Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
Beyond BLAST™ KSSM™ 45° • 14mm IC • Shell Mills • Metric
Shell Mills
Features and benefits
- Precision Coolant Technology (PCT).
- Coolant delivery exactly to cutting area.
- Increased heat transfer.
- Improved chip control.
- Productivity booster for machining titanium.
- High coolant pressure capabilities.
Uses and application
Face Milling
Side Milling/Shoulder Milling: Eased Chamfer
Milling - Side and Face
Milling - Through Coolant
Workpiece Materials
P
Steel
M
Stainless Steel
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (3)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
-
-
M Stainless Steel (3)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
-
-
S High-Temp Alloys (3)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
-
-
H Hardened Materials (3)
-
H1Hardened Materials 44-48 HRC(3)
-
Applications
Applications
-
Chamfer Milling (3)
-
Face Milling (3)
Cutting Diameter
Cutting Diameter
-
1.969 in (1)
-
2.48 in (1)
-
3.15 in (1)
to
Cutting Diameter
Cutting Diameter
-
50.0 mm (1)
-
63.0 mm (1)
-
80.0 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
63.875 mm (1)
-
76.75 mm (1)
-
93.75 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
2.515 in (1)
-
3.023 in (1)
-
3.692 in (1)
to
Reach
Reach
-
1.575 in (2)
-
1.969 in (1)
to
Reach
Reach
-
40.0 mm (2)
-
50.0 mm (1)
to
Number of Flutes
Number of Flutes
-
4 (1)
-
5 (1)
-
6 (1)
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
KC725M (3)
-
KCSM30 (3)
Back-End
Back-End Diameter
Back-End Diameter
-
22.0 mm (2)
-
27.0 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.866 in (2)
-
1.063 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 3
of 3 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D6] Hub Diameter | [D6] Hub Diameter | [L] Overall Length | [L] Overall Length | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4137779 | 50A04RS45SE14BB | 50A04RS45SE14BB | 50.0000 | 1.969 | 63.8800 | 2.515 | 22.0 | .8661 | 50.0000 | 1.969 | 40.0000 | 1.570 | 6.6000 | .2600 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$607.09
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4137780 | 63A05RS45SE14BB | 63A05RS45SE14BB | 63.0000 | 2.480 | 76.7500 | 3.022 | 22.0 | .8661 | 50.0000 | 1.969 | 40.0000 | 1.570 | 6.6000 | .2600 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$705.20
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4137781 | 80A06RS45SE14BB | 80A06RS45SE14BB | 80.0000 | 3.150 | 93.7600 | 3.691 | 27.0 | 1.063 | 60.0000 | 2.362 | 50.0000 | 1.970 | 6.6000 | .2600 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$825.70
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Insert Selection Guide
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| (Light geometry) | – | (Strong geometry) | ||||
| wear resistance |  <="" td=""> | toughness | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | .E..GD2 | KC725M | .E..GN | KC725M | .S..GN | KC725M |
| H1 | – | – | – | – | – | – |
Recommended Starting Feeds [mm]
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GD2 | 0,17 | 0,26 | 0,36 | 0,12 | 0,19 | 0,27 | 0,11 | 0,17 | 0,24 | 0,10 | 0,16 | 0,22 | 0,10 | 0,15 | 0,22 | .E..GD2 |
| .E..GN | 0,17 | 0,26 | 0,36 | 0,12 | 0,19 | 0,27 | 0,11 | 0,17 | 0,24 | 0,10 | 0,16 | 0,22 | 0,10 | 0,15 | 0,22 | .E..GN |
| .S..GN | 0,21 | 0,31 | 0,44 | 0,15 | 0,23 | 0,33 | 0,13 | 0,20 | 0,29 | 0,13 | 0,19 | 0,27 | 0,12 | 0,18 | 0,26 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Feeds [IPT]
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GD2 | .007 | .010 | .014 | .005 | .008 | .011 | .004 | .007 | .009 | .004 | .006 | .009 | .004 | .006 | .008 | .E..GD2 |
| .E..GN | .007 | .010 | .014 | .005 | .008 | .011 | .004 | .007 | .009 | .004 | .006 | .009 | .004 | .006 | .008 | .E..GN |
| .S..GN | .008 | .012 | .018 | .006 | .009 | .013 | .005 | .008 | .011 | .005 | .007 | .011 | .005 | .007 | .010 | .S..GN |
Recommended Starting Speeds [m/min]
| Material Group | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1–2 | – | – | – |
| 3 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 75 | 55 | 35 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1–2 | – | – | – |
| 3 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 240 | 180 | 120 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |