successfully added to cart
View Cart

Notifications

Mark all as read

Ceramic Mills

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Face Milling Face Milling (46)
  • Pocket Pocket (23)
  • Pocket Milling Pocket Milling (23)
  • Profile Milling Profile Milling (32)
  • Ramping Ramping (23)
  • Shoulder Ball Nose Shoulder Ball Nose (27)
  • Shoulder Milling Shoulder Milling (33)
  • Shoulder Roughing Shoulder Roughing (20)
  • Slot Ball Nose Slot Ball Nose (19)
  • Slot Milling Slot Milling (33)
Workpiece Material
  • P Steel (46)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (46)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (46)
  • M Stainless Steel (23)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (23)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (23)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (23)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
  • S High-Temp Alloys (60)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (57)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (60)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (60)
  • H Hardened Materials (27)
    • H1
      Hardened Materials 44-48 HRC
      (27)
    • H2
      Hardened Materials 48-55 HRC
      (1)
    • H3
      Hardened Materials 56-60 HRC
      (1)
Maximum Cutting Diameter
  • 0.625 (1)
  • 0.629 (1)
  • 0.75 (1)
  • 0.787 (4)
  • 0.984 (2)
  • 1.0 (2)
  • 1.25 (3)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.5 (2)
  • 1.5748 (2)
  • 1.5758 (1)
  • 1.9685 (4)
  • 2.0 (4)
  • 2.4803 (3)
  • 2.5 (4)
  • 3.0 (4)
  • 3.1496 (3)
  • 3.937 (1)
  • 4.0 (1)
  • 4.9213 (1)
  • 6.2992 (1)
to
Maximum Cutting Diameter
  • 15.875 (1)
  • 16.0 (1)
  • 19.05 (1)
  • 20.0 (4)
  • 25.0 (2)
  • 25.4 (2)
  • 31.75 (3)
  • 32.0 (2)
  • 38.1 (2)
  • 40.0 (3)
  • 50.0 (4)
  • 50.8 (4)
  • 63.0 (3)
  • 63.5 (4)
  • 76.2 (4)
  • 80.0 (3)
  • 100.0 (1)
  • 101.6 (1)
  • 125.0 (1)
  • 160.0 (1)
to
Cutting Diameter
  • 9.525 (1)
  • 9.65 (1)
  • 10.5 (2)
  • 12.7 (1)
  • 13.65 (2)
  • 15.5 (2)
  • 15.875 (1)
  • 15.9 (1)
  • 19.05 (1)
  • 19.329 (2)
  • 19.46 (1)
  • 19.57 (1)
  • 25.4 (1)
  • 25.64 (1)
  • 27.3 (2)
  • 27.45 (1)
  • 37.3 (3)
  • 37.417 (1)
  • 38.1 (2)
  • 38.12 (1)
  • 38.22 (1)
  • 50.3 (3)
  • 50.79 (1)
  • 50.8 (2)
  • 50.87 (1)
  • 63.47 (1)
  • 63.5 (2)
  • 63.531 (1)
  • 67.3 (2)
  • 67.364 (1)
  • 87.3 (1)
  • 88.85 (1)
  • 112.3 (1)
  • 147.3 (1)
to
Cutting Diameter
  • 0.375 (1)
  • 0.3799 (1)
  • 0.412 (1)
  • 0.4134 (1)
  • 0.5 (1)
  • 0.537 (1)
  • 0.5374 (1)
  • 0.61 (1)
  • 0.6102 (1)
  • 0.625 (2)
  • 0.75 (1)
  • 0.761 (2)
  • 0.766 (1)
  • 0.77 (1)
  • 1.0 (1)
  • 1.009 (1)
  • 1.0748 (2)
  • 1.081 (1)
  • 1.4685 (3)
  • 1.473 (1)
  • 1.5 (2)
  • 1.501 (1)
  • 1.505 (1)
  • 1.9803 (3)
  • 2.0 (3)
  • 2.003 (1)
  • 2.499 (1)
  • 2.5 (2)
  • 2.501 (1)
  • 2.6496 (2)
  • 2.652 (1)
  • 3.437 (1)
  • 3.498 (1)
  • 4.4213 (1)
  • 5.7992 (1)
to
Cutting Length
  • 0.125 (5)
  • 0.187 (4)
  • 0.1875 (2)
  • 0.249 (21)
  • 0.25 (15)
to
Cutting Length
  • 3.175 (2)
  • 3.18 (3)
  • 4.75 (4)
  • 4.76 (2)
  • 6.0 (6)
  • 6.32 (6)
  • 6.326 (6)
  • 6.33 (3)
  • 6.35 (15)
to
Cutting Condition
  • Smooth Cut (1)
Cutting Condition Material
  • H-All (1)
Reach
  • 23.711 (1)
  • 23.969 (1)
  • 25.93 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 30.28 (1)
  • 31.0 (2)
  • 31.75 (1)
  • 35.0 (1)
  • 38.1 (1)
  • 39.0 (1)
  • 39.52 (1)
  • 40.9 (1)
  • 45.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 79.0 (1)
  • 88.9 (1)
to
Reach
  • 0.9335 (1)
  • 0.9436 (1)
  • 1.0209 (1)
  • 1.0236 (1)
