm (2)
  • 6.601 mm (1)
  • 6.875 mm (5)
  • 6.926 mm (1)
  • 7.0 mm (26)
  • 7.525 mm (1)
  • 7.926 mm (38)
  • 8.875 mm (5)
  • 9.0 mm (42)
  • 9.525 mm (7)
  • 10.3 mm (43)
  • 10.326 mm (2)
  • 10.875 mm (4)
  • 11.0 mm (52)
  • 11.101 mm (10)
  • 12.701 mm (55)
  • 12.875 mm (5)
  • 13.0 mm (47)
  • 13.101 mm (1)
  • 14.275 mm (14)
  • 15.875 mm (3)
  • 16.25 mm (57)
  • 17.0 mm (131)
  • 18.276 mm (1)
  • 19.05 mm (22)
  • 19.425 mm (29)
  • 19.451 mm (1)
  • 21.875 mm (1)
  • 22.0 mm (108)
  • 22.475 mm (1)
  • 22.6 mm (46)
  • 23.0 mm (2)
  • 23.276 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (26)
  • 25.776 mm (13)
  • 27.0 mm (100)
  • 28.276 mm (1)
  • 28.576 mm (28)
  • 28.675 mm (1)
  • 30.0 mm (2)
  • 31.75 mm (6)
  • 32.4 mm (1)
  • 32.525 mm (32)
  • 32.551 mm (8)
  • 33.65 mm (9)
  • 34.801 mm (2)
  • 34.926 mm (5)
  • 35.0 mm (61)
  • 36.275 mm (1)
  • 36.676 mm (1)
  • 36.975 mm (1)
  • 38.875 mm (21)
  • 38.901 mm (5)
  • 44.45 mm (10)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.095 in (8)
  • 0.105 in (13)
  • 0.111 in (3)
  • 0.116 in (9)
  • 0.117 in (4)
  • 0.12 in (6)
  • 0.122 in (3)
  • 0.123 in (1)
  • 0.125 in (1)
  • 0.126 in (5)
  • 0.135 in (3)
  • 0.143 in (1)
  • 0.144 in (1)
  • 0.145 in (12)
  • 0.146 in (4)
  • 0.147 in (7)
  • 0.15 in (1)
  • 0.152 in (4)
  • 0.156 in (11)
  • 0.175 in (4)
  • 0.185 in (7)
  • 0.187 in (4)
  • 0.189 in (4)
  • 0.211 in (1)
  • 0.214 in (1)
  • 0.215 in (2)
  • 0.219 in (9)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.231 in (4)
  • 0.237 in (10)
  • 0.25 in (31)
  • 0.258 in (2)
  • 0.26 in (1)
  • 0.271 in (5)
  • 0.273 in (1)
  • 0.276 in (26)
  • 0.296 in (1)
  • 0.312 in (38)
  • 0.35 in (5)
  • 0.354 in (42)
  • 0.375 in (7)
  • 0.406 in (43)
  • 0.408 in (2)
  • 0.428 in (4)
  • 0.433 in (52)
  • 0.437 in (10)
  • 0.5 in (55)
  • 0.507 in (5)
  • 0.512 in (47)
  • 0.516 in (1)
  • 0.562 in (14)
  • 0.625 in (3)
  • 0.64 in (57)
  • 0.669 in (131)
  • 0.72 in (1)
  • 0.75 in (22)
  • 0.765 in (29)
  • 0.766 in (1)
  • 0.861 in (1)
  • 0.866 in (108)
  • 0.885 in (1)
  • 0.89 in (46)
  • 0.906 in (2)
  • 0.916 in (1)
  • 0.984 in (1)
  • 1.0 in (26)
  • 1.016 in (13)
  • 1.063 in (100)
  • 1.113 in (1)
  • 1.125 in (28)
  • 1.129 in (1)
  • 1.181 in (2)
  • 1.25 in (6)
  • 1.276 in (1)
  • 1.281 in (32)
  • 1.282 in (8)
  • 1.325 in (9)
  • 1.37 in (2)
  • 1.375 in (5)
  • 1.379 in (61)
  • 1.428 in (1)
  • 1.444 in (1)
  • 1.456 in (1)
  • 1.532 in (26)
  • 1.75 in (10)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.575 mm (8)
  • 5.176 mm (8)
  • 5.275 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (4)
  • 5.775 mm (3)
  • 5.801 mm (5)
  • 5.851 mm (1)
  • 5.95 mm (9)
  • 6.0 mm (1)
  • 6.176 mm (1)
  • 6.2 mm (1)
  • 6.601 mm (2)
  • 6.775 mm (3)
  • 6.9 mm (1)
  • 6.976 mm (3)
  • 7.051 mm (1)
  • 7.075 mm (1)
  • 7.101 mm (8)
  • 7.25 mm (14)
  • 7.426 mm (4)
  • 7.5 mm (1)
  • 7.525 mm (5)
  • 7.601 mm (1)
  • 7.625 mm (2)
  • 8.15 mm (3)
  • 8.8 mm (4)
  • 9.05 mm (6)
  • 9.1 mm (5)
  • 9.15 mm (3)
  • 9.201 mm (1)
  • 10.5 mm (1)
  • 10.55 mm (12)
  • 10.951 mm (1)
  • 11.0 mm (14)
  • 11.125 mm (1)
  • 12.201 mm (30)
  • 12.451 mm (1)
  • 12.9 mm (2)
  • 13.0 mm (31)
  • 13.675 mm (1)
  • 14.3 mm (1)
  • 15.25 mm (43)
  • 16.0 mm (47)
  • 16.5 mm (1)
  • 18.55 mm (10)
  • 19.55 mm (43)
  • 20.0 mm (58)
  • 21.375 mm (1)
  • 21.6 mm (10)
  • 23.625 mm (41)
  • 24.901 mm (16)
  • 25.0 mm (70)
  • 25.401 mm (2)
  • 26.151 mm (1)
  • 26.925 mm (1)
  • 27.0 mm (2)
  • 30.225 mm (3)
  • 30.475 mm (43)
  • 31.0 mm (10)
  • 32.0 mm (131)
  • 32.676 mm (2)
  • 33.0 mm (2)
  • 33.025 mm (22)
  • 33.275 mm (1)
  • 37.0 mm (3)
  • 37.35 mm (22)
  • 37.4 mm (3)
  • 39.375 mm (3)
  • 40.0 mm (135)
  • 41.276 mm (2)
  • 43.0 mm (1)
  • 43.301 mm (26)
  • 44.7 mm (37)
  • 44.95 mm (1)
  • 45.0 mm (2)
  • 45.975 mm (1)
  • 47.625 mm (2)
  • 48.0 mm (1)
  • 50.0 mm (135)
  • 50.801 mm (32)
  • 51.051 mm (13)
  • 52.0 mm (2)
  • 53.975 mm (3)
  • 55.0 mm (6)
  • 57.151 mm (6)
  • 59.0 mm (2)
  • 60.0 mm (14)
  • 60.95 mm (34)
  • 63.0 mm (64)
  • 63.5 mm (14)
  • 65.0 mm (1)
  • 65.825 mm (4)
  • 67.3 mm (2)
  • 70.0 mm (15)
  • 76.95 mm (26)
  • 82.551 mm (10)
  • 100.0 mm (4)
Minimum Axial Groove Diameter Min