Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

KSEM™ Modular Drill for the Intermediate Diameter Range

The KSEM modular drill covers drilling applications in a diameter range of 12,5-40mm (.4921 – 1.5748”) up to 10 x D. KSEM enables maximum feed rates for highest productivity.

With four large contact surfaces, the insert pocket seat provides maximum stability, even in challenging conditions like stacked plates, cross holes, and inclined exits.

The central locking screw mechanism ensures secure clamping of the insert, resulting in process safety and long tool life for both the drill body and the insert. Material specific point geometries provide versatility in a wide range of materials.

The KSEM carbide inserts can be reconditioned, further extending the tool life, reducing tool inventory and tool cost. 

HPCCL geometry for cast iron. With corner chamfer for wear protection and smooth hole exit. Four margin lands for perfect hole straightness.

HPG geometry for alloyed steels. With straight cutting edge for maximum stability in short chipping steels and interrupted cuts.

HP geometry for long chipping steels. With curved cutting edge for optimum chip formation.

HPL geometry for stainless steels. The innovative cutting geometry creates two chips in each chip flute for perfect chip evacuation.

PC geometry for piloting in all materials.

FEG geometry for flat bottom hole drilling, and piloting on inclined entries in steels and cast iron.

SPL geometry for low cutting forces in high temperature alloys, and non-ferrous materials. Four-facet geometry with four margin lands for perfect centering and hole straightness.

With four large contact surfaces, the insert pocket seat provides maximum stability, even in challenging conditions like stacked plates, cross holes, and inclined exits.

The KSEM modular drill covers drilling applications in a diameter range
of 12,5-40mm (.4921 – 1.5748”) up to 10 x D.

The central locking screw mechanism ensures secure clamping of the insert, resulting in process safety and long tool life for both the drill body and the insert.

Internal coolant supply directly to the cutting zone, for extended tool life and efficient chip evacuation.

