Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
5720VZD16 Cylindrical Shank • Coarse and Medium Pitch • Stellram • Inch
Profiling/Pocketing Milling Cutter • Aluminum
Features and benefits
- High-speed profiling and pocketing aluminum alloy components in the aerospace industry.
- Maximum stability in high-speed applications.
- Through-tool coolant allows better chip evacuation and higher feed rates.
Uses and application
Face Milling
Ramping: Blank
Pocketing
Helical Milling
Counter Boring
Spiral Circular
Inclined Square End Mill
Slotting: Shoulder Profiling
Milling - Through Coolant
Shank - Cylindrical Plain
Workpiece Materials
K
Cast Iron
N
Non-Ferrous
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
K Cast Iron (2)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
-
-
N Non-Ferrous Materials (2)
-
N1Wrought Aluminum(2)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
-
N3High-Silicon Aluminum Alloys Si >12.2%(2)
-
Applications
Applications
-
Face Milling (2)
-
Pocket Milling (2)
-
Profile Milling (2)
-
Ramping (2)
-
Shoulder Bottom Shoulder (2)
-
Shoulder Milling (2)
-
-
-
Slot Milling (2)
-
Slot Side (2)
-
Slot Square End (2)
-
Slot T (2)
Cutting Diameter
Cutting Diameter
-
1.0 in (1)
-
1.25 in (1)
to
Cutting Diameter
Cutting Diameter
-
25.401 mm (1)
-
31.75 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
25.401 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
1.0 in (1)
to
Reach
Reach
-
2.75 in (1)
-
3.0 in (1)
to
Reach
Reach
-
69.851 mm (1)
-
76.2 mm (1)
to
Number of Flutes
Number of Flutes
-
2 (1)
-
3 (1)
Corner Radius
Corner Radius
-
0.012 in (2)
-
0.016 in (2)
-
0.031 in (2)
-
0.049 in (2)
-
0.066 in (2)
-
0.083 in (2)
-
0.103 in (2)
-
0.122 in (2)
-
0.13 in (2)
-
0.161 in (2)
-
0.206 in (2)
-
0.244 in (2)
to
Corner Radius
Corner Radius
-
0.301 mm (2)
-
0.4 mm (2)
-
0.8 mm (2)
-
1.25 mm (2)
-
1.675 mm (2)
-
2.1 mm (2)
-
2.6 mm (2)
-
3.1 mm (2)
-
3.301 mm (2)
-
4.101 mm (2)
-
5.2 mm (2)
-
6.2 mm (2)
to
Application
Maximum Ramp Angle
Maximum Ramp Angle
-
11.5 (1)
-
14.7 (1)
to
Front-End
Neck Diameter
Neck Diameter
-
0.961 in (1)
-
1.18 in (1)
to
Neck Diameter
Neck Diameter
-
24.401 mm (1)
-
29.975 mm (1)
to
Back-End
Back-End Diameter
Back-End Diameter
-
25.401 mm (1)
-
31.75 mm (1)
to
Back-End Diameter
Back-End Diameter
-
1.0 in (1)
-
1.25 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 2
of 2 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L] Overall Length | [L] Overall Length | [L2] Head Length | [L2] Head Length | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | Number of Inserts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5672718 | C5720VZ16CA1.0Z2R2.75 | C5720VZ16CA1.0Z02R2.7 | 25.4000 | 1.000 | 25.4 | 1.0 | 127.7620 | 5.030 | 69.8500 | 2.750 | 16.0000 | .6300 | 2 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$556.56
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5672885 | C5720VZ16CA1.25Z3R3.0 | C5720VZ16CA1.25Z3R3.0 | 31.7500 | 1.250 | 31.75 | 1.25 | 134.1120 | 5.280 | 76.2000 | 3.000 | 16.0000 | .6299 | 3 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$604.93
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Insert Selection Guide
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| – | (Light geometry) | (Strong geometry) | ||||
| – | wear resistance |  <="" td=""> | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | .F..721 | GH1 | .F..721 | GH1 | .F..721 | GH1 |
| N3 | .F..721 | GH1 | .F..721 | GH1 | .F..721 | GH1 |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
Recommended Starting Feeds [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw) | Insert Geometry | ||||||||||||
| 5% | 10% | 20% | 40–100% | |||||||||||
| ...FR721 | 0,03 | 0,33 | 0,41 | 0,025 | 0,25 | 0,31 | 0,021 | 0,21 | 0,27 | 0,02 | 0,20 | 0,25 | ...FR721 | |
| ...ER721 | 0,07 | 0,33 | 0,41 | 0,06 | 0,25 | 0,31 | 0,05 | 0,21 | 0,27 | 0,04 | 0,20 | 0,25 | ...ER721 | |
5720VZ16 Feeds fz (mm/tooth)
| Light Machining | General Purpose | Heavy Machining |
| size | Geometry | grade | operation | N | |
| Aluminium and Alloys 16% Si 116 HBN | Aluminium and Silicon 16% Si 92 HBN | ||||
| min–max | min–max | ||||
| 14mm | ...721 | GH1 | Profiling/Pocketing | 0,02 0,25 | 0,02 0,20 |
Recommended Starting Feeds [IPT]
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | |||||||||||
| 10% | 20% | 30% | 40–100% | ||||||||||
| .F..721 | .001 | .013 | .016 | .001 | .010 | .012 | .001 | .008 | .011 | .001 | .008 | .010 | .F..721 |
| .E..721 | .003 | .013 | .016 | .002 | .010 | .012 | .002 | .008 | .011 | .002 | .008 | .010 | .E..721 |