S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (14)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (14)
- H1Hardened Materials 44-48 HRC(14)
- H2Hardened Materials 48-55 HRC(14)
- H3Hardened Materials 56-60 HRC(14)
- H4Hardened Materials >60 HRC(14)
- C CFRP Materials (14)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (14)
Applications
Applications
- Facing (14)
- ID Thread Turning (1)
- Multiple Direction Cutting (14)
- Profiling (14)
- TRN Boring (14)
- Threading (1)
- Turning (14)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (5)
- 95.0 (9)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (14)
- 2.0 (14)
- 4.0 (9)
to
Over All Length [L]
Over All Length [L]
- 1.969 in(2)
- 2.362 in(3)
- 2.757 in(5)
- 3.15 in(4)
to
Over All Length [L]
Over All Length [L]
- 50.0 mm(2)
- 60.0 mm(3)
- 70.0 mm(5)
- 80.0 mm(4)
to
Corner Radius
Corner Radius
- 0.004 in(14)
- 0.008 in(14)
- 0.016 in(14)
- 0.031 in(14)
- 0.047 in(7)
to
Corner Radius
Corner Radius
- 0.1 mm(14)
- 0.2 mm(14)
- 0.4 mm(14)
- 0.8 mm(14)
- 1.201 mm(7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (5)
- CM1 (5)
- K313 (14)
- K68 (14)
- KB1345 (2)
- KB1610 (11)
- KB1625 (2)
- KB1630 (7)
- KB5610 (9)
- KB5625 (5)
- KB5630 (5)
- KB9610 (10)
- KBH20 (9)
- KC250 (4)
- KC5010 (14)
- KC5025 (14)
- KC5410 (14)
- KC710 (4)
- KC720 (14)
- KC730 (14)
- KC7310 (4)
- KC732 (14)
- KC8050 (14)
- KC810 (14)
- KC850 (14)
- KC9010 (11)
- KC9025 (14)
- KC910 (14)
- KC9105 (11)
- KC9110 (14)
- KC9120 (11)
- KC9125 (14)
- KC9225 (14)
- KC9240 (14)
- KC9240NEW (14)
- KC9315 (14)
- KC9320 (11)
- KC9325 (11)
- KC935 (14)
- KC950 (11)
- KC990 (14)
- KCD25 (14)
- KCK05 (14)
- KCK05B (2)
- KCK15 (11)
- KCK15B (11)
- KCK20 (14)
- KCK20B (14)
- KCM15 (14)
- KCM15B (9)
- KCM25 (14)
- KCM25B (11)
- KCM35 (7)
- KCP05 (14)
- KCP10 (14)
- KCP10B (14)
- KCP25 (14)
- KCP25B (14)
- KCP25C (14)
- KCP30 (14)
- KCPK05 (4)
- KCS10 (14)
- KCS10B (14)
- KCU10 (14)
- KCU10B (14)
- KCU25 (14)
- KCU25B (14)
- KD050 (11)
- KD100 (14)
- KD105 (12)
- KD120 (11)
- KD1400 (14)
- KD1405 (14)
- KD1425 (14)
- KT125 (4)
- KT150 (4)
- KT175 (14)
- KT315 (14)
- KTP10 (14)
- KU10 (9)
- KU10T (14)
- KU30T (11)
- W00162 (4)
- WBH10C (5)
- WBH10P (9)
- WBH10U (9)
- WBH25P (12)
- WBH30P (9)
- WDN00U (14)
- WDN25U (14)
- WK20CT (11)
- WM15CT (12)
- WM25CT (9)
- WP15CT (9)
- WP25CT (14)
Hand Of Tool
Hand Of Tool
- L (8)
- R (6)
Wiper Insert
Wiper Insert
- N (14)
- Y (14)
F Dimension
F Dimension
- 7.0 mm(2)
- 9.0 mm(3)
- 11.0 mm(2)
- 13.0 mm(4)
- 17.0 mm(3)
to
F Dimension
F Dimension
- 0.276 in(2)
- 0.354 in(3)
- 0.433 in(2)
- 0.512 in(4)
- 0.669 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(2)
- 16.0 mm(3)
- 20.0 mm(2)
- 25.0 mm(4)
- 32.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.512 in(2)
- 0.63 in(3)
- 0.787 in(2)
- 0.984 in(4)
- 1.26 in(3)
to
Cutting Direction
Cutting Direction
- B (9)
- E (5)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (6)
- POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(2)
- 1.655 in(1)
- 1.701 in(2)
- 2.205 in(2)
- 2.283 in(3)
- 2.362 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(2)
- 42.0 mm(1)
- 43.2 mm(2)
- 56.0 mm(2)
- 58.0 mm(3)
- 60.0 mm(4)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (5)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.119 in(3)
- 0.177 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.0 mm(3)
- 4.5 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (11)
- B L (14)
- D P (14)
- H T (14)
- H W (14)
Back-End
System Size
System Size
- KM32 (12)
- KM32TS (2)
No filters matching ""