successfully added to cart
View Cart

Notifications

Mark all as read

Toolholders

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (117)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (117)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (117)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (117)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (117)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (117)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (117)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (117)
  • M Stainless Steel (117)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (117)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (117)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (117)
  • K Cast Iron (117)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (117)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (117)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (117)
  • N Non-Ferrous Materials (117)
    • N1
      Wrought Aluminum
      (117)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (117)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (114)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (117)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (117)
    • N6
      Carbon, Graphite Composites, CFRP
      (117)
    • N7
      MMC's
      (114)
  • S High-Temp Alloys (117)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (117)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (117)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (117)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (117)
  • H Hardened Materials (114)
    • H1
      Hardened Materials 44-48 HRC
      (114)
    • H2
      Hardened Materials 48-55 HRC
      (107)
    • H3
      Hardened Materials 56-60 HRC
      (64)
    • H4
      Hardened Materials >60 HRC
      (64)
Applications
Applications
  • Face Grooving Face Grooving (117)
  • Grooving Grooving (117)
  • OD Thread Turning OD Thread Turning (117)
  • Threading Threading (117)
Type of Thread
Type of Thread
  • 60 (107)
  • ACME (69)
  • API (64)
  • API RD (44)
  • BSW (39)
  • BUTTRESS (107)
  • M (63)
  • NPT (39)
  • STUB ACME (39)
  • UN (109)
  • UNJ (39)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (115)
  • Lightly Interrupted Cut (115)
  • Smooth Cut (115)
  • Varying Depth of Cut (115)
Connection Style
Connection Style
  • Toolholder (80)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (107)
  • 2.0 (115)
  • 4.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (39)
  • 0.003 in (107)
  • 0.004 in (82)
  • 0.005 in (41)
  • 0.006 in (64)
  • 0.007 in (88)
  • 0.008 in (107)
  • 0.01 in (88)
  • 0.011 in (39)
  • 0.012 in (39)
  • 0.014 in (67)
  • 0.016 in (44)
  • 0.017 in (39)
  • 0.019 in (64)
  • 0.02 in (82)
  • 0.023 in (67)
  • 0.03 in (43)
  • 0.031 in (82)
  • 0.033 in (8)
  • 0.035 in (64)
  • 0.039 in (82)
  • 0.047 in (82)
  • 0.049 in (82)
  • 0.06 in (82)
  • 0.062 in (39)
  • 0.063 in (107)
  • 0.069 in (82)
  • 0.078 in (39)
  • 0.079 in (64)
  • 0.089 in (64)
  • 0.095 in (64)
  • 0.098 in (25)
  • 0.125 in (25)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (39)
  • 0.076 mm (107)
  • 0.1 mm (82)
  • 0.125 mm (41)
  • 0.151 mm (64)
  • 0.176 mm (88)
  • 0.2 mm (107)
  • 0.225 mm (39)
  • 0.25 mm (88)
  • 0.275 mm (39)
  • 0.301 mm (39)
  • 0.325 mm (67)
  • 0.351 mm (64)
  • 0.4 mm (44)
  • 0.426 mm (39)
  • 0.45 mm (64)
  • 0.476 mm (21)
  • 0.5 mm (82)
  • 0.576 mm (67)
  • 0.75 mm (43)
  • 0.775 mm (82)
  • 0.826 mm (8)
  • 0.9 mm (64)
  • 1.0 mm (82)
  • 1.201 mm (82)
  • 1.25 mm (82)
  • 1.5 mm (82)
  • 1.576 mm (39)
  • 1.6 mm (107)
  • 1.75 mm (82)
  • 1.975 mm (39)
  • 2.0 mm (64)
  • 2.25 mm (64)
  • 2.401 mm (64)
  • 2.5 mm (25)
  • 3.176 mm (25)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (82)
  • K313 (107)
  • K420 (115)
  • K4H (58)
  • K68 (115)
  • KB1345 (64)
  • KB1630 (64)
  • KB5625 (39)
  • KBH20 (21)
  • KC250 (82)
  • KC5010 (114)
  • KC5025 (117)
  • KC5410 (107)
  • KC710 (107)
  • KC720 (107)
  • KC722 (107)
  • KC730 (112)
  • KC732 (39)
  • KC810 (115)
  • KC850 (117)
  • KC910 (58)
  • KC9110 (107)
  • KC9120 (39)
  • KC9320 (107)
  • KC935 (107)
  • KC950 (107)
  • KCK20 (83)
  • KCK20B (107)
  • KCP10B (107)
  • KCP25B (107)
  • KCU10 (112)
  • KCU25 (116)
  • KD050 (21)
  • KD081 (39)
  • KD100 (51)
  • KD120 (64)
  • KD1425 (39)
  • KT175 (82)
  • KT315 (107)
  • KU10T (107)
  • KU25T (107)
  • KU30T (107)
  • KY3000 (64)
Hand Of Tool
Hand Of Tool
  • L (33)
  • R (47)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (76)
  • 38.1 mm (4)
  • 41.301 mm (27)
  • 47.6 mm (27)
  • 55.875 mm (3)
  • 56.625 mm (29)
  • 57.2 mm (15)
  • 60.325 mm (2)
  • 63.5 mm (18)
  • 76.2 mm (4)
