successfully added to cart
View Cart

Notifications

Mark all as read

Boring Bars

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (63)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (63)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (63)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (63)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (63)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (63)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (63)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (63)
  • M Stainless Steel (63)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (63)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (63)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (63)
  • K Cast Iron (63)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (63)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (63)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (63)
  • N Non-Ferrous Materials (63)
    • N1
      Wrought Aluminum
      (63)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (63)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (63)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (63)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (63)
    • N6
      Carbon, Graphite Composites, CFRP
      (63)
    • N7
      MMC's
      (63)
  • S High-Temp Alloys (63)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (63)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (63)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (63)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (63)
  • H Hardened Materials (63)
    • H1
      Hardened Materials 44-48 HRC
      (63)
    • H2
      Hardened Materials 48-55 HRC
      (53)
    • H3
      Hardened Materials 56-60 HRC
      (26)
    • H4
      Hardened Materials >60 HRC
      (26)
Applications
Applications
  • Face Grooving Face Grooving (62)
  • Grooving Grooving (4)
  • ID Grooving ID Grooving (63)
  • ID Thread Turning ID Thread Turning (63)
  • Threading Threading (2)
Type of Thread
Type of Thread
  • 60 (61)
  • ACME (28)
  • API (26)
  • API RD (20)
  • BSW (18)
  • BUTTRESS (53)
  • M (30)
  • NPT (18)
  • STUB ACME (18)
  • UN (53)
  • UNJ (18)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (63)
  • Lightly Interrupted Cut (63)
  • Smooth Cut (63)
  • Varying Depth of Cut (63)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (61)
  • 2.0 (55)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (18)
  • 0.003 in (61)
  • 0.004 in (45)
  • 0.005 in (18)
  • 0.006 in (26)
  • 0.007 in (38)
  • 0.008 in (61)
  • 0.01 in (38)
  • 0.011 in (18)
  • 0.012 in (18)
  • 0.014 in (26)
  • 0.016 in (20)
  • 0.017 in (18)
  • 0.019 in (26)
  • 0.02 in (45)
  • 0.023 in (26)
  • 0.03 in (27)
  • 0.031 in (45)
  • 0.033 in (2)
  • 0.035 in (26)
  • 0.039 in (45)
  • 0.047 in (45)
  • 0.049 in (45)
  • 0.06 in (45)
  • 0.062 in (18)
  • 0.063 in (53)
  • 0.069 in (45)
  • 0.078 in (18)
  • 0.079 in (26)
  • 0.089 in (26)
  • 0.095 in (26)
  • 0.098 in (8)
  • 0.125 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (18)
  • 0.076 mm (61)
  • 0.1 mm (45)
  • 0.125 mm (18)
  • 0.151 mm (26)
  • 0.176 mm (38)
  • 0.2 mm (61)
  • 0.225 mm (18)
  • 0.25 mm (38)
  • 0.275 mm (18)
  • 0.301 mm (18)
  • 0.325 mm (26)
  • 0.351 mm (26)
  • 0.4 mm (20)
  • 0.426 mm (18)
  • 0.45 mm (26)
  • 0.476 mm (8)
  • 0.5 mm (45)
  • 0.576 mm (26)
  • 0.75 mm (27)
  • 0.775 mm (45)
  • 0.826 mm (2)
  • 0.9 mm (26)
  • 1.0 mm (45)
  • 1.201 mm (45)
  • 1.25 mm (45)
  • 1.5 mm (45)
  • 1.576 mm (18)
  • 1.6 mm (53)
  • 1.75 mm (45)
  • 1.975 mm (18)
  • 2.0 mm (26)
  • 2.25 mm (26)
  • 2.401 mm (26)
  • 2.5 mm (8)
  • 3.176 mm (8)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (8)
  • K2885 (45)
  • K313 (53)
  • K420 (63)
  • K4H (33)
  • K68 (63)
  • KB1345 (26)
  • KB1630 (26)
  • KB5625 (18)
  • KBH20 (8)
  • KC250 (53)
  • KC5010 (63)
  • KC5025 (63)
  • KC5410 (53)
  • KC710 (53)
  • KC720 (61)
  • KC722 (53)
  • KC730 (63)
  • KC732 (18)
  • KC810 (63)
  • KC850 (55)
  • KC910 (33)
  • KC9110 (53)
  • KC9120 (18)
  • KC9320 (53)
  • KC935 (53)
  • KC950 (53)
  • KCK20 (41)
  • KCK20B (53)
  • KCP10B (53)
  • KCP25B (53)
  • KCU10 (63)
  • KCU25 (63)
  • KD050 (8)
  • KD081 (18)
  • KD100 (23)
  • KD120 (26)
  • KD1425 (18)
  • KT175 (45)
  • KT315 (53)
  • KU10T (53)
  • KU25T (53)
  • KU30T (53)
  • KY3000 (26)
Hand Of Tool
Hand Of Tool
  • L (24)
  • R (39)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 11.175 mm (3)
  • 11.5 mm (2)
  • 12.201 mm (1)
  • 15.25 mm (1)
  • 18.5 mm (2)
  • 18.55 mm (6)
  • 20.326 mm (1)
  • 22.0 mm (3)
  • 25.401 mm (5)
  • 26.0 mm (2)
  • 28.576 mm (5)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 50.801 mm (2)
  • 54.0 mm (4)
  • 57.151 mm (1)
  • 63.5 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (1)
  • 76.2 mm (1)
  • 82.551 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.44 in (3)
  • 0.453 in (2)
  • 0.48 in (1)
  • 0.6 in (1)
  • 0.728 in (2)
  • 0.73 in (6)
  • 0.8 in (1)
  • 0.866 in (3)
  • 1.0 in (5)
  • 1.024 in (2)
  • 1.125 in (5)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.732 in (2)
  • 1.75 in (2)
  • 2.0 in (2)
  • 2.126 in (4)
  • 2.25 in (1)
  • 2.5 in (4)
  • 2.75 in (4)
  • 2.757 in (1)
  • 3.0 in (1)
