Cutters Mill 1-18™ • Inch

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (50)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (50)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (50)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (50)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (50)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (50)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (50)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (50)
  • M Stainless Steel (50)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (50)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (50)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (50)
  • K Cast Iron (50)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (50)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (50)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (50)
  • N Non-Ferrous Materials (50)
    • N1
      Wrought Aluminum (50)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (50)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (50)
  • S High-Temp Alloys (50)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (50)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (50)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (50)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (50)
  • H Hardened Materials (50)
    • H1
      Hardened Materials 44-48 HRC (50)
Applications
Applications
  • Face Milling Face Milling (51)
  • Pocket Pocket (47)
  • Pocket Helical Pocket Helical (47)
  • Pocket Milling Pocket Milling (47)
  • Ramping Ramping (47)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (4)
  • Shoulder Milling Shoulder Milling (51)
  • Shoulder Roughing Shoulder Roughing (7)
  • Shoulder Square End Shoulder Square End (47)
  • Slot Milling Slot Milling (38)
  • Slot Square End Slot Square End (38)
Cutting Diameter
Cutting Diameter
  • 0.969 in (1)
  • 1.0 in (9)
  • 1.252 in (9)
  • 1.5 in (8)
  • 1.504 in (1)
  • 2.0 in (8)
  • 2.5 in (3)
  • 3.0 in (6)
  • 4.0 in (2)
  • 5.0 in (1)
  • 6.0 in (2)
  • 8.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 24.6 mm (1)
  • 25.401 mm (9)
  • 31.8 mm (9)
  • 38.1 mm (8)
  • 38.2 mm (1)
  • 50.801 mm (8)
  • 63.5 mm (3)
  • 76.2 mm (6)
  • 101.601 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (2)
  • 203.201 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 15.976 mm (2)
  • 16.2 mm (2)
  • 16.401 mm (6)
  • 17.401 mm (6)
  • 17.5 mm (4)
  • 17.6 mm (3)
  • 17.7 mm (5)
  • 17.901 mm (4)
  • 18.0 mm (19)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.629 in (2)
  • 0.638 in (2)
  • 0.646 in (6)
  • 0.685 in (6)
  • 0.69 in (4)
  • 0.694 in (3)
  • 0.698 in (5)
  • 0.705 in (4)
  • 0.709 in (19)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.575 in (10)
  • 1.625 in (1)
  • 1.688 in (1)
  • 1.75 in (4)
  • 1.752 in (5)
  • 2.0 in (7)
  • 2.188 in (1)
  • 2.189 in (1)
  • 2.25 in (4)
  • 2.253 in (1)
  • 2.5 in (1)
  • 2.625 in (1)
  • 3.0 in (2)
  • 3.688 in (1)
  • 3.75 in (3)
  • 4.187 in (1)
  • 4.188 in (1)
  • 4.25 in (3)
  • 4.252 in (3)
Reach Min to Reach Max
Reach
Reach
  • 40.0 mm (10)
  • 41.276 mm (1)
  • 42.875 mm (1)
  • 44.45 mm (4)
  • 44.5 mm (5)
  • 50.801 mm (7)
  • 55.575 mm (1)
  • 55.6 mm (1)
  • 57.151 mm (4)
  • 57.2 mm (1)
  • 63.5 mm (1)
  • 66.675 mm (1)
  • 76.2 mm (2)
  • 93.676 mm (1)
  • 95.25 mm (3)
  • 106.351 mm (1)
  • 106.375 mm (1)
  • 107.95 mm (3)
  • 108.0 mm (3)
Reach Min to Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (21)
  • C-Bolt Circle (1)
  • CV-Caterpillar V-Flange In (6)
  • Straight-Cylindrical (6)
  • Weldon (17)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 2 (12)
  • 3 (16)
  • 4 (7)
  • 5 (6)
  • 6 (2)
  • 7 (3)
  • 8 (3)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (50)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (10)
  • 1.75 in (1)
  • 1.752 in (5)
  • 2.0 in (5)
  • 2.5 in (1)
  • 3.781 in (1)
  • 3.969 in (1)
  • 4.03 in (2)
  • 4.469 in (2)
  • 4.53 in (4)
  • 4.532 in (1)
  • 5.187 in (1)
  • 5.562 in (2)
  • 5.969 in (1)
  • 6.03 in (1)
  • 6.468 in (1)
  • 6.469 in (1)
  • 6.53 in (1)
  • 6.531 in (1)
  • 7.187 in (1)
  • 7.562 in (2)
  • 8.0 in (3)
  • 10.0 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (10)
  • 44.45 mm (1)
  • 44.5 mm (5)
  • 50.801 mm (5)
  • 63.5 mm (1)
  • 96.0 mm (1)
  • 100.801 mm (1)
  • 102.351 mm (2)
  • 113.5 mm (2)
  • 115.051 mm (4)
  • 115.101 mm (1)
  • 131.75 mm (1)
  • 141.275 mm (2)
  • 151.6 mm (1)
  • 153.15 mm (1)
  • 164.25 mm (1)
  • 164.3 mm (1)
  • 165.851 mm (1)
  • 165.9 mm (1)
  • 182.55 mm (1)
  • 192.076 mm (2)
  • 203.201 mm (3)
  • 254.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (49)
  • 0.031 in (49)
  • 0.047 in (49)
  • 0.063 in (49)
  • 0.079 in (49)
  • 0.094 in (49)
  • 0.095 in (49)
  • 0.125 in (50)
  • 0.157 in (50)
  • 0.187 in (50)
  • 0.189 in (50)
  • 0.197 in (50)
  • 0.25 in (50)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (49)
  • 0.8 mm (49)
  • 1.201 mm (49)
  • 1.6 mm (49)
  • 2.0 mm (49)
  • 2.375 mm (49)
  • 2.401 mm (49)
  • 3.176 mm (50)
  • 4.0 mm (50)
  • 4.75 mm (50)
  • 4.801 mm (50)
  • 5.0 mm (50)
  • 6.351 mm (50)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (50)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (50)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (50)
  • KC422M (50)
  • KC520M (50)
  • KC522M (50)
  • KC525M (50)
  • KC715M (50)
  • KC725M (50)
  • KC935M (49)
  • KCK15 (49)
  • KCK20B (50)
  • KCPK30 (50)
  • KCPM20 (50)
  • KCPM40 (50)
  • KCSM30 (50)
  • KCSM40 (50)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.0 (1)
  • 1.3 (2)
  • 1.6 (1)
  • 2.1 (2)
  • 3.0 (4)
  • 3.8 (3)
  • 5.2 (7)
  • 5.5 (1)
  • 7.5 (2)
  • 8.2 (7)
  • 10.9 (7)
  • 13.4 (2)
  • 14.0 (1)
  • 16.7 (6)
  • 17.7 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Insert Shape
Insert Shape
  • E-PARALLELOGRAM 70 (50)
  • X-PARALLELOGRAM 70 (50)
Neck Diameter
Neck Diameter
  • 0.852 in (1)
  • 0.882 in (9)
  • 1.133 in (9)
  • 1.383 in (9)
  • 1.843 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.651 mm (1)
  • 22.401 mm (9)
  • 28.75 mm (9)
  • 35.1 mm (9)
  • 46.801 mm (1)
Neck Diameter Min to Neck Diameter Max
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (23)
  • SHELL MILL (22)
  • TAPER SHANK (6)
System Size
System Size
  • CV40 (6)
Back-End Diameter
Back-End Diameter
  • 19.0 mm (1)
  • 19.05 mm (10)
  • 25.401 mm (14)
  • 31.701 mm (14)
  • 38.1 mm (4)
  • 44.45 mm (6)
  • 50.801 mm (1)
  • 63.526 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.748 in (1)
  • 0.75 in (10)
  • 1.0 in (14)
  • 1.248 in (14)
  • 1.5 in (4)
  • 1.75 in (6)
  • 2.0 in (1)
  • 2.501 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?