  • 88.9 mm (58)
  • 127.0 mm (1)
  • 139.701 mm (27)
  • 146.05 mm (3)
  • 174.601 mm (27)
  • 209.601 mm (17)
  • 222.3 mm (15)
  • 333.0 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (76)
  • 1.5 in (4)
  • 1.627 in (27)
  • 1.874 in (27)
  • 2.2 in (3)
  • 2.229 in (29)
  • 2.253 in (15)
  • 2.375 in (2)
  • 2.5 in (18)
  • 3.0 in (4)
  • 3.5 in (58)
  • 5.0 in (1)
  • 5.5 in (27)
  • 5.75 in (3)
  • 6.875 in (27)
  • 8.252 in (17)
  • 8.752 in (15)
  • 13.11 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (112)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (112)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (80)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (78)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (10)
  • 2.0 in (23)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (10)
  • 50.801 mm (23)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 0.02 in (43)
  • 0.031 in (43)
  • 0.035 in (43)
  • 0.039 in (82)
  • 0.041 in (43)
  • 0.047 in (82)
  • 0.055 in (43)
  • 0.058 in (43)
  • 0.06 in (82)
  • 0.061 in (24)
  • 0.062 in (82)
  • 0.067 in (43)
  • 0.069 in (82)
  • 0.073 in (39)
  • 0.077 in (43)
  • 0.078 in (39)
  • 0.079 in (82)
  • 0.088 in (82)
  • 0.089 in (82)
  • 0.095 in (82)
  • 0.097 in (39)
  • 0.098 in (82)
  • 0.105 in (39)
  • 0.108 in (82)
  • 0.11 in (39)
  • 0.119 in (107)
  • 0.122 in (39)
  • 0.125 in (107)
  • 0.126 in (107)
  • 0.128 in (82)
  • 0.129 in (43)
  • 0.131 in (21)
  • 0.138 in (107)
  • 0.143 in (39)
  • 0.147 in (24)
  • 0.15 in (43)
  • 0.152 in (43)
  • 0.156 in (39)
  • 0.157 in (64)
  • 0.167 in (64)
  • 0.169 in (39)
  • 0.177 in (64)
  • 0.178 in (39)
  • 0.181 in (21)
  • 0.185 in (52)
  • 0.188 in (64)
  • 0.189 in (64)
  • 0.192 in (21)
  • 0.193 in (21)
  • 0.195 in (39)
  • 0.197 in (28)
  • 0.202 in (25)
  • 0.213 in (25)
  • 0.217 in (25)
  • 0.218 in (5)
  • 0.219 in (25)
  • 0.237 in (28)
  • 0.25 in (33)
  • 0.255 in (25)
  • 0.276 in (3)
  • 0.281 in (8)
  • 0.312 in (8)
  • 0.315 in (2)
  • 0.345 in (3)
  • 0.354 in (3)
  • 0.375 in (8)
  • 0.38 in (3)
  • 0.383 in (5)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (43)
  • 0.775 mm (43)
  • 0.8 mm (43)
  • 0.9 mm (43)
  • 1.0 mm (82)
  • 1.05 mm (43)
  • 1.201 mm (82)
  • 1.401 mm (43)
  • 1.475 mm (43)
  • 1.5 mm (82)
  • 1.55 mm (24)
  • 1.576 mm (82)
  • 1.701 mm (43)
  • 1.75 mm (82)
  • 1.826 mm (39)
  • 1.951 mm (43)
  • 1.975 mm (39)
  • 2.0 mm (82)
  • 2.2 mm (82)
  • 2.225 mm (82)
  • 2.25 mm (82)
  • 2.401 mm (82)
  • 2.475 mm (39)
  • 2.5 mm (82)
  • 2.676 mm (39)
  • 2.75 mm (82)
  • 2.801 mm (39)
  • 3.0 mm (107)
  • 3.1 mm (39)
  • 3.176 mm (107)
  • 3.2 mm (107)
  • 3.25 mm (82)
  • 3.276 mm (43)
  • 3.325 mm (21)
  • 3.5 mm (107)
  • 3.6 mm (39)
  • 3.725 mm (24)
  • 3.801 mm (43)
  • 3.85 mm (43)
  • 3.95 mm (39)
  • 3.975 mm (21)
  • 4.0 mm (64)
  • 4.25 mm (64)
  • 4.3 mm (39)
  • 4.5 mm (64)
  • 4.525 mm (39)
  • 4.601 mm (21)
  • 4.7 mm (52)
  • 4.775 mm (64)
  • 4.801 mm (64)
  • 4.875 mm (21)
  • 4.9 mm (21)
  • 4.95 mm (39)
  • 5.0 mm (28)
  • 5.125 mm (25)
  • 5.4 mm (25)
  • 5.5 mm (25)
  • 5.525 mm (5)
  • 5.575 mm (25)
  • 6.0 mm (28)
  • 6.351 mm (33)
  • 6.476 mm (25)
  • 7.0 mm (3)
  • 7.125 mm (8)
  • 7.926 mm (8)
  • 8.0 mm (2)
  • 8.75 mm (3)
  • 9.0 mm (3)
  • 9.525 mm (8)
  • 9.65 mm (3)
  • 9.726 mm (5)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (18)
  • 3 (14)
  • 4 (8)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.07 in (2)
  • 0.13 in (1)
  • 0.138 in (40)
  • 0.21 in (39)
  • 0.24 in (2)
  • 0.25 in (2)
  • 0.293 in (8)
  • 0.294 in (15)
  • 0.3 in (1)
  • 0.334 in (4)
  • 0.416 in (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.776 mm (2)
  • 3.301 mm (1)
  • 3.5 mm (40)
  • 5.325 mm (39)
  • 6.101 mm (2)
  • 6.351 mm (2)
  • 7.45 mm (8)
  • 7.476 mm (15)
  • 7.625 mm (1)
  • 8.475 mm (4)
  • 10.55 mm (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (64)
  • B L (39)
  • C N (64)
  • D P (51)
  • H T (107)
  • H W (117)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (80)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading Toolholders
(2 Products)
  • ThreadingThreading
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • GroovingGrooving
  • ChamferingChamfering
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
1097673 NSUR124C NSUR124C 19.0500 .7500 19.0500 .7500 22.2250 .8750 127.0000 5.000 31.7500 1.250 12.7000 .5000 6.0960 .2400 NTU4R 25 IP
    List price:
    $122.00 /each.
    Your price::
    Qty
    1097676 NSUR164D NSUR164D 25.4000 1.000 25.4000 1.000 28.5750 1.125 152.4000 6.000 31.7500 1.250 12.7000 .5000 6.0960 .2400 NTU4R 25 IP
      List price:
      $131.11 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      Threading

