Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

KDMB Ballnose Platform

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (136)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (75)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (136)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (136)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (136)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (136)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (136)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (136)
  • M Stainless Steel (136)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (136)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (136)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (136)
  • K Cast Iron (151)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (151)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (151)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (151)
  • N Non-Ferrous Materials (91)
    • N1
      Wrought Aluminum
      (91)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (91)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (91)
  • S High-Temp Alloys (107)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (85)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (85)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (102)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (90)
  • H Hardened Materials (127)
    • H1
      Hardened Materials 44-48 HRC
      (121)
    • H2
      Hardened Materials 48-55 HRC
      (125)
    • H3
      Hardened Materials 56-60 HRC
      (125)
Applications
Applications
  • Pocket Pocket (73)
  • Pocket Helical Pocket Helical (73)
  • Pocket Milling Pocket Milling (73)
  • Profile Milling Profile Milling (73)
  • Ramping Ramping (73)
  • Shoulder Ball Nose Shoulder Ball Nose (73)
  • Shoulder Milling Shoulder Milling (73)
  • Slot Ball Nose Slot Ball Nose (73)
  • Slot Milling Slot Milling (73)
Cutting Diameter
Cutting Diameter
  • 0.237 in (4)
  • 0.25 in (3)
  • 0.312 in (2)
  • 0.315 in (5)
  • 0.375 in (4)
  • 0.394 in (5)
  • 0.473 in (8)
  • 0.5 in (5)
  • 0.625 in (2)
  • 0.63 in (8)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (5)
  • 1.0 in (5)
  • 1.25 in (2)
  • 1.26 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.0 mm (4)
  • 6.351 mm (3)
  • 7.926 mm (2)
  • 8.0 mm (5)
  • 9.525 mm (4)
  • 10.0 mm (5)
  • 12.0 mm (8)
  • 12.701 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (8)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (5)
  • 25.401 mm (5)
  • 31.75 mm (2)
  • 32.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (4)
  • 3.176 mm (3)
  • 3.95 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.775 mm (4)
  • 5.0 mm (5)
  • 6.0 mm (8)
  • 6.351 mm (4)
  • 7.95 mm (3)
  • 8.0 mm (8)
  • 9.525 mm (6)
  • 10.0 mm (6)
  • 12.5 mm (5)
  • 12.701 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (4)
  • 0.125 in (3)
  • 0.156 in (2)
  • 0.157 in (5)
  • 0.188 in (4)
  • 0.197 in (5)
  • 0.237 in (8)
  • 0.25 in (4)
  • 0.313 in (3)
  • 0.315 in (8)
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.492 in (5)
  • 0.5 in (5)
  • 0.625 in (2)
  • 0.63 in (3)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.119 in (1)