  • 1.181 (2)
  • 1.1921 (1)
  • 1.2205 (2)
  • 1.25 (1)
  • 1.378 (1)
  • 1.5 (1)
  • 1.5354 (1)
  • 1.5559 (1)
  • 1.61 (1)
  • 1.772 (1)
  • 1.929 (1)
  • 1.9685 (1)
  • 3.11 (1)
  • 3.5 (1)
to
Tool Cutting Edge Angle
  • 90.0 (47)
to
Connection Style
  • A-Socket Head Cap Screw (22)
  • B-Cutter Retention Screw (5)
  • Screw-On Connection (6)
  • Straight-Cylindrical (14)
Cutting Edges Per Insert
  • 1.0 (35)
  • 2.0 (27)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 3.175 (7)
  • 4.7625 (11)
  • 6.35 (44)
to
Corner Radius
  • 0.125 (7)
  • 0.1875 (11)
  • 0.25 (44)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Smooth Cut (1)
Drilling Condition Material
  • H-All (1)
Grade Of Cutting Tool
  • K313 (1)
  • KY1540 (16)
  • KY2100 (12)
  • KY4300 (3)
  • KY4400 (1)
  • KYHS10 (23)
  • KYS25 (2)
  • KYS30 (46)
  • KYSM10 (23)
  • KYSP30 (42)
Hand Of Tool
  • R (47)
Maximum Ramp Angle
  • 1.0 (1)
  • 1.95 (1)
  • 2.0 (2)
  • 2.5 (1)
  • 2.87 (1)
  • 3.0 (2)
  • 4.2 (1)
  • 4.233 (1)
  • 4.25 (2)
  • 8.0 (4)
  • 10.0 (3)
  • 12.0 (1)
  • 13.0 (2)
  • 14.0 (1)
to
Wiper Insert
  • N (25)
Front-End
Insert Shape
  • R-ROUND (62)
Center Cutting
Insert Geometry
Shape
  • R-ROUND (25)
Insert IC Size
  • 0.25 (2)
  • 0.375 (5)
  • 0.5 (18)
to
Insert IC Size
  • 6.35 (2)
  • 9.525 (5)
  • 12.7 (18)
to
Chip Breaker CBMD
  • GN (4)
Cutting Tool Material
  • C A (4)
  • C N (20)
  • H W (1)
Tolerance Class
  • G (25)
Back-End
Connection Type
  • CYLINDRICAL (14)
  • SCREW-ON (6)
  • SHELL MILL (27)
Back-End Diameter
  • 0.625 (1)
  • 0.6299 (3)
  • 0.7087 (2)
  • 0.75 (9)
  • 0.7874 (2)
  • 0.8268 (2)
  • 0.8661 (1)
  • 0.8666 (5)
  • 0.9843 (1)
  • 1.0 (5)
  • 1.063 (2)
  • 1.0634 (1)
  • 1.14 (1)
  • 1.1417 (1)
  • 1.25 (4)
  • 1.2598 (2)
  • 1.26 (2)
  • 1.5 (1)
  • 1.5748 (2)
to
Back-End Diameter
  • 15.875 (1)
  • 16.0 (3)
  • 18.0 (2)
  • 19.05 (9)
  • 20.0 (2)
  • 21.0 (2)
  • 22.0 (6)
  • 25.0 (1)
  • 25.4 (5)
  • 27.0 (3)
  • 29.0 (2)
  • 31.74 (1)
  • 31.75 (3)
  • 32.0 (4)
  • 38.1 (1)
  • 40.0 (2)
to
other
Grade
  • K313 (1)
  • KY1540 (4)
  • KY4300 (3)
  • KY4400 (1)
  • KYS25 (2)
  • KYS30 (9)
  • KYSP30 (5)
Platform
  • Ceramic Mills (65)
  • Kendex (7)
Tool Unit
  • I (47)
  • M (50)
Over All Length [L]
  • 44.45 (4)
  • 45.0 (5)
  • 50.0 (9)
  • 50.8 (9)
  • 53.75 (1)
  • 57.0 (1)
  • 62.6 (1)
  • 63.0 (2)
  • 69.5 (1)
  • 74.93 (1)
  • 75.0 (1)
  • 81.28 (1)
  • 82.0 (2)
  • 96.0 (1)
  • 96.52 (1)
  • 101.6 (2)
  • 110.0 (3)
  • 139.7 (2)
to
Over All Length [L]
  • 1.75 (4)
  • 1.7717 (5)
  • 1.9685 (7)
  • 1.969 (2)
  • 2.0 (9)
  • 2.1161 (1)
  • 2.244 (1)
  • 2.4646 (1)
  • 2.48 (2)
  • 2.7362 (1)
  • 2.95 (1)
  • 2.953 (1)
  • 3.2 (1)
  • 3.228 (2)
  • 3.78 (1)
  • 3.8 (1)
  • 4.0 (2)
  • 4.3307 (2)
  • 4.331 (1)
  • 5.5 (2)
to
Head Length [L2]
  • 23.711 (1)
  • 23.969 (1)
  • 25.93 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 30.28 (1)
  • 31.0 (2)
  • 31.75 (1)
  • 35.0 (1)
  • 38.1 (1)
  • 39.0 (1)
  • 39.52 (1)
  • 40.9 (1)
  • 45.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 79.0 (1)
  • 88.9 (1)
to
Head Length [L2]
  • 0.9335 (1)
  • 0.9436 (1)
  • 1.0209 (1)
  • 1.0236 (1)
  • 1.181 (2)
  • 1.1921 (1)
  • 1.2205 (2)
  • 1.25 (1)
  • 1.378 (1)
  • 1.5 (1)
  • 1.5354 (1)
  • 1.5559 (1)
  • 1.61 (1)
  • 1.772 (1)
  • 1.929 (1)
  • 1.9685 (1)
  • 3.11 (1)
  • 3.5 (1)
to
Number of Inserts
  • 2.0 (4)
  • 3.0 (17)
  • 4.0 (9)
  • 5.0 (4)
  • 6.0 (6)
  • 7.0 (1)
  • 8.0 (2)
  • 9.0 (3)
  • 11.0 (1)
to
Insert Hand
  • N (25)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KSSR™ • RNGN..