Browse KSEM Products

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (1589)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1589)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1589)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1589)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1589)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1270)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1270)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1231)
  • M Stainless Steel (1133)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1133)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1133)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1133)
  • K Cast Iron (1151)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1151)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1151)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1151)
  • N Non-Ferrous Materials (1016)
    • N1
      Wrought Aluminum
      (1016)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1016)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1016)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1016)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (928)
    • N6
      Carbon, Graphite Composites, CFRP
      (928)
    • N7
      MMC's
      (928)
  • S High-Temp Alloys (1016)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1016)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1016)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1016)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1016)
  • H Hardened Materials (39)
    • H1
      Hardened Materials 44-48 HRC
      (39)
    • H2
      Hardened Materials 48-55 HRC
      (39)
    • H3
      Hardened Materials 56-60 HRC
      (39)
    • H4
      Hardened Materials >60 HRC
      (39)
Select First Choice
  • CN (265)
  • DE (245)
  • GB (197)
  • IN (147)
  • US (258)
Applications
  • Convex Drilling Convex Drilling (631)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (631)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (631)
  • Counterboring Counterboring (631)
  • Countersinking Countersinking (631)
  • Drilling Drilling (631)
  • Flat Bottom Drilling Flat Bottom Drilling (631)
  • ID Thread Turning ID Thread Turning (998)
  • Inclined Entry Drilling Inclined Entry Drilling (631)
  • Inclined Exit Drilling Inclined Exit Drilling (631)
  • Pre-Condition Pre-Condition (592)
  • Stacked Plates Drilling Stacked Plates Drilling (631)
  • X-Offset Drilling X-Offset Drilling (631)
Cutting Diameter
  • 12.5 (33)
  • 12.6 (27)
  • 12.7 (32)
  • 12.8 (29)
  • 12.93 (29)
  • 13.0 (41)
  • 13.1 (32)
  • 13.2 (30)
  • 13.5 (33)
  • 13.6 (21)
  • 13.7 (19)
  • 13.8 (21)
  • 13.89 (21)
  • 14.0 (34)
  • 14.1 (26)
  • 14.15 (21)
  • 14.2 (24)
  • 14.29 (27)
  • 14.4 (17)
  • 14.5 (28)
  • 14.6 (19)
  • 14.68 (21)
  • 14.8 (20)
  • 15.0 (41)
  • 15.08 (31)
  • 15.3 (24)
  • 15.48 (25)
  • 15.5 (34)
  • 15.6 (20)
  • 15.7 (19)
  • 15.8 (20)
  • 15.875 (12)
  • 15.88 (17)
  • 16.0 (34)
