successfully added to cart
View Cart

Notifications

Mark all as read

KM80TS™

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (73)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (73)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (73)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (73)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (73)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (73)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (73)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (73)
  • M Stainless Steel (73)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (73)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (73)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (73)
  • K Cast Iron (75)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (75)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (75)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (75)
  • N Non-Ferrous Materials (62)
    • N1
      Wrought Aluminum
      (62)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (62)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (29)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (57)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (56)
    • N6
      Carbon, Graphite Composites, CFRP
      (55)
    • N7
      MMC's
      (54)
  • S High-Temp Alloys (75)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (75)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (75)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (75)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (73)
  • H Hardened Materials (54)
    • H1
      Hardened Materials 44-48 HRC
      (54)
    • H2
      Hardened Materials 48-55 HRC
      (47)
    • H3
      Hardened Materials 56-60 HRC
      (47)
    • H4
      Hardened Materials >60 HRC
      (45)
Applications
Applications
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (48)
  • Grooving Grooving (9)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (52)
  • OD Thread Turning OD Thread Turning (9)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (36)
  • TRN Boring TRN Boring (47)
  • Threading Threading (9)
  • Turning Turning (67)
Type of Thread
Type of Thread
  • 60 (5)
  • ACME (7)
  • API (5)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (5)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (5)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (70)
  • Interrupted (43)
  • Lightly Interrupted Cut (70)
  • Smooth Cut (70)
  • Varying Depth of Cut (70)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (5)
  • 62.5 (1)
  • 75.0 (15)
  • 90.0 (15)
  • 93.0 (14)
  • 95.0 (20)
  • 107.5 (5)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (40)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (41)
  • 2.0 (51)
  • 3.0 (2)
  • 4.0 (58)
  • 6.0 (2)
  • 8.0 (41)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.003 in (5)
  • 0.004 in (29)
  • 0.005 in (3)
  • 0.006 in (5)
  • 0.007 in (5)
  • 0.008 in (20)
  • 0.01 in (5)
  • 0.011 in (3)
  • 0.012 in (3)
  • 0.014 in (18)
  • 0.016 in (38)
  • 0.017 in (3)
  • 0.019 in (5)
  • 0.02 in (3)
  • 0.023 in (7)
  • 0.024 in (2)
  • 0.031 in (51)
