Drills
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- N7MMC's (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
- H2Hardened Materials 48-55 HRC(3)
- H3Hardened Materials 56-60 HRC(3)
- H4Hardened Materials >60 HRC(3)
Applications
Applications
Convex Drilling (3)
Drilling (3)
Inclined Entry Drilling (3)
Inclined Exit Drilling (3)
X-Offset Drilling (3)
Cutting Diameter
Cutting Diameter
- 1.063 in(1)
- 1.143 in(1)
- 1.22 in(1)
to
Cutting Diameter
Cutting Diameter
- 27.0 mm(1)
- 29.0 mm(1)
- 31.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 81.0 mm(1)
- 87.0 mm(1)
- 93.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 3.189 in(1)
- 3.426 in(1)
- 3.661 in(1)
to
Reach
Reach
- 3.781 in(1)
- 4.055 in(1)
- 4.331 in(1)
to
Reach
Reach
- 96.0 mm(1)
- 103.0 mm(1)
- 110.0 mm(1)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
- 3.0 (3)
to
Over All Length [L]
Over All Length [L]
- 5.944 in(1)
- 6.219 in(1)
- 6.494 in(1)
to
Over All Length [L]
Over All Length [L]
- 150.951 mm(1)
- 157.951 mm(1)
- 164.951 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (3)
- KC7140 (3)
- KC720 (3)
- KC7215 (3)
- KC7225 (3)
- KC7815 (3)
- KC7820 (3)
- KC7935 (3)
- KC810 (3)
- KC990 (3)
- KCMS35 (3)
- KCPK10 (3)
- KCU25 (3)
- KCU40 (3)
- KD1425 (3)
- KMF (3)
- KU40D (3)
No filters matching ""