  • 16.04 (25)
  • 16.09 (31)
  • 16.1 (25)
  • 16.15 (26)
  • 16.19 (25)
  • 16.2 (29)
  • 16.27 (31)
  • 16.5 (34)
  • 16.6 (22)
  • 16.67 (23)
  • 17.0 (37)
  • 17.07 (29)
  • 17.35 (20)
  • 17.46 (26)
  • 17.5 (36)
  • 17.6 (21)
  • 17.7 (20)
  • 17.75 (20)
  • 17.8 (20)
  • 17.86 (24)
  • 17.9 (20)
  • 18.0 (26)
  • 18.26 (17)
  • 18.3 (12)
  • 18.39 (12)
  • 18.5 (28)
  • 18.6 (17)
  • 18.65 (20)
  • 18.8 (12)
  • 18.9 (12)
  • 19.0 (47)
  • 19.05 (41)
  • 19.2 (33)
  • 19.228 (34)
  • 19.23 (31)
  • 19.25 (34)
  • 19.27 (37)
  • 19.32 (31)
  • 19.35 (32)
  • 19.36 (31)
  • 19.38 (31)
  • 19.45 (37)
  • 19.5 (49)
  • 19.65 (22)
  • 19.7 (22)
  • 19.84 (24)
  • 20.0 (22)
  • 20.03 (12)
  • 20.1 (13)
  • 20.24 (19)
  • 20.35 (13)
  • 20.5 (32)
  • 20.64 (25)
  • 20.7 (19)
  • 21.0 (32)
  • 21.1 (20)
  • 21.15 (15)
  • 21.2 (15)
  • 21.33 (16)
  • 21.43 (20)
  • 21.5 (30)
  • 21.7 (18)
  • 21.83 (22)
  • 22.0 (26)
  • 22.1 (27)
  • 22.15 (26)
  • 22.23 (32)
  • 22.44 (31)
  • 22.5 (38)
  • 22.62 (27)
  • 22.77 (14)
  • 23.0 (30)
  • 23.05 (17)
  • 23.1 (17)
  • 23.25 (17)
  • 23.3 (17)
  • 23.42 (22)
  • 23.5 (36)
  • 23.6 (19)
  • 23.7 (20)
  • 23.81 (25)
  • 24.0 (29)
  • 24.3 (7)
  • 24.5 (26)
  • 24.61 (21)
  • 24.7 (16)
  • 25.0 (53)
  • 25.07 (39)
  • 25.25 (33)
  • 25.3 (33)
  • 25.4 (41)
  • 25.5 (41)
  • 25.54 (33)
  • 25.6 (30)
  • 25.61 (28)
  • 25.65 (28)
  • 25.654 (28)
  • 25.67 (33)
  • 25.72 (27)
  • 25.76 (27)
  • 25.8 (27)
  • 25.806 (27)
  • 25.81 (30)
  • 26.0 (27)
  • 26.19 (20)
  • 26.3 (13)
  • 26.5 (28)
  • 26.53 (15)
  • 26.59 (21)
  • 26.7 (14)
  • 27.0 (32)
  • 27.5 (29)
  • 27.78 (19)
  • 27.781 (1)
  • 28.0 (27)
  • 28.1 (11)
  • 28.18 (16)
  • 28.35 (11)
  • 28.5 (30)
  • 28.58 (24)
  • 29.0 (34)
  • 29.37 (19)
  • 29.5 (28)
  • 29.55 (16)
  • 29.73 (16)
  • 29.77 (21)
  • 30.0 (24)
  • 30.16 (20)
  • 30.5 (32)
  • 30.56 (23)
  • 30.96 (17)
  • 31.0 (27)
  • 31.15 (13)
  • 31.25 (13)
  • 31.5 (32)
  • 31.75 (29)
  • 32.0 (35)
  • 32.2 (10)
  • 32.34 (10)
  • 32.5 (21)
  • 32.54 (20)
  • 32.94 (18)
  • 33.0 (31)
  • 33.34 (24)
  • 33.4 (21)
  • 33.5 (28)
  • 33.73 (22)
  • 34.0 (34)
  • 34.13 (26)
  • 34.5 (29)
  • 34.93 (26)
  • 35.0 (34)
  • 35.5 (29)
  • 35.72 (28)
  • 36.0 (35)
  • 36.12 (15)
  • 36.5 (18)
  • 36.51 (18)
  • 37.0 (28)
  • 37.31 (21)
  • 37.313 (1)
  • 37.5 (22)
  • 38.0 (34)
  • 38.1 (29)
  • 38.46 (27)
  • 38.5 (25)
  • 39.0 (33)
  • 39.2 (21)
  • 39.5 (21)
  • 39.75 (17)
  • 40.0 (29)
to
Cutting Diameter
  • 0.4921 (33)
  • 0.4961 (27)
  • 0.5 (32)
  • 0.5039 (29)
  • 0.509 (28)
  • 0.5091 (24)
  • 0.5118 (41)
  • 0.5157 (29)
  • 0.516 (30)
  • 0.5197 (30)
  • 0.531 (30)
  • 0.5315 (27)
  • 0.5354 (21)
  • 0.5394 (19)
  • 0.5433 (21)
  • 0.5469 (16)
  • 0.547 (20)
  • 0.5512 (34)
  • 0.5551 (26)
  • 0.5571 (21)
  • 0.5591 (24)
  • 0.5626 (22)
  • 0.563 (25)
  • 0.5669 (17)
  • 0.5709 (28)
  • 0.5748 (19)
  • 0.578 (21)
  • 0.5827 (20)
  • 0.5906 (41)
  • 0.5937 (28)
  • 0.594 (29)
  • 0.6024 (24)
