Top Notch™ Threading and Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (23)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(23)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(23)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(23)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(23)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(23)
- M Stainless Steel (23)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(23)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(23)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(23)
- K Cast Iron (23)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(23)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (23)
- N7MMC's (23)
- S High-Temp Alloys (23)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(23)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(23)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(23)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(23)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
- H2Hardened Materials 48-55 HRC(23)
- H3Hardened Materials 56-60 HRC(23)
- H4Hardened Materials >60 HRC(23)
Applications
Applications
- Chamfer Turning (8)
- Cut-Off (8)
- Deep Grooving (8)
- Face Grooving (8)
- Facing (8)
- Grooving (22)
- ID Grooving (3)
- ID Thread Turning (11)
- Multiple Direction Cutting (8)
- OD Thread Turning (22)
- Plunge Turning (8)
- Profiling (8)
- Threading (15)
- Turning (8)
Type of Thread
Type of Thread
- 60 (23)
- ACME (14)
- API (14)
- API RD (10)
- BSW (10)
- BUTTRESS (23)
- M (15)
- NPT (10)
- STUB ACME (10)
- UN (23)
- UNJ (10)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (23)
- Lightly Interrupted Cut (23)
- Smooth Cut (23)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (15)
- 93.0 (8)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (23)
- 2.0 (23)
to
Over All Length [L]
Over All Length [L]
- 0.984 in(4)
- 1.181 in(19)
to
Over All Length [L]
Over All Length [L]
- 25.0 mm(4)
- 30.0 mm(19)
to
Corner Radius
Corner Radius
- 0.002 in(10)
- 0.003 in(23)
- 0.004 in(19)
- 0.005 in(10)
- 0.006 in(14)
- 0.007 in(19)
- 0.008 in(23)
- 0.01 in(19)
- 0.011 in(10)
- 0.012 in(10)
- 0.014 in(14)
- 0.016 in(10)
- 0.019 in(14)
- 0.02 in(19)
- 0.023 in(14)
- 0.03 in(9)
- 0.031 in(19)
- 0.035 in(14)
- 0.039 in(19)
- 0.047 in(19)
- 0.049 in(19)
- 0.06 in(19)
- 0.062 in(10)
- 0.063 in(23)
- 0.069 in(19)
- 0.078 in(10)
- 0.079 in(14)
- 0.089 in(14)
- 0.095 in(14)
- 0.098 in(4)
- 0.125 in(4)
to
Corner Radius
Corner Radius
- 0.05 mm(10)
- 0.076 mm(23)
- 0.1 mm(19)
- 0.125 mm(10)
- 0.151 mm(14)
- 0.176 mm(19)
- 0.2 mm(23)
- 0.225 mm(10)
- 0.25 mm(19)
- 0.275 mm(10)
- 0.301 mm(10)
- 0.325 mm(14)
- 0.351 mm(14)
- 0.4 mm(10)
- 0.45 mm(14)
- 0.476 mm(5)
- 0.5 mm(19)
- 0.576 mm(14)
- 0.75 mm(9)
- 0.775 mm(19)
- 0.9 mm(14)
- 1.0 mm(19)
- 1.201 mm(19)
- 1.25 mm(19)
- 1.5 mm(19)
- 1.576 mm(10)
- 1.6 mm(23)
- 1.75 mm(19)
- 1.975 mm(10)
- 2.0 mm(14)
- 2.25 mm(14)
- 2.401 mm(14)
- 2.5 mm(4)
- 3.176 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K2885 (19)
- K313 (23)
- K420 (23)
- K4H (14)
- K68 (23)
- KB1345 (14)
- KB1630 (14)
- KB5625 (10)
- KBH20 (5)
- KC250 (19)
- KC5010 (23)
- KC5025 (23)
- KC5410 (23)
- KC710 (23)
- KC720 (23)
- KC722 (23)
- KC730 (23)
- KC732 (10)
- KC810 (23)
- KC850 (23)
- KC910 (14)
- KC9110 (23)
- KC9120 (10)
- KC9320 (23)
- KC935 (23)
- KC950 (23)
- KCK20 (18)
- KCK20B (23)
- KCP10B (23)
- KCP25B (23)
- KCU10 (23)
