Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

HARVI™ III High-Performance Solid Carbide End Mills

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (197)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (43)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (43)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (43)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (43)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (197)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (197)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (43)
  • M Stainless Steel (197)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (197)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (197)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (197)
  • S High-Temp Alloys (197)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (197)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (197)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (197)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (197)
  • H Hardened Materials (197)
    • H1
      Hardened Materials 44-48 HRC
      (197)
Select First Choice
  • DE (10)
  • GB (4)
  • IN (1)
  • US (49)
Applications
Applications
  • Face Milling Face Milling (148)
  • Pocket Pocket (319)
  • Pocket Helical Pocket Helical (309)
  • Pocket Milling Pocket Milling (319)
  • Pocket Plunge Milling Pocket Plunge Milling (19)
  • Profile Milling Profile Milling (83)
  • Ramping Ramping (310)
  • Shoulder Ball Nose Shoulder Ball Nose (83)
  • Shoulder Milling Shoulder Milling (365)
  • Shoulder Roughing Shoulder Roughing (173)
  • Shoulder Square End Shoulder Square End (209)
  • Slot Ball Nose Slot Ball Nose (24)
  • Slot Milling Slot Milling (24)
  • Trochoidal Milling Trochoidal Milling (151)
Cutting Diameter
Cutting Diameter
  • 0.125 in (2)
  • 0.157 in (2)
  • 0.188 in (2)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.25 in (2)
  • 0.276 in (2)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.375 in (10)
  • 0.394 in (11)
  • 0.438 in (2)
  • 0.473 in (15)
  • 0.5 in (19)
  • 0.551 in (3)
  • 0.625 in (15)
  • 0.63 in (17)
  • 0.75 in (25)
  • 0.787 in (17)
  • 0.984 in (14)
  • 1.0 in (26)
  • 1.25 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.176 mm (2)
  • 4.0 mm (2)
  • 4.775 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (2)
  • 7.0 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 9.525 mm (10)
  • 10.0 mm (11)
  • 11.125 mm (2)
  • 12.0 mm (15)
  • 12.701 mm (19)
  • 14.0 mm (3)
  • 15.875 mm (15)
  • 16.0 mm (17)
  • 19.05 mm (25)
  • 20.0 mm (17)
  • 25.0 mm (14)
  • 25.401 mm (26)
  • 31.75 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.45 mm (1)
  • 7.625 mm (1)
  • 8.625 mm (1)
  • 9.025 mm (1)
  • 9.25 mm (1)
  • 9.625 mm (1)
  • 11.101 mm (1)
  • 11.451 mm (1)
  • 11.625 mm (2)
  • 12.101 mm (1)
  • 13.451 mm (1)
  • 14.625 mm (1)
  • 14.8 mm (1)
  • 14.826 mm (1)
  • 14.925 mm (1)
  • 14.951 mm (1)
  • 15.0 mm (1)
  • 15.101 mm (1)
  • 15.175 mm (1)
  • 15.25 mm (1)
  • 15.275 mm (1)
  • 15.351 mm (1)
  • 15.451 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.293 in (1)
  • 0.3 in (1)
  • 0.34 in (1)
  • 0.355 in (1)
  • 0.364 in (1)
  • 0.379 in (1)
  • 0.437 in (1)
  • 0.451 in (1)
  • 0.458 in (2)
  • 0.477 in (1)
  • 0.53 in (1)
  • 0.577 in (1)
  • 0.583 in (1)
  • 0.584 in (1)
  • 0.588 in (1)
  • 0.589 in (1)
  • 0.591 in (1)
  • 0.595 in (1)
  • 0.597 in (1)
  • 0.6 in (1)
  • 0.601 in (1)
  • 0.604 in (1)
  • 0.608 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 10.0 mm (2)
  • 12.0 mm (2)
  • 12.701 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 22.0 mm (7)
  • 22.225 mm (3)
  • 25.0 mm (2)
  • 25.401 mm (12)
  • 26.0 mm (17)
  • 29.0 mm (1)
  • 30.175 mm (3)
  • 31.75 mm (24)
  • 32.0 mm (15)
  • 33.0 mm (3)
  • 38.0 mm (16)
  • 38.1 mm (19)
  • 39.0 mm (3)
  • 39.7 mm (2)
  • 41.276 mm (14)
  • 42.0 mm (1)
  • 44.45 mm (10)
  • 45.0 mm (14)
  • 50.801 mm (12)
  • 57.151 mm (6)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.394 in (2)
  • 0.473 in (2)
  • 0.5 in (1)
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.866 in (7)