Shell Mills
(6 Products)
  • Face MillingFace Milling
  • Slotting: Ball NoseSlotting: Ball Nose
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • Milling - Side and FaceMilling - Side and Face
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM Gage Insert
3101760 KSSR050RN12CF03 KSSR050RN12CF03 50.0000 1.968 37.3000 1.468 16.0 .6299 42.0000 1.653 50.0000 1.968 6.0000 .2490 3 0.38 20500 RNGN120700
    List price:
    $331.85 /each.
    Your price::
    Qty
    3101761 KSSR063RN12CF04 KSSR063RN12CF04 63.0000 2.480 50.3000 1.980 22.0 .8661 54.0000 2.126 50.0000 1.968 6.0000 .2490 4 0.60 16600 RNGN120700
      List price:
      $494.42 /each.
      Your price::
      Qty
      3101762 KSSR080RN12CF05 KSSR080RN12CF05 80.0000 3.149 67.3000 2.649 27.0 1.063 64.0000 2.520 50.0000 1.968 6.0000 .2490 5 0.96 13500 RNGN120700
        List price:
        $604.15 /each.
        Your price::
        Qty
        3101763 KSSR100RN12CF06 KSSR100RN12CF06 100.0000 3.937 87.3000 3.437 32.0 1.259 84.0000 3.307 50.0000 1.968 6.0000 .2490 6 1.53 11200 RNGN120700
          List price:
          $699.68 /each.
          Your price::
          Qty
          3101764 KSSR125RN12CF07 KSSR125RN12CF07 125.0000 4.921 112.3000 4.421 40.0 1.574 94.0000 3.701 63.0000 2.480 6.0000 .2490 7 2.70 9000 RNGN120700
            List price:
            $844.46 /each.
            Your price::
            Qty
            3101765 KSSR160RN12CF09 KSSR160RN12CF09 160.0000 6.299 147.3000 5.799 40.0 1.574 114.0000 4.488 63.0000 2.480 6.0000 .2490 9 4.85 7000 RNGN120700
              List price:
              $1,181.53 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              KSSR-RPGN..

