successfully added to cart
View Cart

Notifications

Mark all as read
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts

CNMG-MG

Kenloc™ Inserts

Features and benefits

  • Beyond™ Drive™ grades included.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
Applications
Applications
  • ID Thread Turning ID Thread Turning (1)
Corner configuration
Corner Radius
Corner Radius
  • 0.0156 in (1)
  • 0.0313 in (4)
  • 0.0469 in (5)
  • 0.0625 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (1)
  • 0.8 mm (4)
  • 1.2 mm (5)
  • 1.6 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC5010 (1)
  • KC730 (1)
  • KC850 (2)
  • KCP10B (3)
  • KCP25B (4)
Insert Geometry
Insert IC Size
Insert IC Size
  • 12.7 mm (7)
  • 15.875 mm (3)
  • 19.05 mm (1)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.5 in (7)
  • 0.625 in (3)
  • 0.75 in (1)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 12.896 mm (7)
  • 16.12 mm (3)
  • 19.344 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5077 in (7)
  • 0.6346 in (3)
  • 0.7616 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (10)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 11 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1160175 CNMG120404MG CNMG431MG KC850 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
    List price:
    $19.24 /each.
    Your price::
    Qty
    1160176 CNMG120408MG CNMG432MG KC850 12.7000 .5000 12.8960 .5077 4.7630 .1875 0.8000 .0312 5.1600 .2031
      List price:
      $19.24 /each.
      Your price::
      Qty
      1310956 CNMG120408MG CNMG432MG KC5010 12.7000 .5000 12.8960 .5077 4.7630 .1875 0.8000 .0312 5.1600 .2031
        List price:
        $19.24 /each.
        Your price::
        Qty
        5989965 CNMG120408MG CNMG432MG KCP10B 12.7000 .5000 12.8960 .5077 4.7630 .1875 0.8000 .0312 5.1600 .2031
          List price:
          $19.24 /each.
          Your price::
          Qty
          5989962 CNMG120408MG CNMG432MG KCP25B 12.7000 .5000 12.8960 .5077 4.7630 .1875 0.8000 .0312 5.1600 .2031
            List price:
            $19.24 /each.
            Your price::
            Qty
            5989966 CNMG120412MG CNMG433MG KCP10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 1.2000 .0468 5.1560 .2031
              List price:
              $19.24 /each.
              Your price::
              Qty
              5989963 CNMG120412MG CNMG433MG KCP25B 12.7000 .5000 12.8960 .5077 4.7600 .1875 1.2000 .0468 5.1560 .2031
                List price:
                $19.24 /each.
                Your price::
                Qty
                1159608 CNMG160612MG CNMG543MG KC730 15.8750 .6250 16.1200 .6346 6.3500 .2500 1.2000 .0468 6.3500 .2500
                  List price:
                  $31.22 /each.
                  Your price::
                  Qty
                  6151525 CNMG160612MG CNMG543MG KCP25B 15.8750 .6250 16.1200 .6346 6.3500 .2500 1.2000 .0468 6.3500 .2500
                    List price:
                    $31.22 /each.
                    Your price::
                    Qty
                    5904367 CNMG160616MG CNMG544MG KCP10B 15.8750 .6250 16.1200 .6346 6.3500 .2500 1.6000 .0625 6.3500 .2500
                      List price:
                      $31.22 /each.
                      Your price::
                      Qty
                      6151527 CNMG190612MG CNMG643MG KCP25B 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.2000 .0468 7.9300 .3125
                        List price:
                        $39.72 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        Grades

                        • KC5010

                          Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
                          Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

                          P Steel
                          S High-Temp Alloys
                          M Stainless Steel
                        • KC5410

                          • TiB2-PVD coating over a very deformation-resistant unalloyed substrate.

                          • Designed for roughing, semifinishing, and finishing of free machining (hypoeutectic <12,2% Si) aluminum, aluminum alloys, and magnesium alloys.

                          • High hardness and extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance.

                          • Prevents built-up edge because of a very low affinity for aluminum.

                          N Non-Ferrous
                        • KC720

                          • TiN-PVD-coated carbide.

                          • Particularly high-impact strength grade.

                          • For all steels, stainless steels, super-alloys, and titanium.

                          • First choice for difficult conditions such as interrupted cutting, unstable clamping, etc.

                        • KC730

                          KC730

                          P Steel
                          S High-Temp Alloys
                          M Stainless Steel
                        • KC7310

                          PVD-TiAIN coated, unalloyed carbide
                          Good Wear resistance
                          High level of resistance against plastic deformation
                          Smaller rounded edges in comparison with CVD grades
                          Recommended finishing grade for stainless steel


                        • KC810

                          KC810

                        • KC850

                          composition: A CVD tri-phase coating on an extra-strong, cobalt-enriched
                          alloyed substrate.
                          application: Designed for heavy cutting of low-, medium-, and high-carbon
                          steels, medium hardness alloy and tool steels, stainless steels, and some
                          high-temperature alloys. Excellent thermal and mechanical shock resistance
                          makes grade KC850 ideally suited for difficult drilling applications.
                          Used in inserts for Kendex/Metcut drill bodies.

                          P Steel
                          M Stainless Steel
                        • KC9010
                        • KC9025
                        • KC910
                        • KC9110

                          Composition: Specially engineered, cobalt-enriched carbide grade with thick K-MTCVD-TiCN coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for maximum abrasion and wear resistance for high-speed machining.
                          Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. A balanced combination of deformation resistance and edge toughness. The smooth coating resists built-up edge and microchipping. For rougher cutting, use the KC9125 grade.

                        • KC9120
                        • KC9140

                          composition. A newly engineered, tough carbide grade with an advance multi-layered TiN-MT-TiCN-Al203-TiN coating.
                          Application. For heavy roughing applications of alloy steels where insert edge strength is critical. A specially designed coating ensures excellent interlayer adhesion and long tool length.

                        • KC9145
                        • KC935

                          KC935

                        • KC950

                          KC950

                        • KC990
                        • KCP10B

                          Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                          Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                          P Steel
                          K Cast Iron
                        • KCP25B

                          Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                          Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                          P Steel
                          K Cast Iron
                        product-image
                        Please adjust the following properties from

                        ISO Catalog Number

                        ANSI Catalog Number

                        to find similar products.
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        The following CAD files are available

                        Please select a file to download

                        You should be logged to see your dashboard information
                        Session expired due to inactivity, please login again
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart