S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (4)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (4)
- N1Wrought Aluminum (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
- N3High-Silicon Aluminum Alloys Si >12.2%(4)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (4)
- N6Carbon, Graphite Composites, CFRP (4)
- N7MMC's (4)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
- H2Hardened Materials 48-55 HRC(4)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
- C CFRP Materials (4)
- C1CFRP, CFRP / CFRP (4)
- C2CFRP / Aluminium CFRP / Non-Ferrous (4)
Applications
Applications
- Facing (4)
- Multiple Direction Cutting (3)
- Profiling (4)
- TRN Boring (4)
- Turning (4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (4)
- Lightly Interrupted Cut (4)
- Smooth Cut (4)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (1)
- 93.0 (2)
- 95.0 (1)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
- 2.0 (3)
- 3.0 (1)
- 4.0 (1)
to
Corner Radius
Corner Radius
- 0.001 in(2)
- 0.002 in(3)
- 0.004 in(4)
- 0.008 in(4)
- 0.016 in(4)
- 0.031 in(4)
- 0.047 in(4)
to
Corner Radius
Corner Radius
- 0.025 mm(2)
- 0.05 mm(3)
- 0.1 mm(4)
- 0.2 mm(4)
- 0.4 mm(4)
- 0.8 mm(4)
- 1.201 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- GH1 (2)
- HCK10 (3)
- HK1500 (2)
- HK35 (3)
- HT2 (4)
- HTX (4)
- HWK15 (3)
- K1010P (2)
- K10M (4)
- K10P (2)
- K10U (3)
- K15U (3)
- K20K (4)
- K313 (4)
- K420 (2)
- K68 (4)
- KB1345 (3)
- KB1610 (2)
- KB1625 (3)
- KB1630 (1)
- KB5610 (3)
- KB5625 (3)
- KB5630 (2)
- KB9610 (3)
- KBH10 (2)
- KBH20 (4)
- KC5010 (4)
- KC5020P (2)
- KC5025 (4)
- KC5410 (4)
- KC720 (4)
- KC730 (4)
- KC732 (4)
- KC8050 (4)
- KC810 (4)
- KC850 (4)
- KC9010 (2)
- KC9025 (4)
- KC910 (4)
- KC9105 (4)
- KC9110 (4)
- KC9120 (3)
- KC9125 (4)
- KC9225 (4)
- KC9240 (4)
- KC9240NEW (4)
- KC9315 (4)
- KC9320 (4)
- KC9325 (4)
- KC935 (4)
- KC950 (3)
- KC990 (3)
- KCD25 (4)
- KCK05 (4)
- KCK05B (3)
- KCK15 (4)
- KCK15B (4)
- KCK20 (4)
- KCK20B (4)
- KCM15 (4)
- KCM15B (3)
- KCM25 (4)
- KCM25B (4)
- KCM25S (2)
- KCM35 (4)
- KCM35B (3)
- KCP05 (4)
- KCP10 (4)
- KCP10B (4)
- KCP20S (2)
- KCP25 (4)
- KCP25B (4)
- KCP25C (4)
- KCP30 (4)
- KCP30B (1)
- KCS10 (4)
- KCS10B (4)
- KCS25S (2)
- KCU10 (4)
- KCU10B (4)
- KCU25 (4)
- KCU25B (4)
- KD1400 (3)
- KD1425 (3)
- KN10S (2)
- KT125 (2)
- KT175 (2)
- KT315 (4)
- KT325 (4)
- KTP10 (3)
- KTP25S (3)
- KU10 (2)
- KU10T (4)
- KU30T (4)
- NL300 (1)
- NL920 (1)
- PB100 (3)
- PB170 (2)
- PB250 (4)
- PD100 (3)
- PD50 (3)
- SP0PW3 (1)
- SP4019 (1)
- THM (4)
- THM-X (3)
- TN10P (4)
- TN10U (4)
- TN15M (4)
- TN15U (3)
- TN2000 (3)
- TN20K (4)
- TN20P (4)
- TN30M (4)
- TN5015 (4)
- TN5020 (4)
- TN5105 (4)
- TN5120 (4)
- TN6010 (4)
- TN6025 (3)
- TN7005 (3)
- TN7010 (4)
- TN7015 (4)
- TN7025 (4)
- TN7035 (4)
- TN7105 (4)
- TN7110 (4)
- TN7115 (4)
- TN7125 (4)
- TN7135 (4)
- TN8025 (4)
- TTI15 (2)
- TTM09 (1)
- TTR (4)
- TTX (2)
- W00342 (3)
- WBH10C (2)
- WBH10P (2)
- WBH10U (2)
- WBH20P (4)
- WBH25P (2)
- WBH25U (3)
- WBH30P (2)
- WBK45U (4)
- WDN25U (3)
- WK05CT (4)
- WK15CT (4)
- WK20CT (4)
- WM15CT (4)
- WM25CT (4)
- WP15CT (4)
- WP20TT (2)
- WP25CT (4)
- WP35CT (3)
- WS10PT (4)
- WS25PT (3)
- WU05PT (4)
- WU10HT (4)
- WU10PT (4)
- WU25PT (4)
Hand Of Tool
Hand Of Tool
- L (2)
- R (2)
Wiper Insert
Wiper Insert
- N (4)
- Y (3)
F Dimension
F Dimension
- 22.0 mm(2)
- 27.0 mm(2)
to
F Dimension
F Dimension
- 0.866 in(2)
- 1.063 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 40.0 mm(2)
- 50.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.575 in(2)
- 1.969 in(2)
to
Cutting Direction
Cutting Direction
- B (1)
- E (3)
Maximum Bore Depth
Maximum Bore Depth
- 4.418 in(2)
- 4.612 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 112.226 mm(2)
- 117.15 mm(2)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (1)
- D-DIAMOND/RHOMBIC 55 (2)
- T-TRIANGLE 60 (1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (4)
- D P (4)
- H T (4)
- H W (4)
No filters matching ""