      Top Notch™ Threading Toolholders
      (5 Products)
      • ThreadingThreading
      • TurningTurning
      • ProfilingProfiling
      • FacingFacing
      • ChamferingChamfering
      • GroovingGrooving
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size Jack Screw ID Drive Size
      1097644 NSRDH122B NSRDH122B 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.0500 .7500 10.2000 .4000 3.3000 .1300 N.2R 7/64 1/8
        List price:
        $175.46 /each.
        Your price::
        Qty
        1097649 NSRDH123A NSRDH123A 19.0500 .7500 19.0500 .7500 31.7500 1.250 101.6000 4.000 31.8000 1.250 14.7000 .5800 5.3300 .2100 N.3R 25 IP  
          List price:
          $175.46 /each.
          Your price::
          Qty
          1097645 NSRDH162C NSRDH162C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.0500 .7500 10.2000 .4000 3.5100 .1380 N.2R 7/64 1/8
            List price:
            $182.89 /each.
            Your price::
            Qty
            1097646 NSRDH163C NSRDH163C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.8000 1.250 14.7000 .5800 5.3300 .2100 N.3R 25 IP  
              List price:
              $182.89 /each.
              Your price::
              Qty
              1097650 NSRDH204D NSRDH204D 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.1000 1.380 15.7000 .6200 7.4600 .2940 N.4R 25 IP 3/16
                List price:
                $215.45 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                Threading