  • 0.875 in (3)
  • 0.984 in (2)
  • 1.0 in (12)
  • 1.024 in (17)
  • 1.143 in (1)
  • 1.188 in (3)
  • 1.25 in (24)
  • 1.26 in (15)
  • 1.299 in (3)
  • 1.496 in (16)
  • 1.5 in (19)
  • 1.536 in (3)
  • 1.563 in (2)
  • 1.625 in (14)
  • 1.655 in (1)
  • 1.75 in (10)
  • 1.772 in (14)
  • 2.0 in (12)
  • 2.25 in (6)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.75 in (1)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.024 in (1)
  • 1.143 in (1)
  • 1.181 in (4)
  • 1.188 in (3)
  • 1.193 in (3)
  • 1.209 in (2)
  • 1.25 in (3)
  • 1.299 in (3)
  • 1.407 in (4)
  • 1.417 in (8)
  • 1.431 in (4)
  • 1.457 in (5)
  • 1.496 in (1)
  • 1.5 in (1)
  • 1.536 in (3)
  • 1.563 in (2)
  • 1.655 in (1)
  • 1.875 in (1)
  • 1.889 in (4)
  • 1.891 in (9)
  • 1.909 in (5)
  • 2.0 in (2)
  • 2.25 in (7)
  • 2.277 in (4)
  • 2.362 in (9)
  • 2.386 in (6)
  • 2.434 in (2)
  • 2.953 in (12)
  • 3.25 in (3)
Reach Min to Reach Max
Reach
Reach
  • 19.05 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (4)
  • 30.175 mm (3)
  • 30.3 mm (3)
  • 30.701 mm (2)
  • 31.75 mm (3)
  • 33.0 mm (3)
  • 35.7 mm (4)
  • 36.0 mm (8)
  • 36.35 mm (4)
  • 37.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (3)
  • 39.7 mm (2)
  • 42.0 mm (1)
  • 47.625 mm (1)
  • 47.975 mm (4)
  • 48.0 mm (9)
  • 48.475 mm (5)
  • 50.801 mm (2)
  • 57.151 mm (7)
  • 57.801 mm (4)
  • 60.0 mm (9)
  • 60.6 mm (6)
  • 61.825 mm (2)
  • 75.0 mm (12)
  • 82.551 mm (3)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 84.0 (12)
  • 86.0 (12)
  • 90.0 (173)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • SAFE-LOCK (90)
  • Straight-Cylindrical (276)
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (83)
  • RADIUS (235)
  • SQUARE END (48)
Corner Radius
Corner Radius
  • 0.0 in (25)
  • 0.015 in (5)
  • 0.02 in (11)
  • 0.03 in (36)
  • 0.039 in (9)
  • 0.06 in (15)
  • 0.063 in (2)
  • 0.079 in (10)
  • 0.09 in (6)
  • 0.094 in (2)
  • 0.098 in (2)
  • 0.119 in (11)
  • 0.12 in (15)
  • 0.125 in (2)
  • 0.138 in (2)
  • 0.156 in (2)
  • 0.157 in (8)
  • 0.16 in (1)
  • 0.188 in (4)
  • 0.19 in (2)
  • 0.197 in (4)
  • 0.219 in (2)
  • 0.237 in (5)
  • 0.25 in (6)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.5 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (25)
  • 0.375 mm (5)
  • 0.5 mm (11)
  • 0.75 mm (36)
  • 1.0 mm (9)
  • 1.526 mm (15)
  • 1.6 mm (2)
  • 2.0 mm (10)
  • 2.275 mm (6)
  • 2.375 mm (2)
  • 2.5 mm (2)
  • 3.0 mm (11)
  • 3.051 mm (15)
  • 3.176 mm (2)
  • 3.5 mm (2)
  • 3.975 mm (2)
  • 4.0 mm (8)
  • 4.075 mm (1)
  • 4.775 mm (4)
  • 4.825 mm (2)
  • 5.0 mm (4)
  • 5.551 mm (2)
  • 6.0 mm (5)
  • 6.351 mm (6)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.701 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (197)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (197)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCSM15 (197)
Maximum Ramp Angle
Maximum Ramp Angle
  • 3.0 (129)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Neck Diameter
Neck Diameter
  • 0.352 in (5)
  • 0.353 in (1)
  • 0.37 in (13)
  • 0.444 in (21)
  • 0.472 in (6)
  • 0.588 in (6)
  • 0.593 in (27)
  • 0.705 in (4)
  • 0.74 in (28)
  • 0.925 in (15)
  • 0.941 in (3)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 8.951 mm (5)
  • 8.975 mm (1)
  • 9.4 mm (13)
  • 11.275 mm (21)
  • 11.951 mm (6)
  • 14.925 mm (6)
  • 15.05 mm (27)
  • 17.901 mm (4)
  • 18.8 mm (28)
  • 23.5 mm (15)
  • 23.875 mm (3)
Neck Diameter Min to Neck Diameter Max
Back-End
Back-End Diameter
Back-End Diameter
  • 7.95 mm (1)
  • 8.0 mm (1)
  • 9.525 mm (10)
  • 10.0 mm (11)
  • 12.0 mm (18)
  • 12.701 mm (21)
  • 14.0 mm (4)
  • 15.875 mm (22)
  • 16.0 mm (22)
  • 19.05 mm (25)
  • 20.0 mm (17)
  • 25.0 mm (14)
  • 25.401 mm (26)
  • 31.75 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.313 in (1)
  • 0.315 in (1)
  • 0.375 in (10)
  • 0.394 in (11)
  • 0.473 in (18)
  • 0.5 in (21)
  • 0.551 in (4)
  • 0.625 in (22)
  • 0.63 in (22)
  • 0.75 in (25)
  • 0.787 in (17)
  • 0.984 in (14)
  • 1.0 in (26)
  • 1.25 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