              Shell Mills
              (2 Products)
              • Ramping: BlankRamping: Blank
              • Slotting: Ball NoseSlotting: Ball Nose
              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
              • PocketingPocketing
              • Milling - Side and FaceMilling - Side and Face
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM Gage Insert
              3101756 KSSR050RP12CF04 KSSR050RP12CF04 50.0000 1.968 37.4170 1.473 16.0 .6299 44.0000 1.732 50.0000 1.968 6.3260 .2490 4 1.950 0.41 16340 RP_N1204___
                List price:
                $598.62 /each.
                Your price::
                Qty
                3101758 KSSR080RP12CF05 KSSR080RP12CF05 80.0000 3.149 67.3640 2.652 27.0 1.063 60.0000 2.362 50.0000 1.968 6.3260 .2490 5 1.000 1.09 12900 RP_N1204___
                  List price:
                  $742.66 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  KIPR-RP RPGN..

                  Cylindrical End Mills
                  (6 Products)
                  • Ramping: BlankRamping: Blank
                  • Slotting: Ball NoseSlotting: Ball Nose
                  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                  • 3D Profiling3D Profiling
                  • PocketingPocketing
                  • Shank - Cylindrical  PlainShank - Cylindrical Plain
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [L3] Usable Length [L3] Usable Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Coolant Supply Maximum Ramping Angle Weight Kilograms Max RPM Gage Insert
                  3101754 KIPR032RP12CF03 KIPR032RP12CF03 32.0000 1.259 19.5700 .7700 32.0 1.259 110.0000 4.330 110.0000 4.330 50.0000 1.968 50.0000 1.968 6.3260 .2490 3 Y 4.233 0.56 20420 RP_N1204___
                    List price:
                    $330.29 /each.
                    Your price::
                    Qty
                    3101755 KIPR040RP12CF04 KIPR040RP12CF04 40.0000 1.575 27.4500 1.081 32.0 1.26 110.0000 4.331 110.0000 4.331 49.0000 1.929 49.000 1.929 6.3300 .2490 4 Y 2.870 0.62 18260 RP_N1204___
                      List price:
                      $550.18 /each.
                      Your price::
                      Qty
                      3617415 KIPR025RP09CF03 KIPR025RP09CF03 25.0000 .9840 15.5000 .6102 25.0 .9843 96.0000 3.780 96.0000 3.780 39.0000 1.535     4.7500 .1870 3 Y 8.000 0.30 20610 RP_N0903___
                        List price:
                        $398.34 /each.
                        Your price::
                        Qty
                        3617416 KIPR020RP06CF03 KIPR020RP06CF03 20.0000 .7870 13.6500 .5374 20.0 .7874 82.0000 3.228 82.0000 3.228 31.0000 1.220     3.1750 .1250 3 Y 10.000 0.17 33325 RP_N0602___
                          List price:
                          $375.07 /each.
                          Your price::
                          Qty
                          3617418 KIPR016RP06CF02 KIPR016RP06CF02 16.0000 .6290 9.6500 .3799 16.0 .6299 75.0000 2.953 75.0000 2.953 26.0000 1.023     3.1750 .1250 2 Y 14.000 0.10 37260 RP_N0602___
                            List price:
                            $350.36 /each.
                            Your price::
                            Qty
                            4052780 KIPR020RP09CF02 KIPR020RP09CF02 20.0000 .7870 10.5000 .4134 20.0 .7874 82.0000 3.228 82.0000 3.228 31.0000 1.220     4.7500 .1870 2 Y 13.000 0.16 23040 RP_N0903___
                              List price:
                              $366.35 /each.
                              Your price::
                              Qty
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty

                              Sold in pkg. of

                              ORIGINAL PRODUCT

                              KIPR-RP RPGN..

                              Screw-On End Mills
                              (4 Products)
                              • Ramping: BlankRamping: Blank
                              • Slotting: Ball NoseSlotting: Ball Nose
                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                              • 3D Profiling3D Profiling
                              • PocketingPocketing
                              • Shank - Screw-OnShank - Screw-On
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM Gage Insert
                              3101753 KIPR032RP12MF03 KIPR032RP12MF03 32.0000 1.260 19.4600 .7660 29.0 1.14 17.0000 .6690 M16 45.0000 1.772 22.0000 .8640 6.3300 .2490 3 4.200 0.19 20420 RP_N1204__
                                List price:
                                $503.65 /each.
                                Your price::