  • 0.157 in (2)
  • 0.197 in (2)
  • 0.237 in (1)
  • 0.315 in (3)
  • 0.394 in (1)
  • 0.473 in (1)
  • 0.63 in (1)
  • 0.787 in (2)
  • 0.984 in (2)
  • 1.024 in (2)
  • 1.181 in (1)
  • 1.26 in (2)
  • 1.31 in (1)
  • 1.319 in (1)
  • 1.339 in (1)
  • 1.379 in (3)
  • 1.393 in (1)
  • 1.417 in (1)
  • 1.575 in (4)
  • 1.599 in (1)
  • 1.623 in (1)
  • 1.754 in (1)
  • 1.772 in (3)
  • 1.811 in (2)
  • 1.901 in (1)
  • 1.909 in (1)
  • 1.95 in (1)
  • 1.969 in (3)
  • 1.982 in (1)
  • 2.087 in (2)
  • 2.126 in (1)
  • 2.165 in (1)
  • 2.205 in (1)
  • 2.362 in (5)
  • 2.37 in (1)
  • 2.402 in (1)
  • 2.757 in (5)
  • 2.953 in (1)
  • 3.071 in (1)
  • 3.15 in (2)
  • 3.539 in (1)
  • 3.938 in (2)
  • 4.134 in (1)
Reach Min to Reach Max
Reach
Reach
  • 3.0 mm (1)
  • 4.0 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (1)
  • 8.0 mm (3)
  • 10.0 mm (1)
  • 12.0 mm (1)
  • 16.0 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (2)
  • 26.0 mm (2)
  • 30.0 mm (1)
  • 32.0 mm (2)
  • 33.275 mm (1)
  • 33.5 mm (1)
  • 34.0 mm (1)
  • 35.0 mm (3)
  • 35.35 mm (1)
  • 36.0 mm (1)
  • 40.0 mm (4)
  • 40.625 mm (1)
  • 41.225 mm (1)
  • 44.526 mm (1)
  • 45.0 mm (3)
  • 46.0 mm (2)
  • 48.276 mm (1)
  • 48.5 mm (1)
  • 49.526 mm (1)
  • 50.0 mm (3)
  • 50.35 mm (1)
  • 53.0 mm (2)
  • 54.0 mm (1)
  • 55.0 mm (1)
  • 56.0 mm (1)
  • 60.0 mm (5)
  • 60.2 mm (1)
  • 61.0 mm (1)
  • 70.0 mm (5)
  • 75.0 mm (1)
  • 78.0 mm (1)
  • 80.0 mm (2)
  • 89.9 mm (1)
  • 100.0 mm (2)
  • 105.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (73)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Screw-On Connection (4)
  • Straight-Cylindrical (69)
Number of Flutes
Number of Flutes
  • 2 (73)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (151)
  • 2.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (1)
  • 0.119 in (7)
  • 0.125 in (5)
  • 0.156 in (9)
  • 0.157 in (12)
  • 0.188 in (13)
  • 0.197 in (15)
  • 0.237 in (20)
  • 0.25 in (19)
  • 0.312 in (12)
  • 0.313 in (12)
  • 0.315 in (17)
  • 0.375 in (17)
  • 0.394 in (19)
  • 0.492 in (17)
  • 0.5 in (15)
  • 0.625 in (7)
  • 0.63 in (10)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (1)
  • 3.0 mm (7)
  • 3.176 mm (5)
  • 3.95 mm (8)
  • 3.975 mm (8)
  • 4.0 mm (12)
  • 4.775 mm (13)
  • 5.0 mm (15)
  • 6.0 mm (20)
  • 6.351 mm (19)
  • 7.926 mm (12)
  • 7.95 mm (12)
  • 8.0 mm (17)
  • 9.525 mm (17)
  • 10.0 mm (19)
  • 12.5 mm (17)
  • 12.701 mm (15)
  • 15.875 mm (7)
  • 16.0 mm (10)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC505M (70)
  • KC515M (75)
  • KC530M (66)
  • KCPH15 (55)
  • KCPK10 (108)
  • KCPK25 (59)
  • KCU15 (77)
  • KNS10 (85)
Hand Of Tool
Hand Of Tool
  • R (73)
Rough Finish
Rough Finish
  • F (47)
Wiper Insert
Wiper Insert
  • N (77)
Maximum Ramp Angle
Maximum Ramp Angle
  • 3.0 (73)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Cutting Width
Cutting Width
  • 0.237 in (3)
  • 0.25 in (2)
  • 0.312 in (1)
  • 0.313 in (1)
  • 0.315 in (5)
  • 0.375 in (4)
  • 0.394 in (6)
  • 0.473 in (7)
  • 0.5 in (6)
  • 0.625 in (4)
  • 0.63 in (7)
  • 0.75 in (5)
  • 0.787 in (7)
  • 0.984 in (7)
  • 1.0 in (5)
  • 1.25 in (2)