  • 3.25 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (62)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (62)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.291 in (1)
  • 1.5 in (1)
  • 1.555 in (1)
  • 1.87 in (1)
  • 1.891 in (2)
  • 2.0 in (3)
  • 2.499 in (1)
  • 2.5 in (4)
  • 2.52 in (2)
  • 3.0 in (4)
  • 3.125 in (1)
  • 3.15 in (2)
  • 3.75 in (3)
  • 3.781 in (1)
  • 3.938 in (4)
  • 4.0 in (4)
  • 4.5 in (2)
  • 5.0 in (2)
  • 5.039 in (2)
  • 6.0 in (4)
  • 6.299 in (4)
  • 7.0 in (3)
  • 7.875 in (1)
  • 8.0 in (6)
  • 10.0 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.801 mm (1)
  • 38.1 mm (1)
  • 39.5 mm (1)
  • 47.5 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (3)
  • 63.475 mm (1)
  • 63.5 mm (4)
  • 64.0 mm (2)
  • 76.2 mm (4)
  • 79.375 mm (1)
  • 80.0 mm (2)
  • 95.25 mm (3)
  • 96.0 mm (1)
  • 100.0 mm (4)
  • 101.601 mm (4)
  • 114.301 mm (2)
  • 127.0 mm (2)
  • 128.0 mm (2)
  • 152.4 mm (4)
  • 160.0 mm (4)
  • 177.8 mm (3)
  • 200.0 mm (1)
  • 203.201 mm (6)
  • 254.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (9)
  • H (6)
  • S (48)
Front-End
Clamp Style
Clamp Style
  • N (62)
Cutting Width
Cutting Width
  • 0.02 in (27)
  • 0.031 in (35)
  • 0.035 in (27)
  • 0.039 in (45)
  • 0.041 in (27)
  • 0.047 in (53)
  • 0.055 in (27)
  • 0.058 in (27)
  • 0.06 in (45)
  • 0.061 in (12)
  • 0.062 in (53)
  • 0.067 in (27)
  • 0.069 in (45)
  • 0.073 in (18)
  • 0.077 in (27)
  • 0.078 in (18)
  • 0.079 in (45)
  • 0.088 in (45)
  • 0.089 in (45)
  • 0.095 in (53)
  • 0.097 in (18)
  • 0.098 in (45)
  • 0.105 in (18)
  • 0.108 in (45)
  • 0.11 in (18)
  • 0.119 in (53)
  • 0.122 in (18)
  • 0.125 in (53)
  • 0.126 in (53)
  • 0.128 in (45)
  • 0.129 in (27)
  • 0.131 in (8)
  • 0.138 in (53)
  • 0.143 in (18)
  • 0.147 in (12)
  • 0.15 in (27)
  • 0.152 in (27)
  • 0.156 in (18)
  • 0.157 in (26)
  • 0.167 in (26)
  • 0.169 in (18)
  • 0.177 in (26)
  • 0.178 in (18)
  • 0.181 in (8)
  • 0.185 in (21)
  • 0.188 in (26)
  • 0.189 in (26)
  • 0.192 in (8)
  • 0.193 in (8)
  • 0.195 in (18)
  • 0.197 in (8)
  • 0.202 in (8)
  • 0.213 in (8)
  • 0.217 in (8)
  • 0.218 in (2)
  • 0.219 in (8)
  • 0.237 in (8)
  • 0.25 in (10)
  • 0.255 in (8)
  • 0.281 in (2)
  • 0.312 in (2)
  • 0.375 in (2)
  • 0.383 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (27)
  • 0.775 mm (35)
  • 0.8 mm (27)
  • 0.9 mm (27)
  • 1.0 mm (45)
  • 1.05 mm (27)
  • 1.201 mm (53)
  • 1.401 mm (27)
  • 1.475 mm (27)
  • 1.5 mm (45)
  • 1.55 mm (12)
  • 1.576 mm (53)
  • 1.701 mm (27)
  • 1.75 mm (45)
  • 1.826 mm (18)
  • 1.951 mm (27)
  • 1.975 mm (18)
  • 2.0 mm (45)
  • 2.2 mm (45)
  • 2.225 mm (45)
  • 2.25 mm (45)
  • 2.401 mm (53)
  • 2.475 mm (18)
  • 2.5 mm (45)
  • 2.676 mm (18)
  • 2.75 mm (45)
  • 2.801 mm (18)
  • 3.0 mm (53)
  • 3.1 mm (18)
  • 3.176 mm (53)
  • 3.2 mm (53)
  • 3.25 mm (45)
  • 3.276 mm (27)
  • 3.325 mm (8)
  • 3.5 mm (53)
  • 3.6 mm (18)
  • 3.725 mm (12)
  • 3.801 mm (27)
  • 3.85 mm (27)
  • 3.95 mm (18)
  • 3.975 mm (8)
  • 4.0 mm (26)
  • 4.25 mm (26)
  • 4.3 mm (18)
  • 4.5 mm (26)
  • 4.525 mm (18)
  • 4.601 mm (8)
  • 4.7 mm (21)
  • 4.775 mm (26)
  • 4.801 mm (26)
  • 4.875 mm (8)
  • 4.9 mm (8)
  • 4.95 mm (18)
  • 5.0 mm (8)
  • 5.125 mm (8)
  • 5.4 mm (8)
  • 5.5 mm (8)
  • 5.525 mm (2)
  • 5.575 mm (8)
  • 6.0 mm (8)
  • 6.351 mm (10)
  • 6.476 mm (8)
  • 7.125 mm (2)
  • 7.926 mm (2)
  • 9.525 mm (2)
  • 9.726 mm (2)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 1 (8)
  • 2 (27)
  • 3 (18)
  • 4 (8)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.04 in (1)
  • 0.063 in (2)
  • 0.067 in (1)
  • 0.075 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.026 mm (1)
  • 1.6 mm (2)
  • 1.701 mm (1)
  • 1.901 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (26)
  • B L (18)
  • C N (26)
  • D P (23)
  • H T (53)
  • H W (63)
Back-End
Back-End Diameter
Back-End Diameter
  • 7.9 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (1)
  • 10.0 mm (1)
  • 12.0 mm (3)
  • 12.701 mm (8)
  • 15.875 mm (6)
  • 16.0 mm (3)
  • 19.05 mm (5)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (6)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (4)
  • 44.45 mm (3)
  • 50.0 mm (1)
  • 50.801 mm (6)
  • 63.5 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.311 in (1)
  • 0.374 in (1)
  • 0.375 in (1)
  • 0.394 in (1)
  • 0.473 in (3)
  • 0.5 in (8)
  • 0.625 in (6)
  • 0.63 in (3)
  • 0.75 in (5)
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.0 in (6)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (4)
  • 1.75 in (3)
  • 1.969 in (1)
  • 2.0 in (6)
  • 2.5 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading Boring Bars
(2 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Head Diameter [D2] Head Diameter [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
1098943 A10KNNTOR1 A10KNNTOR1 11.5000 .4530 10.0 .394 9.9800 .3930 125.0000 4.921     7.0000 .2760 3.2000 .1260   NG1L 1.5 mm
    List price:
    $175.72 /each.
    Your price::
    Qty
    1098944 A12MNNTOR1 A12MNNTOR1 11.5000 .4530 12.0 .47 9.9800 .3930 150.0000 5.905 31.3000 1.235 7.0000 .2760 4.0000 .1600 1/16-27 NPT N.1L 1.5 mm
      List price:
      $175.72 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      Threading