  • 0.609 (24)
  • 0.6094 (22)
  • 0.6102 (34)
  • 0.6142 (20)
  • 0.6181 (19)
  • 0.622 (20)
  • 0.625 (16)
  • 0.6252 (13)
  • 0.6299 (34)
  • 0.6315 (25)
  • 0.6335 (26)
  • 0.6339 (25)
  • 0.634 (29)
  • 0.6358 (26)
  • 0.6374 (25)
  • 0.6378 (29)
  • 0.6406 (26)
  • 0.641 (29)
  • 0.6496 (34)
  • 0.6535 (22)
  • 0.656 (21)
  • 0.6563 (18)
  • 0.6693 (37)
  • 0.672 (29)
  • 0.6831 (20)
  • 0.6874 (21)
  • 0.6875 (24)
  • 0.688 (19)
  • 0.689 (36)
  • 0.6929 (21)
  • 0.6969 (20)
  • 0.6988 (20)
  • 0.7008 (20)
  • 0.703 (22)
  • 0.7031 (21)
  • 0.7047 (20)
  • 0.7087 (26)
  • 0.7189 (14)
  • 0.719 (14)
  • 0.7205 (12)
  • 0.724 (12)
  • 0.7283 (28)
  • 0.7323 (17)
  • 0.734 (20)
  • 0.7402 (12)
  • 0.7441 (12)
  • 0.748 (47)
  • 0.75 (41)
  • 0.7559 (33)
  • 0.757 (34)
  • 0.7571 (31)
  • 0.7579 (34)
  • 0.7587 (32)
  • 0.759 (35)
  • 0.7606 (31)
  • 0.7618 (32)
  • 0.7622 (31)
  • 0.763 (31)
  • 0.7657 (35)
  • 0.766 (32)
  • 0.7677 (49)
  • 0.7736 (22)
  • 0.7756 (22)
  • 0.781 (21)
  • 0.7811 (19)
  • 0.7874 (22)
  • 0.7886 (12)
  • 0.7913 (13)
  • 0.7969 (16)
  • 0.797 (15)
  • 0.8012 (13)
  • 0.8071 (32)
  • 0.8125 (23)
  • 0.8126 (20)
  • 0.815 (19)
  • 0.8268 (32)
  • 0.8307 (20)
  • 0.8327 (15)
  • 0.8346 (15)
  • 0.8398 (16)
  • 0.8437 (15)
  • 0.844 (19)
  • 0.846 (27)
  • 0.8465 (24)
  • 0.8543 (18)
  • 0.859 (22)
  • 0.8661 (26)
  • 0.8701 (27)
  • 0.872 (26)
  • 0.875 (28)
  • 0.8752 (29)
  • 0.8835 (28)
  • 0.884 (28)
  • 0.8858 (38)
  • 0.8906 (27)
  • 0.8965 (14)
  • 0.9055 (30)
  • 0.9075 (17)
  • 0.9094 (17)
  • 0.9154 (17)
  • 0.9173 (17)
  • 0.922 (22)
  • 0.9252 (36)
  • 0.9291 (19)
  • 0.9331 (20)
  • 0.9374 (20)
  • 0.9375 (23)
  • 0.938 (18)
  • 0.9449 (29)
  • 0.9567 (7)
  • 0.9646 (26)
  • 0.9689 (16)
  • 0.969 (20)
  • 0.9724 (16)
  • 0.9843 (53)
  • 0.987 (39)
  • 0.9941 (33)
  • 0.9961 (33)
  • 1.0 (41)
  • 1.0039 (41)
  • 1.0055 (33)
  • 1.0079 (27)
  • 1.008 (31)
  • 1.0098 (28)
  • 1.01 (28)
  • 1.0106 (31)
  • 1.011 (28)
  • 1.0126 (27)
  • 1.0142 (27)
  • 1.0157 (27)
  • 1.016 (27)
  • 1.0161 (30)
  • 1.0236 (27)
  • 1.031 (17)
  • 1.0311 (15)
  • 1.0354 (13)
  • 1.0433 (28)
  • 1.0445 (15)
  • 1.0469 (16)
  • 1.047 (19)
  • 1.0512 (14)
  • 1.063 (32)
  • 1.0827 (29)
  • 1.0937 (14)
  • 1.094 (30)
  • 1.1024 (27)
  • 1.1063 (11)
  • 1.109 (15)
  • 1.1161 (11)
  • 1.122 (30)
  • 1.125 (23)
  • 1.1252 (18)
  • 1.1417 (34)
  • 1.1563 (19)
  • 1.1614 (28)
  • 1.1634 (16)
  • 1.1705 (16)
  • 1.172 (21)
  • 1.1811 (24)
  • 1.1875 (20)
  • 1.2008 (32)
  • 1.203 (23)
  • 1.219 (17)
  • 1.2205 (27)
  • 1.2264 (13)
  • 1.2303 (13)
  • 1.2402 (32)
  • 1.25 (29)
  • 1.2598 (35)
  • 1.2677 (10)
  • 1.2732 (10)
  • 1.2795 (21)
  • 1.281 (18)
  • 1.2811 (17)
  • 1.297 (18)
  • 1.2992 (31)
  • 1.313 (25)
  • 1.3189 (28)
  • 1.328 (22)
  • 1.3386 (34)
  • 1.344 (26)
  • 1.3583 (29)
  • 1.375 (26)
  • 1.378 (34)
  • 1.3976 (29)
  • 1.406 (28)
  • 1.4173 (35)
  • 1.422 (15)
  • 1.437 (16)
  • 1.4374 (16)
  • 1.4375 (18)
  • 1.4567 (28)
  • 1.469 (22)