- KCU10B (23)
- KCU25 (23)
- KCU25B (23)
- KD050 (5)
- KD081 (10)
- KD100 (12)
- KD120 (14)
- KD1425 (10)
- KT175 (19)
- KT315 (23)
- KU10T (23)
- KU25T (23)
- KU30T (23)
- KY3000 (14)
- THM (19)
- TN10P (16)
- TN6010 (23)
- TN6025 (23)
- TN7110 (23)
- WU10HT (5)
- WU10PT (8)
- WU25PT (5)
Hand Of Tool
Hand Of Tool
- L (13)
- R (10)
F Dimension
F Dimension
- 12.5 mm(4)
- 16.0 mm(5)
- 17.0 mm(4)
- 22.0 mm(7)
- 24.0 mm(2)
- 27.0 mm(1)
to
F Dimension
F Dimension
- 0.492 in(4)
- 0.63 in(5)
- 0.669 in(4)
- 0.866 in(7)
- 0.946 in(2)
- 1.063 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(19)
- 40.0 mm(3)
- 41.301 mm(8)
- 47.6 mm(8)
- 50.0 mm(1)
- 56.625 mm(8)
- 57.2 mm(3)
- 88.9 mm(16)
- 139.701 mm(8)
- 174.601 mm(8)
- 209.601 mm(3)
- 222.3 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(19)
- 1.575 in(3)
- 1.627 in(8)
- 1.874 in(8)
- 1.969 in(1)
- 2.229 in(8)
- 2.253 in(3)
- 3.5 in(16)
- 5.5 in(8)
- 6.875 in(8)
- 8.252 in(3)
- 8.752 in(3)
to
Cutting Direction
Cutting Direction
- E (9)
- S (14)
Boring Bar Material
Boring Bar Material
- S (4)
Front-End
Cutting Width
Cutting Width
- 0.02 in(9)
- 0.031 in(9)
- 0.035 in(9)
- 0.039 in(19)
- 0.041 in(9)
- 0.047 in(19)
- 0.055 in(9)
- 0.058 in(9)
- 0.06 in(19)
- 0.062 in(19)
- 0.067 in(9)
- 0.069 in(19)
- 0.073 in(10)
- 0.077 in(9)
- 0.078 in(10)
- 0.079 in(19)
- 0.088 in(19)
- 0.089 in(14)
- 0.094 in(5)
- 0.095 in(19)
- 0.097 in(10)
- 0.098 in(19)
- 0.105 in(10)
- 0.108 in(19)
- 0.11 in(10)
- 0.119 in(23)
- 0.122 in(10)
- 0.125 in(23)
- 0.126 in(23)
- 0.128 in(19)
- 0.129 in(9)
- 0.131 in(5)
- 0.138 in(23)
- 0.143 in(10)
- 0.147 in(5)
- 0.15 in(4)
- 0.151 in(5)
- 0.152 in(9)
- 0.156 in(10)
- 0.157 in(14)
- 0.167 in(14)
- 0.169 in(10)
- 0.177 in(14)
- 0.178 in(10)
- 0.185 in(12)
- 0.188 in(14)
- 0.189 in(14)
- 0.192 in(5)
- 0.193 in(5)
- 0.195 in(10)
- 0.196 in(10)
- 0.197 in(4)
- 0.202 in(4)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(4)
- 0.25 in(4)
- 0.256 in(4)
to
Cutting Width
Cutting Width
- 0.5 mm(9)
- 0.775 mm(9)
- 0.8 mm(9)
- 0.9 mm(9)
- 1.0 mm(19)
- 1.05 mm(9)
- 1.201 mm(19)
- 1.401 mm(9)
- 1.475 mm(9)
- 1.5 mm(19)
- 1.576 mm(19)
- 1.701 mm(9)
- 1.75 mm(19)
- 1.826 mm(10)
- 1.951 mm(9)
- 1.975 mm(10)
- 2.0 mm(19)
- 2.2 mm(19)
- 2.225 mm(19)
- 2.25 mm(14)
- 2.375 mm(5)
- 2.401 mm(19)
- 2.475 mm(10)
- 2.5 mm(19)
- 2.676 mm(10)
- 2.75 mm(19)
- 2.801 mm(10)
- 3.0 mm(23)
- 3.1 mm(10)
- 3.176 mm(23)
- 3.2 mm(23)
- 3.25 mm(19)
- 3.276 mm(9)
- 3.325 mm(5)
- 3.5 mm(23)
- 3.6 mm(10)
- 3.725 mm(5)
- 3.801 mm(4)
- 3.825 mm(5)
- 3.85 mm(9)
- 3.95 mm(10)
- 3.975 mm(5)
- 4.0 mm(14)
- 4.25 mm(14)
- 4.3 mm(10)
- 4.5 mm(14)
- 4.525 mm(10)
- 4.7 mm(12)
- 4.775 mm(14)
- 4.801 mm(14)
- 4.875 mm(5)
- 4.9 mm(5)
- 4.95 mm(10)
- 4.976 mm(10)
- 5.0 mm(4)
- 5.125 mm(4)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(4)
- 6.351 mm(4)
- 6.5 mm(4)
to
Insert Size
Insert Size
- 2 (9)
- 3 (10)
- 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(13)
- 0.138 in(5)
- 0.21 in(5)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(13)
- 3.5 mm(5)
- 5.325 mm(5)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (14)
- B L (10)
- C N (14)
- D P (12)
- H T (23)
- H W (23)
Back-End
System Size
System Size
- KM20 (8)
- KM25 (11)
- KM3225 (4)
Back-End Diameter
Back-End Diameter
- 20.0 mm(8)
- 25.0 mm(11)
- 32.0 mm(4)
to
Back-End Diameter
Back-End Diameter
- 0.787 in(8)
- 0.984 in(11)
- 1.26 in(4)
to
No filters matching ""