      Top Notch™ Threading Boring Bars
      (1 Products)
      • I.D. Internal ThreadingI.D. Internal Threading
      • I.D. TurningI.D. Turning
      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
      • I.D. GroovingI.D. Grooving
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia Gage Insert Clamp Screw ID Drive Size
      1152834 E16RNNTOR2 E16RNNTOR2 KWH 22.0000 .8661 16.0 .6293 202.5910 7.976 10.7850 .4281 5.5370 .2180 N.2L T10
        List price:
        $778.43 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        Threading

        Top Notch™ Threading Boring Bars
        (17 Products)
        • I.D. Internal ThreadingI.D. Internal Threading
        • I.D. TurningI.D. Turning
        • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
        • I.D. GroovingI.D. Grooving
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
        1098946 A12MNNTOL2 A12MNNTOL2 18.5000 .7280 12.0 .47 150.0000 5.906 11.0000 .4330 1/16-27 NPT NG2R 2.5 mm
          List price:
          $175.72 /each.
          Your price::
          Qty
          1098945 A12MNNTOR2 A12MNNTOR2 18.5000 .7280 12.0 .47 150.0000 5.906 11.0000 .4330 1/16-27 NPT   2.5 mm
            List price:
            $175.72 /each.
            Your price::
            Qty
            1098948 A16MNNTOL2 A16MNNTOL2 22.0000 .8660 16.0 .63 150.0000 5.906 11.0000 .4330 1/8-27 NPT N.2R T10
              List price:
              $210.11 /each.
              Your price::
              Qty
              1098947 A16MNNTOR2 A16MNNTOR2 22.0000 .8660 16.0 .63 150.0000 5.906 11.0000 .4330 1/8-27 NPT N.2L T10
                List price:
                $210.11 /each.
                Your price::
                Qty