  • 0.033 in (4)
  • 0.035 in (5)
  • 0.039 in (3)
  • 0.047 in (51)
  • 0.049 in (3)
  • 0.06 in (3)
  • 0.062 in (7)
  • 0.063 in (62)
  • 0.069 in (3)
  • 0.078 in (3)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.094 in (22)
  • 0.095 in (37)
  • 0.098 in (2)
  • 0.125 in (2)
  • 0.126 in (19)
  • 0.157 in (7)
  • 0.197 in (6)
  • 0.237 in (6)
  • 0.394 in (1)
  • 0.492 in (3)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (3)
  • 0.076 mm (5)
  • 0.1 mm (29)
  • 0.125 mm (3)
  • 0.151 mm (5)
  • 0.176 mm (5)
  • 0.2 mm (20)
  • 0.225 mm (3)
  • 0.25 mm (5)
  • 0.275 mm (3)
  • 0.301 mm (3)
  • 0.325 mm (7)
  • 0.351 mm (16)
  • 0.4 mm (38)
  • 0.426 mm (3)
  • 0.45 mm (5)
  • 0.476 mm (2)
  • 0.5 mm (3)
  • 0.576 mm (7)
  • 0.601 mm (2)
  • 0.775 mm (3)
  • 0.8 mm (48)
  • 0.826 mm (4)
  • 0.9 mm (5)
  • 1.0 mm (3)
  • 1.201 mm (51)
  • 1.25 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (7)
  • 1.6 mm (62)
  • 1.75 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.375 mm (22)
  • 2.401 mm (37)
  • 2.5 mm (2)
  • 3.176 mm (2)
  • 3.2 mm (19)
  • 4.0 mm (7)
  • 5.0 mm (6)
  • 6.0 mm (6)
  • 10.0 mm (1)
  • 12.5 mm (3)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (37)
  • CM2 (36)
  • CPX (42)
  • K090 (46)
  • K10M (46)
  • K10P (39)
  • K20K (46)
  • K25P (41)
  • K313 (52)
  • K420 (51)
  • K68 (54)
  • KC210 (36)
  • KC5010 (65)
  • KC5025 (55)
  • KC5410 (51)
  • KC5510 (46)
  • KC730 (43)
  • KC7310 (46)
  • KC8050 (59)
  • KC810 (56)
  • KC850 (68)
  • KC9010 (49)
  • KC9025 (58)
  • KC910 (49)
  • KC9105 (39)
  • KC9110 (66)
  • KC9120 (60)
  • KC9125 (61)
  • KC9140 (58)
  • KC9145 (57)
  • KC9215 (46)
  • KC9225 (46)
  • KC9240 (61)
  • KC9240NEW (56)
  • KC9245 (46)
  • KC9315 (47)
  • KC9320 (51)
  • KC9325 (46)
  • KC935 (56)
  • KC950 (57)
  • KC990 (52)
  • KCK05 (46)
  • KCK05B (46)
  • KCK15 (46)
  • KCK15B (47)
  • KCK20 (52)
  • KCK20B (57)
  • KCM15 (46)
  • KCM15B (39)
  • KCM25 (54)
  • KCM25B (53)
  • KCM35 (46)
  • KCM35B (37)
  • KCP10 (61)
  • KCP10B (59)
  • KCP25 (61)
  • KCP25B (67)
  • KCP30 (59)
  • KCP30B (55)
  • KCP40 (55)
  • KCP40B (55)
  • KCPK05 (47)
  • KCS10B (46)
  • KCU10 (65)
  • KCU25 (55)
  • KU30T (51)
  • KY1320 (41)
  • KY1615 (40)
  • KY3000 (51)
  • KY3500 (48)
  • KY4400 (41)
  • KYHK15B (41)
  • KYK35 (48)
  • NL250 (46)
  • NL300 (48)
  • SP0819 (43)
  • SP3019 (43)
  • TN10P (35)
  • TN15M (38)
  • TN20K (38)
  • TN20P (38)
  • TN30M (38)
  • TN30P (40)
  • TN5015 (35)
  • TN7010 (36)
  • TN7015 (47)
  • TN7025 (47)
  • TN7115 (47)
  • TN7125 (42)
  • TN8025 (46)
  • WK05CT (38)
  • WK20CT (38)
  • WM15CT (38)
  • WM25CT (45)
  • WM35CT (38)
  • WP15CT (50)
  • WP25CT (50)
  • WP35CT (50)
  • WS10PT (38)
  • WS25PT (38)
Hand Of Tool
Hand Of Tool
  • L (15)
  • N (7)
  • R (18)
Wiper Insert
Wiper Insert
  • N (75)
  • Y (36)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (1)
  • 41.301 mm (1)
  • 47.6 mm (1)
  • 88.9 mm (1)
  • 100.0 mm (7)
  • 106.0 mm (39)
  • 139.701 mm (1)
  • 150.0 mm (1)
  • 174.601 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (1)
  • 1.627 in (1)
  • 1.874 in (1)
  • 3.5 in (1)
  • 3.938 in (7)