  • 1.26 in (5)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 6.0 mm (3)
  • 6.351 mm (2)
  • 7.926 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (5)
  • 9.525 mm (4)
  • 10.0 mm (6)
  • 12.0 mm (7)
  • 12.701 mm (6)
  • 15.875 mm (4)
  • 16.0 mm (7)
  • 19.05 mm (5)
  • 20.0 mm (7)
  • 25.0 mm (7)
  • 25.401 mm (5)
  • 31.75 mm (2)
  • 32.0 mm (5)
Cutting Width Min to Cutting Width Max
Neck Diameter
Neck Diameter
  • 0.211 in (2)
  • 0.213 in (1)
  • 0.228 in (3)
  • 0.276 in (3)
  • 0.295 in (1)
  • 0.335 in (1)
  • 0.347 in (2)
  • 0.351 in (2)
  • 0.354 in (1)
  • 0.414 in (7)
  • 0.42 in (2)
  • 0.551 in (7)
  • 0.709 in (8)
  • 0.71 in (2)
  • 0.882 in (6)
  • 0.89 in (2)
  • 1.127 in (5)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.351 mm (2)
  • 5.4 mm (1)
  • 5.801 mm (3)
  • 7.0 mm (3)
  • 7.5 mm (1)
  • 8.5 mm (1)
  • 8.8 mm (2)
  • 8.9 mm (2)
  • 9.0 mm (1)
  • 10.5 mm (7)
  • 10.675 mm (2)
  • 14.0 mm (7)
  • 18.0 mm (8)
  • 18.026 mm (2)
  • 22.401 mm (6)
  • 22.6 mm (2)
  • 28.6 mm (5)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • DMB-BALL NOSE (78)
Cutting Tool Material
Cutting Tool Material
  • H W (78)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (69)
  • SCREW-ON (4)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (3)
  • 6.351 mm (2)
  • 8.0 mm (3)
  • 9.525 mm (4)
  • 10.0 mm (4)
  • 12.0 mm (8)
  • 12.701 mm (7)
  • 13.0 mm (2)
  • 15.875 mm (3)
  • 16.0 mm (7)
  • 18.0 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (7)
  • 21.0 mm (1)
  • 25.0 mm (4)
  • 25.401 mm (5)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (3)
  • 0.25 in (2)
  • 0.315 in (3)
  • 0.375 in (4)
  • 0.394 in (4)
  • 0.473 in (8)
  • 0.5 in (7)
  • 0.512 in (2)
  • 0.625 in (3)
  • 0.63 in (7)
  • 0.709 in (1)
  • 0.75 in (5)
  • 0.787 in (7)
  • 0.828 in (1)
  • 0.984 in (4)
  • 1.0 in (5)
  • 1.25 in (3)
  • 1.26 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Ramping: BlankRamping: Blank
  • Slotting: Ball NoseSlotting: Ball Nose
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • 3D Profiling3D Profiling
  • PocketingPocketing
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D3] Neck Diameter [D3] Neck Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Coolant Supply Maximum Ramping Angle Max RPM Gage Insert Weight Pounds
2877812 KDMB0375R354A038SN KDMB0375R354A038SN 9.5250 .3750 12.7 .5 8.5100 .3350 90.0000 3.543 35.0000 1.378 4.7630 .1875 1 2 N 3.000 40000 KDMB0375.. 0.07
    List price:
    $346,96 /each.
    Your price::
    Qty
    2878434 KDMB0500R512A050SN KDMB0500R512A050SN 12.7000 .5000 12.7 .5 10.4900 .4130 130.0000 5.120 32.0000 1.260 6.3500 .2500 1 2 N 3.000 40000 KDMB0500.. 0.22
      List price:
      $346,96 /each.
      Your price::
      Qty
      2878433 KDMB0500R591A050SN KDMB0500R591A050SN 12.7000 .5000 12.7 .5 10.4900 .4130 150.0000 5.906 46.0000 1.810 6.3500 .2500 1 2 N 3.000 40000 KDMB0500.. 0.22
        List price:
        $346,96 /each.
        Your price::
        Qty
        2878435 KDMB0625R551A063SN KDMB0625R551A063SN 15.8750 .6250 15.875 .625 14.0000 .5510 140.0000 5.512 36.0000 1.420 7.9380 .3125 1 2 N 3.000 40000 KDMB0625.. 0.44
          List price:
          $354,70 /each.
          Your price::
          Qty
          2878436 KDMB0625R630A063SN KDMB0625R630A063SN 15.8750 .6250 15.875 .625 14.0000 .5510 160.0000 6.299 53.0000 2.090 7.9380 .3125 1 2 N 3.000 40000 KDMB0625.. 0.44
            List price:
            $354,70 /each.
            Your price::
            Qty
            2878437 KDMB0750R630A075SN KDMB0750R630A075SN 19.0500 .7500 19.05 .75 18.0100 .7090 159.5250 6.280 44.5250 1.753 9.5250 .3750 1 2 N 3.000 40000 KDMB0750.. 0.88
              List price:
              $371,64 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              • Ramping: BlankRamping: Blank
              • Slotting: Ball NoseSlotting: Ball Nose
              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
              • 3D Profiling3D Profiling
              • PocketingPocketing
              • Shank - Cylindrical  PlainShank - Cylindrical Plain
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D3] Neck Diameter [D3] Neck Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Coolant Supply Maximum Ramping Angle Max RPM Gage Insert Weight Pounds
              2879403 KDMB0375R472A038HNC KDMB0375R472A038HNC 9.5250 .3750 9.525 .375 8.8900 .3500 120.0000 4.730 33.2630 1.309 9.5250 .3750 1 2 Y 3.000 30000 KDMB0375.. 0.23
                List price:
                $731,72 /each.
                Your price::
                Qty
                2879404 KDMB0375R591A038HNC KDMB0375R591A038HNC 9.5250 .3750 9.525 .375 8.8900 .3500 150.0000 5.910 48.2630 1.900 4.7630 .1875 1 2 Y 3.000 30000 KDMB0375.. 0.28
                  List price:
                  $803,91 /each.
                  Your price::
                  Qty
                  2879405 KDMB0500R472A050HNC KDMB0500R472A050HNC 12.7000 .5000 12.7 .5 10.6700 .4200 120.0000 4.730 35.3500 1.391 4.7630 .1875 1 2 Y 3.000 40000 KDMB0500.. 0.39
                    List price:
                    $793,89 /each.
                    Your price::
                    Qty
                    2879406 KDMB0500R630A050HNC KDMB0500R630A050HNC 12.7000 .5000 12.7 .5 10.6700 .4200 160.0000 6.300 50.3500 1.982 7.9380 .3125 1 2 Y 3.000 40000 KDMB0500.. 0.53
                      List price:
                      $906,13 /each.
                      Your price::
                      Qty
                      2879409 KDMB0750R551A075HNC KDMB0750R551A075HNC 19.0500 .7500 19.05 .75 18.0300 .7100 140.0000 5.520 49.5250 1.949 6.3500 .2500 1 2 Y 3.000 40000 KDMB0750.. 1.04
                        List price:
                        $1.219,01 /each.
                        Your price::
                        Qty
                        2879410 KDMB0750R827A075HNC KDMB0750R827A075HNC 19.0500 .7500 19.05 .75 18.0300 .7100 210.0000 8.270 60.0000 2.362 12.7000 .5000 1 2 Y 3.000 40000 KDMB0750.. 0.96
                          List price:
                          $1.486,11 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          KDMB™

                          Indexable Ball Nose Finisher
                          (5 Products)
                          • Ramping: BlankRamping: Blank
                          • Slotting: Ball NoseSlotting: Ball Nose
                          • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                          • 3D Profiling3D Profiling
                          • PocketingPocketing
                          • Shank - Cylindrical  PlainShank - Cylindrical Plain
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts [Z] Number of Flutes Maximum Ramping Angle Max RPM Gage Insert Weight Pounds
                          2878444 KDMB0312R551A031ST KDMB0312R551A031ST 7.9250 .3120 12.7 .5 140.0000 5.512 50.0000 1.969 3.9690 .1563 1 2 3.000 40000 KDMB0312.. 0.25
                            List price:
                            $346,96 /each.
                            Your price::
                            Qty
                            2878445 KDMB0375R591A038ST KDMB0375R591A038ST 9.5250 .3750 12.7 .5 150.0000 5.910 35.0000 1.380 4.7630 .1875 1 2 3.000 40000 KDMB0375.. 0.29