  • 1.4764 (22)
  • 1.4961 (34)
  • 1.5 (29)
  • 1.514 (24)
  • 1.5142 (25)
  • 1.5157 (25)
  • 1.5354 (33)
  • 1.5433 (21)
  • 1.5551 (21)
  • 1.565 (17)
  • 1.5748 (29)
to
Maximum Hole Depth [L4]
  • 0.53 (1)
  • 0.5315 (3)
  • 0.5709 (3)
  • 0.61 (1)
  • 0.622 (2)
  • 0.6299 (1)
  • 0.63 (1)
  • 0.7079 (1)
  • 0.7087 (4)
  • 0.71 (1)
  • 0.7165 (1)
  • 0.7219 (1)
  • 0.78 (1)
  • 0.7811 (2)
  • 0.7874 (1)
  • 0.8127 (1)
  • 0.8661 (3)
  • 0.87 (1)
  • 0.9449 (4)
  • 0.95 (1)
  • 1.02 (1)
  • 1.0236 (3)
  • 1.042 (1)
  • 1.1024 (5)
  • 1.11 (1)
  • 1.18 (1)
  • 1.1811 (4)
  • 1.2598 (2)
  • 1.26 (1)
  • 1.27 (1)
  • 1.3721 (1)
  • 1.4173 (4)
  • 1.42 (1)
  • 1.5 (3)
  • 1.527 (2)
  • 1.5469 (1)
  • 1.57 (1)
  • 1.5748 (4)
  • 1.5938 (2)
  • 1.6406 (2)
  • 1.6535 (5)
  • 1.6875 (2)
  • 1.7344 (2)
  • 1.7813 (2)
  • 1.8281 (2)
  • 1.875 (1)
  • 1.8898 (6)
  • 1.902 (1)
  • 1.9219 (1)
  • 1.9688 (1)
  • 2.0156 (1)
  • 2.05 (3)
  • 2.0625 (1)
  • 2.1094 (1)
  • 2.126 (5)
  • 2.13 (1)
  • 2.1563 (1)
  • 2.2031 (1)
  • 2.25 (2)
  • 2.2755 (1)
  • 2.2969 (1)
  • 2.3438 (1)
  • 2.36 (5)
  • 2.3622 (6)
  • 2.3906 (1)
  • 2.4375 (1)
  • 2.5 (3)
  • 2.5313 (1)
  • 2.545 (2)
  • 2.5781 (3)
  • 2.5984 (5)
  • 2.6 (1)
  • 2.625 (2)
  • 2.652 (1)
  • 2.6562 (1)
  • 2.6563 (1)
  • 2.7188 (1)
  • 2.7344 (2)
  • 2.7559 (5)
  • 2.7656 (1)
  • 2.811 (1)
  • 2.8125 (2)
  • 2.83 (3)
  • 2.8346 (7)
  • 2.8898 (1)
  • 2.8906 (1)
  • 2.9063 (1)
  • 2.9531 (1)
  • 2.9688 (2)
  • 3.0 (2)
  • 3.033 (1)
  • 3.0469 (2)
  • 3.07 (2)
  • 3.0709 (7)
  • 3.0938 (1)
  • 3.1496 (7)
  • 3.1875 (1)
  • 3.2813 (1)
  • 3.3071 (5)
  • 3.31 (3)
  • 3.3281 (1)
  • 3.375 (1)
  • 3.4688 (1)
  • 3.5 (2)
  • 3.5156 (1)
  • 3.54 (6)
  • 3.5433 (12)
  • 3.5625 (1)
  • 3.563 (1)
  • 3.6092 (1)
  • 3.6563 (1)
  • 3.7188 (1)
  • 3.75 (2)
  • 3.7614 (1)
  • 3.7795 (6)
  • 3.78 (3)
  • 3.8281 (1)
  • 3.8438 (1)
  • 3.8583 (4)
  • 3.8906 (1)
  • 3.8976 (2)
  • 3.898 (3)
  • 3.937 (11)
  • 3.9375 (2)
  • 3.94 (3)
  • 3.9844 (1)
  • 4.0157 (1)
  • 4.016 (3)
  • 4.0469 (1)
  • 4.125 (1)
  • 4.1339 (1)
  • 4.134 (3)
  • 4.1562 (1)
  • 4.1853 (1)
  • 4.2188 (1)
  • 4.252 (4)
  • 4.2656 (1)
  • 4.3125 (1)
  • 4.33 (2)
  • 4.3307 (6)
  • 4.37 (3)
  • 4.3701 (2)
  • 4.4063 (1)
  • 4.4094 (6)
  • 4.488 (2)
  • 4.4882 (1)
  • 4.5 (1)
  • 4.542 (1)
  • 4.59 (1)
  • 4.606 (3)
  • 4.6063 (1)
  • 4.72 (2)
  • 4.724 (1)
  • 4.7244 (13)
  • 4.9213 (1)
  • 4.9606 (6)
  • 5.0 (2)
  • 5.06 (1)
  • 5.09 (1)
  • 5.1181 (14)
  • 5.156 (1)
  • 5.3125 (1)
  • 5.315 (2)
  • 5.4149 (1)
  • 5.4688 (1)
  • 5.5 (1)
  • 5.51 (2)
  • 5.5118 (17)
  • 5.625 (1)
  • 5.7087 (2)
  • 5.7813 (1)
  • 5.9055 (9)
  • 5.91 (2)
  • 5.9375 (1)
  • 6.0 (2)
  • 6.063 (6)
  • 6.0938 (1)
  • 6.1024 (1)
  • 6.25 (1)
  • 6.299 (1)
  • 6.2992 (13)
  • 6.3 (1)
  • 6.34 (1)
  • 6.4055 (2)
  • 6.484 (2)
  • 6.4961 (4)
  • 6.5 (1)
  • 6.5625 (1)
  • 6.5629 (1)
  • 6.563 (1)
  • 6.61 (1)
  • 6.6142 (8)
  • 6.6417 (1)
  • 6.642 (1)
  • 6.6929 (3)
  • 6.72 (2)
  • 6.874 (2)