  • 4.173 in (39)
  • 5.5 in (1)
  • 5.906 in (1)
  • 6.875 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (5)
  • S (27)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (30)
  • NEGATIVE-ZERO (3)
  • NEUTRAL (ZERO) (5)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (47)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (47)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (10)
Front-End
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (5)
  • CARTRIDGE MOUNT (26)
  • COMBI SHELL ADAPTER (1)
  • DRILL SHANK 2 FLATS (3)
  • END MILL ADAPTER (13)
  • ER COLLET CHUCK (3)
  • EXTENSION (2)
  • REDUCER (5)
  • SCREW-ON ADAPTER (3)
  • SHELL MILL ADAPTER (14)
  • SQUARE SHANK ADAPTER (15)
  • WHISTLE NOTCH ADAPTER (2)
Clamp Style
Clamp Style
  • D (8)
  • M (42)
  • N (9)
  • P (16)
Cutting Width
Cutting Width
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.069 in (3)
  • 0.073 in (3)
  • 0.078 in (3)
  • 0.079 in (3)
  • 0.088 in (3)
  • 0.089 in (3)
  • 0.095 in (3)
  • 0.097 in (3)
  • 0.098 in (3)
  • 0.105 in (3)
  • 0.108 in (3)
  • 0.11 in (3)
  • 0.119 in (5)
  • 0.122 in (3)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.128 in (3)
  • 0.131 in (2)
  • 0.138 in (5)
  • 0.143 in (3)
  • 0.156 in (3)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (3)
  • 0.177 in (5)
  • 0.178 in (3)
  • 0.181 in (2)
  • 0.185 in (4)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (3)
  • 0.197 in (4)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (2)
  • 0.219 in (2)
  • 0.237 in (4)
  • 0.25 in (6)
  • 0.255 in (2)
  • 0.276 in (2)
  • 0.281 in (4)
  • 0.312 in (4)
  • 0.315 in (1)
  • 0.345 in (2)
  • 0.354 in (2)
  • 0.375 in (4)
  • 0.38 in (2)
  • 0.383 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.75 mm (3)
  • 1.826 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (3)
  • 2.2 mm (3)
  • 2.225 mm (3)
  • 2.25 mm (3)
  • 2.401 mm (3)
  • 2.475 mm (3)
  • 2.5 mm (3)
  • 2.676 mm (3)
  • 2.75 mm (3)
  • 2.801 mm (3)
  • 3.0 mm (5)
  • 3.1 mm (3)
  • 3.176 mm (5)
  • 3.2 mm (5)
  • 3.25 mm (3)
  • 3.325 mm (2)
  • 3.5 mm (5)
  • 3.6 mm (3)
  • 3.95 mm (3)
  • 3.975 mm (2)
  • 4.0 mm (5)
  • 4.25 mm (5)
  • 4.3 mm (3)
  • 4.5 mm (5)
  • 4.525 mm (3)
  • 4.601 mm (2)
  • 4.7 mm (4)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (3)
  • 5.0 mm (4)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.525 mm (2)
  • 5.575 mm (2)
  • 6.0 mm (4)
  • 6.351 mm (6)
  • 6.476 mm (2)
  • 7.0 mm (2)
  • 7.125 mm (4)
  • 7.926 mm (4)
  • 8.0 mm (1)
  • 8.75 mm (2)
  • 9.0 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.726 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • FDA - Milling Cutter Arbor (11)
  • KMT - KM Adapter (7)
  • MCS - Modular Cartridge System (26)
  • SPK-Holding Arbor-Spindle Head (4)
  • SZK - Collet Taper (3)
  • VKT - Square Shank (15)
  • ZYL - Cylindrical Adapter (26)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (24)
  • D-DIAMOND/RHOMBIC 55 (19)
  • R-ROUND (6)
  • S-SQUARE 90 (12)
  • TN-TOP NOTCH (9)
  • V-DIAMOND/RHOMBIC 35 (3)
  • W-TRIGON 80 (2)
Front End Style
Front End Style
  • FDA03 Longit &Transver Drive (1)
