Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
KTMD U Style Cutter 3/8" iC Shell Mill
KTMD • U Style • 3/8" IC • Cutter Bodies
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (1)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
-
-
M Stainless Steel (1)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
-
-
K Cast Iron (1)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
-
-
S High-Temp Alloys (1)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
Applications
Thread Milling
;
-
Pipe Thread (1)
-
Shoulder Bottom Shoulder (1)
-
Shoulder Roughing (1)
-
-
Thread Milling (1)
-
Threading (1)
Cutting Diameter
2.205 in
;
-
2.205 in (1)
to
Cutting Diameter
56.0 mm
;
-
56.0 mm (1)
to
Corner Radius
Corner Radius
-
0.002 in (1)
-
0.003 in (1)
-
0.006 in (1)
-
0.01 in (1)
-
0.011 in (1)
to
Corner Radius
Corner Radius
-
0.05 mm (1)
-
0.076 mm (1)
-
0.151 mm (1)
-
0.25 mm (1)
-
0.275 mm (1)
to
Application
Grade Of Cutting Tool
KC610M
;
KC635M
;
-
KC610M (1)
-
KC635M (1)
Front-End
Thread Pitch
6.0 mm
;
-
2.0 mm (1)
-
3.5 mm (1)
-
6.0 mm (1)
to
Thread Pitch
0.237 in
;
-
0.079 in (1)
-
0.138 in (1)
-
0.237 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 1
of 1 results
Metric
Inch
Show
-
- Applied Filters:
- Clear all filters
-
X Applications:
-
X Cutting Diameter = 2.205 in
-
X Cutting Diameter = 56.0 mm
-
X Display Obsolete Products: true
-
X Thread Pitch = 0.237 in
-
X Thread Pitch = 6.0 mm
-
X Workpiece Material: K
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D2] Maximum Body Diameter | [D2] Maximum Body Diameter | [D6] Hub Diameter | [D6] Hub Diameter | [L] Overall Length | [L] Overall Length | [LF] Functional Length | [LF] Functional Length | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5593138 | KTMDUSD56L400Z6 | KTMDUSD56L400Z6 | 56.0000 | 2.204 | 22.0 | .8661 | 48.0000 | 1.889 | 47.2000 | 1.858 | 39.8000 | 1.566 | 32.0000 | 1.259 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$929.01
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
KTMD • 3/8" IC
| Materiały obrabiane | wg skali Brinella | szybkość skrawania | płytki wymienne | |
| stal | HB | KC610M | KC635M | posuw fz (mm/ostrze) |
| P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
| P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
| P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
| P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
| P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
| P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
| Stal nierdzewna | ||||
| M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
| M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
| M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
| żeliwo | ||||
| K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
| K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
| K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
| materiały nieżelazne | ||||
| N1 | 60–100 | 100–250 | – | 0,05–0,25 |
| stopy żarowytrzymałe | ||||
| S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
| S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
| S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
| S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
| stal hartowana | ||||
| H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |
KTMD • 3/8" IC
| Materiały obrabiane | wg skali Brinella | szybkość skrawania | płytki wymienne | |
| stal | HB | KC610M | KC635M | posuw fz (mm/ostrze) |
| P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
| P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
| P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
| P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
| P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
| P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
| Stal nierdzewna | ||||
| M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
| M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
| M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
| żeliwo | ||||
| K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
| K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
| K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
| materiały nieżelazne | ||||
| N1 | 60–100 | 100–250 | – | 0,05–0,25 |
| stopy żarowytrzymałe | ||||
| S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
| S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
| S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
| S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
| stal hartowana | ||||
| H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |
| Zastosowanie gwintu w zależności od oprawki | |||||||
| min. średnica gwintu | |||||||
| oprawka | D1 mm | ISO (obróbka zgrubna) | ISO (obróbka bardzo dokładna) | Zarys częściowy 55° | |||
| KTMDUSD42L400Z4 | |||||||
| KTMDUSD48L400Z5 | |||||||
| KTMDUSD56L400Z6 | |||||||