HARVI™ III • Radiused • 6 Flutes • Plain Shank • Inch HARVI™ III • Radiused • 6 Flutes • Plain Shank • Inch

HARVI™ III Solid Carbide End Mill for High Feed Roughing and Finishing with Maximum Metal Removal Rates
(86 Products)
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Corner Style: Corner RadiusCorner Style: Corner Radius
  • Corner Style: Square EndCorner Style: Square End
  • Helix Angle: 38°Helix Angle: 38°
  • Tool Dimensions: Flute Configuration: 6Tool Dimensions: Flute Configuration: 6
  • Trochoidal MillingTrochoidal Milling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
5351930 UJDE1000J6BRC UJDE1000J6BRC KCSM15   Straight-Cylindrical 1.5240 .0600 6 25.4000 1.000 25.4 1.0 44.4500 1.750 114.3000 4.500
    List price:
    $892.29 /each
    Your price:
    5351931 UJDE1000J6BRE UJDE1000J6BRE KCSM15   Straight-Cylindrical 3.0480 .1200 6 25.4000 1.000 25.4 1.0 44.4500 1.750 114.3000 4.500
      List price:
      $892.29 /each
      Your price:
      5351811 UJDE375J6CRA UJDE375J6CRA KCSM15   Straight-Cylindrical 0.3810 .0150 6 9.5250 .3750 9.525 .375 25.4000 1.000 76.2000 3.000
        List price:
        $139.51 /each
        Your price:
        5351814 UJDE375J6CRC UJDE375J6CRC KCSM15   Straight-Cylindrical 1.5240 .0600 6 9.5250 .3750 9.525 .375 25.4000 1.000 76.2000 3.000
          List price:
          $139.51 /each
          Your price:
          5351818 UJDE500J6BRB UJDE500J6BRB KCSM15   Straight-Cylindrical 0.7620 .0300 6 12.7000 .5000 12.7 .5 31.7500 1.250 76.2000 3.000
            List price:
            $224.25 /each
            Your price:
            5351899 UJDE750J6CRB UJDE750J6CRB KCSM15   Straight-Cylindrical 0.7620 .0300 6 19.0500 .7500 19.05 .75 41.2750 1.625 101.6000 4.000
              List price:
              $626.82 /each
              Your price:
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              HARVI™ III • Radiused • 6 Flutes • Safe-Lock™ Shank • Inch HARVI™ III • Radiused • 6 Flutes • Safe-Lock™ Shank • Inch

