KSSM 90° End Mill SD12 • Metric
Product Similar To:
KSSM 90° End Mill SD12 • Metric
Roughing Flat Bottom Indexable
Material Number100016835
Contact our sales team to discover all of your pricing options
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: Flat Bottom
Drilling: Convex
Plunge Milling
Milling - Through Coolant
Counter Boring
Drilling: Concave
Chain Drilling
| Material Group | Light | General | Heavy | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1 | ||||||
| P3 | ||||||
| P5 | .S..GDZ | KCPK30 | .E..HPZ | KCPM20 | .S..HPZ | KCPM20 |
| M1 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KCPK30 |
| M3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| K1 | ||||||
| K3 | ||||||
| N1 | ||||||
| N3 | ||||||
| S1 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC522M |
| S3 | .S..GDZ | KC725M | .E..HPZ | KC725M | .S..HPZ | KC725M |
| S4 | .E..HPZ | KC725M | .S..HPZ | KC725M | ||
| H1 | ||||||
Recommended Starting Feeds [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||
| 50–100% | ||||
| All Inserts | 0,004 | 0,010 | 0,016 | All Inserts |
| Light | General | Heavy |
Recommended Starting Speeds [m/min]
| Material Group | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 160 | 120 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 205 | 180 | 165 | – | – | – | – | – | – |
| 2 | 225 | 190 | 160 | 185 | 160 | 130 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 140 | 120 | 95 | – | – | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 50 | 45 | 35 | 35 | 30 | – | – | – | – | – | – | – |
| 2 | 50 | 45 | 35 | 30 | 30 | – | – | – | – | – | – | – | |
| 3 | 60 | 50 | 35 | 40 | 40 | – | – | – | – | – | – | – | |
| 4 | 85 | 60 | 45 | 50 | 45 | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |