Cutters KSSM™ 12 • Metric

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (38)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (38)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (38)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (38)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (38)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (38)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (38)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (38)
  • M Stainless Steel (38)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (38)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (38)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (38)
  • K Cast Iron (38)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (38)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (38)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (38)
  • N Non-Ferrous Materials (38)
    • N1
      Wrought Aluminum (38)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (38)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (38)
  • S High-Temp Alloys (38)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (38)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (38)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (38)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (38)
  • H Hardened Materials (38)
    • H1
      Hardened Materials 44-48 HRC (38)
Applications
Applications
  • Face Milling Face Milling (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (15)
  • Shoulder Milling Shoulder Milling (17)
  • Shoulder Square End Shoulder Square End (17)
  • Slot Milling Slot Milling (21)
  • Slot Side Slot Side (21)
Cutting Diameter
Cutting Diameter
  • 4.921 in (10)
  • 6.299 in (10)
  • 7.875 in (7)
  • 9.843 in (6)
  • 12.403 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 125.0 mm (10)
  • 160.0 mm (10)
  • 200.0 mm (7)
  • 250.0 mm (6)
  • 315.0 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.701 mm (17)
  • 18.0 mm (9)
  • 19.826 mm (1)
  • 19.85 mm (2)
  • 20.651 mm (9)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.461 in (17)
  • 0.709 in (9)
  • 0.781 in (3)
  • 0.814 in (9)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.969 in (4)
  • 2.011 in (11)
Reach Min to Reach Max
Reach
Reach
  • 50.0 mm (4)
  • 51.051 mm (11)
Reach Min to Reach Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (14)
  • 2 Key & Socket Head Cap Screw (9)
  • B-Cutter Retention Screw (11)
  • C-Bolt Circle (4)
Number of Flutes
Number of Flutes
  • 10 (3)
  • 11 (1)
  • 12 (2)
  • 14 (3)
  • 16 (2)
  • 18 (1)
  • 4 (4)
  • 5 (4)
  • 7 (4)
  • 8 (9)
  • 9 (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (38)
  • 4.0 (38)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.742 in (3)
  • 0.787 in (3)
  • 0.951 in (4)
  • 1.969 in (4)
  • 2.011 in (11)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 18.85 mm (3)
  • 20.0 mm (3)
  • 24.125 mm (4)
  • 50.0 mm (4)
  • 51.051 mm (11)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (38)
  • 0.031 in (38)
  • 0.047 in (38)
  • 0.063 in (38)
  • 0.078 in (38)
  • 0.094 in (38)
  • 0.095 in (38)
  • 0.125 in (38)
  • 0.126 in (38)
  • 0.187 in (38)
  • 0.249 in (38)
  • 0.25 in (38)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (38)
  • 0.8 mm (38)
  • 1.201 mm (38)
  • 1.6 mm (38)
  • 1.975 mm (38)
  • 2.375 mm (38)
  • 2.401 mm (38)
  • 3.176 mm (38)
  • 3.2 mm (38)
  • 4.75 mm (38)
  • 6.325 mm (38)
  • 6.351 mm (38)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (38)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (38)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (38)
  • KC510M (38)
  • KC520M (38)
  • KC522M (38)
  • KC525M (28)
  • KC715M (28)
  • KC725M (38)
  • KC735M (38)
  • KC792M (28)
  • KC915M (38)
  • KC920M (38)
  • KC925M (28)
  • KC935M (28)
  • KCK15 (38)
  • KCK20B (38)
  • KCPK30 (38)
  • KCPM20 (38)
  • KCPM40 (38)
  • KCSM30 (38)
  • KCSM40 (38)
  • KTPK20 (28)
  • KUC20M (28)
  • KUC30M (28)
  • KY1335 (28)
  • KY3500 (38)
  • X500 (38)
Hand Of Tool
Hand Of Tool
  • L (10)
  • N (21)
  • R (7)
Front-End
Clamp Style
Clamp Style
  • S (4)
Cutting Width
Cutting Width
  • 0.709 in (9)
  • 0.781 in (3)
  • 0.814 in (9)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 18.0 mm (9)
  • 19.826 mm (3)
  • 20.651 mm (9)
Cutting Width Min to Cutting Width Max
Cartridge Size
Cartridge Size
  • 18N - KSSM Slotting (2)
  • 20W - KSSM Slotting (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.256 in (6)
  • 1.339 in (4)
  • 1.709 in (3)
  • 2.028 in (4)
  • 2.055 in (1)
  • 2.069 in (2)
  • 2.102 in (2)
  • 2.299 in (2)
  • 2.539 in (2)
  • 2.567 in (1)
  • 2.581 in (2)
  • 3.524 in (1)
  • 3.559 in (1)
  • 3.565 in (2)
  • 3.579 in (2)
  • 4.508 in (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 31.901 mm (6)
  • 34.0 mm (4)
  • 43.401 mm (3)
  • 51.5 mm (4)
  • 52.2 mm (1)
  • 52.551 mm (2)
  • 53.401 mm (2)
  • 58.401 mm (2)
  • 64.5 mm (2)
  • 65.2 mm (1)
  • 65.55 mm (2)
  • 89.5 mm (1)
  • 90.4 mm (1)
  • 90.551 mm (2)
  • 90.9 mm (2)
  • 114.5 mm (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Center Cutting
Center Cutting
Back-End
Connection Type
Connection Type
  • ARBOR (23)
  • SHELL MILL (15)
Back-End Diameter
Back-End Diameter
  • 32.0 mm (6)
  • 40.0 mm (16)
  • 50.0 mm (9)
  • 60.0 mm (7)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.26 in (6)
  • 1.575 in (16)
  • 1.969 in (9)
  • 2.362 in (7)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?