  • FDA12 Transv Drive&CutRetScr (1)
  • FDA22 Transv Drive & SHCS (7)
  • FDA42TranDrvw/CtrScrwORBoltCir (2)
  • KMT00 All KM, except 02,05,09 (7)
  • MCS01 Modular Deep Grooving (26)
  • SPK02 Bolt Circ Dia 101.6 mm (4)
  • SZK02 Collets 8 Degree Taper (3)
  • VKT01 Std Design (15)
  • ZYL03 Attachment Thread (3)
  • ZYL10 Weldon Shank (13)
  • ZYL13 2Deg-Whistle Notch (2)
  • ZYL22 Boring Bar Shank (5)
  • ZYL56 2Plain Clamp Surf w/Pcs (3)
Insert Size
Insert Size
  • 3 (3)
  • 4 (2)
  • 5 (2)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (2)
  • 0.294 in (2)
  • 0.299 in (2)
  • 0.416 in (2)
  • 1.581 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (2)
  • 7.476 mm (2)
  • 7.601 mm (2)
  • 10.55 mm (2)
  • 40.151 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.102 in (2)
  • 1.181 in (4)
  • 1.48 in (2)
  • 1.496 in (2)
  • 1.575 in (3)
  • 1.772 in (2)
  • 1.846 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.901 in (1)
  • 1.937 in (2)
  • 1.969 in (2)
  • 2.165 in (1)
  • 2.244 in (4)
  • 2.25 in (1)
  • 2.283 in (4)
  • 2.362 in (3)
  • 2.5 in (2)
  • 2.559 in (1)
  • 2.618 in (2)
  • 2.757 in (6)
  • 2.953 in (1)
  • 3.15 in (2)
  • 3.5 in (1)
  • 3.543 in (8)
  • 3.819 in (1)
  • 3.938 in (5)
  • 4.134 in (5)
  • 4.5 in (2)
  • 4.724 in (1)
  • 4.921 in (1)
  • 5.118 in (1)
  • 5.394 in (1)
  • 5.5 in (1)
  • 5.513 in (1)
  • 6.299 in (1)
  • 7.362 in (1)
  • 9.331 in (1)
Gage Length
Gage Length
  • 90 mm (8)
  • 47 mm (6)
  • 48 mm (6)
  • 70 mm (6)
  • 100 mm (5)
  • 105 mm (5)
  • 30 mm (4)
  • 57 mm (4)
  • 58 mm (4)
  • 40 mm (3)
  • 60 mm (3)
  • 28 mm (2)
  • 38 mm (2)
  • 45 mm (2)
  • 50 mm (2)
  • 80 mm (2)
  • 120 mm (1)
  • 125 mm (1)
  • 130 mm (1)
  • 137 mm (1)
  • 140 mm (1)
  • 160 mm (1)
  • 187 mm (1)
  • 237 mm (1)
  • 55 mm (1)
  • 65 mm (1)
  • 75 mm (1)
  • 97 mm (1)
  • 37.6 mm (2)
  • 46.901 mm (2)
  • 48.25 mm (1)
  • 49.2 mm (2)
  • 57.151 mm (1)
  • 63.5 mm (2)
  • 66.5 mm (2)
  • 88.9 mm (1)
  • 114.301 mm (2)
  • 139.701 mm (1)
Front End Size
Front End Size
  • 0.019 in (1)
  • 0.02 in (1)
  • 0.025 in (2)
  • 0.03 in (2)
  • 0.031 in (1)
  • 0.038 in (2)
  • 0.039 in (4)
  • 0.042 in (1)
  • 0.049 in (9)
  • 0.06 in (4)
  • 0.062 in (5)
  • 0.078 in (2)
  • 0.079 in (3)
  • 0.093 in (1)
  • 0.097 in (3)
  • 0.098 in (2)
  • 0.124 in (2)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (4)
  • 27.0 mm (1)
  • 31.75 mm (4)
  • 32.0 mm (5)
  • 38.1 mm (4)
  • 40.0 mm (5)
  • 50.0 mm (2)
  • 50.801 mm (3)
  • 60.0 mm (1)
  • 63.0 mm (3)
  • 63.5 mm (2)
  • 80.0 mm (2)
Front End Size Min to Front End Size Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (29)
  • B L (29)
  • C A (49)
  • C N (53)
  • D P (30)
  • H T (32)
  • H W (75)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (40)
System Size
System Size
  • KM40TS (2)
  • KM50TS (4)
  • KM63TS (4)
  • KM63XMZ (4)
  • KM80ATC (4)
  • KM80TS (114)
Back-End Diameter
Back-End Diameter
  • 80.0 mm (75)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.15 in (75)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM80TS™ Shank Tools

Blanks
(5 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number