                Top Notch™ Threading Toolholders
                (14 Products)
                • ThreadingThreading
                • TurningTurning
                • ProfilingProfiling
                • FacingFacing
                • ChamferingChamfering
                • GroovingGrooving
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [B3] Head Back Offset [B3] Head Back Offset [L3] Head Back Length [L3] Head Back Length Gage Insert Clamp Screw ID Drive Size
                1095575 NASL083D NASL083D 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.7500 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3L 25 IP
                  List price:
                  $115.19 /each.
                  Your price::
                  Qty
                  1095577 NASL102B NASL102B 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.0500 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
                    List price:
                    $115.19 /each.
                    Your price::
                    Qty
                    1095670 NASR082D NASR082D 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 19.0500 .7500 8.8900 .3500 3.5050 .1380         N.2R 7/64
                      List price:
                      $115.19 /each.
                      Your price::
                      Qty
                      1095574 NASR083D NASR083D 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.7500 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3R 25 IP
                        List price:
                        $115.19 /each.
                        Your price::
                        Qty
                        1095576 NASR102B NASR102B 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.0500 .7500 8.8900 .3500 3.5050 .1380         N.2R 7/64
                          List price:
                          $115.19 /each.
                          Your price::
                          Qty
                          1095668 NASR103B NASR103B 15.8800 .6250 15.8800 .6250 15.8800 .6250 114.3000 4.500 33.0100 1.300     5.334 .2100         N.3R 25 IP
                            List price:
                            $115.19 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance
                            Qty

                            Sold in pkg. of

                            ORIGINAL PRODUCT

                            Threading

                            Top Notch™ Threading Toolholders
                            (37 Products)
                            • ThreadingThreading
                            • TurningTurning
                            • ProfilingProfiling
                            • FacingFacing
                            • ChamferingChamfering
                            • GroovingGrooving
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [L4] Maximum Boring Depth [L4] Maximum Boring Depth Gage Insert Clamp Screw ID Drive Size
                            1095580 NEL062 NEL062 9.5250 .3750 9.5250 .3750 19.0500 .7500 63.5000 2.500 12.7000 .5000     3.5050 .1380 25.4000 1.000 N.2R 7/64
                              List price:
                              $101.80 /each.
                              Your price::
                              Qty
                              1097231 NEL122B NEL122B 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 12.7000 .5000 7.3660 .2900 3.5050 .1380 25.4000 1.000 N.2R 7/64
                                List price:
                                $123.72 /each.
                                Your price::
                                Qty
                                1097233 NEL123B NEL123B 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.0500 .7500     5.3340 .2100 50.8000 2.000 N.3R 25 IP
                                  List price:
                                  $123.72 /each.
                                  Your price::
                                  Qty
                                  1097232 NEL162C NEL162C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 12.7000 .5000 10.4140 .4100 3.5050 .1380 25.4000 1.000 N.2R 7/64
                                    List price:
                                    $128.67 /each.
                                    Your price::
                                    Qty
                                    1097234 NEL163C NEL163C 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.0500 .7500     5.3340 .2100 50.8000 2.000 N.3R 25 IP
                                      List price:
                                      $128.67 /each.
                                      Your price::