              HARVI™ III Solid Carbide End Mill for High Feed Roughing and Finishing with Maximum Metal Removal Rates
              (35 Products)
              • Corner Style: Corner RadiusCorner Style: Corner Radius
              • Helix Angle: 38°Helix Angle: 38°
              • Ramping: BlankRamping: Blank
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Trochoidal MillingTrochoidal Milling
              • Corner Style: Square EndCorner Style: Square End
              • Tool Dimensions: Flute Configuration: 6Tool Dimensions: Flute Configuration: 6
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              5351934 UJDE1000N6BRB UJDE1000N6BRB KCSM15   SAFE-LOCK 0.7620 .0300 6 25.4000 1.000 25.4 1.0 44.4500 1.750 114.3000 4.500
                List price:
                $927.53 /each
                Your price:
                5351942 UJDE1250N6BRB UJDE1250N6BRB KCSM15   SAFE-LOCK 0.7620 .0300 6 31.7500 1.250 31.75 1.25 57.1500 2.250 127.0000 5.000
                  List price:
                  $1,262.20 /each
                  Your price:
                  5351824 UJDE500N6BRB UJDE500N6BRB KCSM15   SAFE-LOCK 0.7620 .0300 6 12.7000 .5000 12.7 .5 31.7500 1.250 76.2000 3.000
                    List price:
                    $249.78 /each
                    Your price:
                    5351894 UJDE750N6BRC UJDE750N6BRC KCSM15   SAFE-LOCK 1.5240 .0600 6 19.0500 .7500 19.05 .75 38.1000 1.500 101.6000 4.000
                      List price:
                      $658.19 /each
                      Your price:
                      5351895 UJDE750N6BRD UJDE750N6BRD KCSM15   SAFE-LOCK 2.2860 .0900 6 19.0500 .7500 19.05 .75 38.1000 1.500 101.6000 4.000
                        List price:
                        $620.93 /each
                        Your price:
                        5351907 UJDE750N6CRE UJDE750N6CRE KCSM15   SAFE-LOCK 3.0480 .1200 6 19.0500 .7500 19.05 .75 41.2750 1.625 101.6000 4.000
                          List price:
                          $658.19 /each
                          Your price:
                          List price:
                          Discount: %
                          Your price:
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance

                          ORIGINAL PRODUCT

                          HARVI™ III • Square End • 6 Flutes • Plain Shank • Inch HARVI™ III • Square End • 6 Flutes • Plain Shank • Inch

                          HARVI™ III Solid Carbide End Mill for High Feed Roughing and Finishing with Maximum Metal Removal Rates
                          (18 Products)
                          • Tool Dimensions: Flute Configuration: 6Tool Dimensions: Flute Configuration: 6
                          • Corner Style: Square EndCorner Style: Square End
                          • Helix Angle: 38°Helix Angle: 38°
                          • Trochoidal MillingTrochoidal Milling
                          • Ramping: BlankRamping: Blank
                          • Corner Style: Corner RadiusCorner Style: Corner Radius
                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
                          5351933 UJDE1000J6BS UJDE1000J6BS KCSM15   Straight-Cylindrical 6 25.4000 1.000 25.4 1.0 44.4500 1.750 114.3000 4.500
                            List price:
                            $810.49 /each
                            Your price:
                            5415973 UJDE1000J6CS UJDE1000J6CS KCSM15   Straight-Cylindrical 6 25.4000 1.000