successfully added to cart
View Cart

Notifications

Mark all as read

Boring Heads

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
Applications
  • Face Grooving Face Grooving (6)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (6)
Type of Thread
Type of Thread
  • 60 (5)
  • ACME (6)
  • API (5)
  • API RD (3)
  • BSW (2)
  • BUTTRESS (5)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (5)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (6)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.003 in (5)
  • 0.004 in (2)
  • 0.005 in (2)
  • 0.006 in (5)
  • 0.007 in (5)
  • 0.008 in (5)
  • 0.01 in (5)
  • 0.011 in (2)
  • 0.012 in (2)
  • 0.014 in (5)
  • 0.016 in (3)
  • 0.017 in (2)
  • 0.019 in (5)
  • 0.02 in (2)
  • 0.023 in (5)
  • 0.031 in (2)
  • 0.033 in (1)
  • 0.035 in (5)
  • 0.039 in (2)
  • 0.047 in (2)
  • 0.049 in (2)
  • 0.06 in (2)
  • 0.062 in (2)
  • 0.063 in (5)
  • 0.069 in (2)
  • 0.078 in (2)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.095 in (5)
  • 0.098 in (3)
  • 0.125 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.076 mm (5)
  • 0.1 mm (2)
  • 0.125 mm (2)
  • 0.151 mm (5)
  • 0.176 mm (5)
  • 0.2 mm (5)
  • 0.225 mm (2)
  • 0.25 mm (5)
  • 0.275 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (5)
  • 0.351 mm (5)
  • 0.4 mm (3)
  • 0.426 mm (2)
  • 0.45 mm (5)
  • 0.476 mm (1)
  • 0.5 mm (2)
  • 0.576 mm (5)
  • 0.775 mm (2)
  • 0.826 mm (1)
  • 0.9 mm (5)
  • 1.0 mm (2)
  • 1.201 mm (2)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (2)
  • 1.6 mm (5)
  • 1.75 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.401 mm (5)
  • 2.5 mm (3)
  • 3.176 mm (3)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (2)
  • K313 (5)
  • K420 (6)
  • K4H (2)
  • K68 (6)
  • KB1345 (5)
  • KB1630 (5)
  • KB5625 (2)
  • KBH20 (1)
  • KC250 (2)
  • KC5010 (6)
  • KC5025 (6)
  • KC5410 (5)
  • KC710 (5)
  • KC720 (5)
  • KC722 (5)
  • KC730 (6)
  • KC732 (2)
  • KC810 (6)
  • KC850 (6)
  • KC910 (2)
  • KC9110 (5)
  • KC9120 (2)
  • KC9320 (5)
  • KC935 (5)
  • KC950 (5)
  • KCK20 (5)
  • KCK20B (5)
  • KCP10B (5)
  • KCP25B (5)
  • KCU10 (6)
  • KCU25 (6)
  • KD050 (1)
  • KD081 (2)
  • KD100 (4)
  • KD120 (5)
  • KD1425 (2)
  • KT175 (2)
  • KT315 (5)
  • KU10T (5)
  • KU25T (5)
  • KU30T (5)
  • KY3000 (5)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (4)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 76.2 mm (3)
  • 82.551 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.0 in (3)
  • 3.25 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (5)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (5)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 9.0 in (1)
  • 10.0 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 228.601 mm (1)
  • 254.0 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 0.039 in (2)
  • 0.047 in (2)
  • 0.06 in (2)
  • 0.062 in (2)
  • 0.069 in (2)
  • 0.073 in (2)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.088 in (2)
  • 0.089 in (2)
  • 0.095 in (2)
  • 0.097 in (2)
  • 0.098 in (2)
  • 0.105 in (2)
  • 0.108 in (2)
  • 0.11 in (2)
  • 0.119 in (5)
  • 0.122 in (2)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.128 in (2)
  • 0.131 in (1)
  • 0.138 in (5)
  • 0.143 in (2)
  • 0.156 in (2)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (2)
  • 0.177 in (5)
  • 0.178 in (2)
  • 0.181 in (1)
  • 0.185 in (3)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
  • 0.197 in (3)
  • 0.202 in (3)
  • 0.213 in (3)
  • 0.217 in (3)
  • 0.218 in (1)
  • 0.219 in (3)
  • 0.237 in (3)
  • 0.25 in (4)
  • 0.255 in (3)
  • 0.281 in (1)
  • 0.312 in (1)
  • 0.375 in (1)
  • 0.383 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (2)
  • 1.201 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (2)
  • 1.75 mm (2)
  • 1.826 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (2)
  • 2.2 mm (2)
  • 2.225 mm (2)
  • 2.25 mm (2)
  • 2.401 mm (2)
  • 2.475 mm (2)
  • 2.5 mm (2)
  • 2.676 mm (2)
  • 2.75 mm (2)
  • 2.801 mm (2)
  • 3.0 mm (5)
  • 3.1 mm (2)
  • 3.176 mm (5)
  • 3.2 mm (5)
  • 3.25 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (5)
  • 3.6 mm (2)
  • 3.95 mm (2)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.25 mm (5)
  • 4.3 mm (2)
  • 4.5 mm (5)
  • 4.525 mm (2)
  • 4.601 mm (1)
  • 4.7 mm (3)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (3)
  • 5.125 mm (3)
  • 5.4 mm (3)
  • 5.5 mm (3)
  • 5.525 mm (1)
  • 5.575 mm (3)
  • 6.0 mm (3)
  • 6.351 mm (4)
  • 6.476 mm (3)
  • 7.125 mm (1)
  • 7.926 mm (1)
  • 9.525 mm (1)
  • 9.726 mm (1)
Cutting Width Min to Cutting Width Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (5)
  • B L (2)
  • C N (5)
  • D P (4)
  • H T (5)
  • H W (6)
Back-End
Back-End Diameter
Back-End Diameter
  • 57.151 mm (1)
  • 63.5 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 2.25 in (1)
  • 2.5 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading Boring Heads
(6 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Gage Insert Clamp Screw ID Drive Size
1095516 H36NER4W H36NER4W 76.2000 3.000 57.15 2.25 38.1000 1.500 41.2750 1.625 N.4L 25 IP
    List price:
    $374.89 /each.
    Your price::
    Qty
    1095534 H40NEL3W H40NEL3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3R 25 IP
      List price:
      $386.12 /each.
      Your price::
      Qty
      1095536 H40NEL4W H40NEL4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4R 25 IP
        List price:
        $386.12 /each.
        Your price::
        Qty
        1095533 H40NER3W H40NER3W 76.2000 3.000 63.5 2.5 38.1000 1.500 41.2750 1.625 N.3L 25 IP
          List price:
          $386.12 /each.
          Your price::
          Qty
          1095535 H40NER4W H40NER4W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.4L 25 IP
            List price:
            $386.12 /each.
            Your price::
            Qty
            1095571 H40NER6W H40NER6W 82.5500 3.250 63.5 2.5 41.2750 1.625 41.2750 1.625 N.6L 5/32
              List price:
              $386.12 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              The following CAD files are available

              Please select a file to download

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart