Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

KM4X100™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (50)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (50)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (50)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (50)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (50)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (50)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (50)
  • M Stainless Steel (50)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (50)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (50)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (50)
  • K Cast Iron (50)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (50)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (50)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (50)
  • N Non-Ferrous Materials (43)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (39)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (41)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (34)
    • N7
      MMC's
      (35)
  • S High-Temp Alloys (50)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (50)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (50)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (50)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (50)
  • H Hardened Materials (33)
    • H1
      Hardened Materials 44-48 HRC
      (33)
    • H2
      Hardened Materials 48-55 HRC
      (29)
    • H3
      Hardened Materials 56-60 HRC
      (29)
    • H4
      Hardened Materials >60 HRC
      (24)
Applications
Applications
  • Chamfer Turning Chamfer Turning (13)
  • Deep Grooving Deep Grooving (8)
  • Facing Facing (43)
  • Grooving Grooving (8)
  • ID Facing ID Facing (25)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (30)
  • TRN Boring TRN Boring (33)
  • Turning Turning (44)
Type of Thread
Type of Thread
  • 60 (4)
  • ACME (6)
  • API (4)
  • API RD (4)
  • BSW (2)
  • BUTTRESS (4)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (4)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (22)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (11)
  • 90.0 (17)
  • 93.0 (10)
  • 95.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (38)
  • 3.0 (2)
  • 4.0 (31)
  • 6.0 (2)
  • 8.0 (27)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.003 in (4)
  • 0.004 in (10)
  • 0.005 in (2)
  • 0.006 in (4)
  • 0.007 in (4)
  • 0.008 in (8)
  • 0.01 in (4)
  • 0.011 in (2)
  • 0.012 in (2)
  • 0.014 in (10)
  • 0.016 in (16)
  • 0.017 in (2)
  • 0.019 in (4)
  • 0.02 in (2)
  • 0.023 in (6)
  • 0.031 in (28)
  • 0.033 in (4)
  • 0.035 in (4)
  • 0.039 in (2)
  • 0.047 in (28)
  • 0.049 in (2)
  • 0.06 in (2)
  • 0.062 in (4)
  • 0.063 in (35)
  • 0.069 in (2)
  • 0.078 in (2)
  • 0.079 in (4)
  • 0.089 in (4)
  • 0.094 in (11)
  • 0.095 in (29)
  • 0.098 in (2)
  • 0.125 in (2)
  • 0.126 in (13)
  • 0.157 in (4)
  • 0.197 in (3)
  • 0.237 in (3)
  • 0.25 in (2)
  • 0.375 in (2)
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.5 in (2)
  • 0.63 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.076 mm (4)
  • 0.1 mm (10)
  • 0.125 mm (2)
  • 0.151 mm (4)
  • 0.176 mm (4)
  • 0.2 mm (8)
  • 0.225 mm (2)
  • 0.25 mm (4)
  • 0.275 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (6)
  • 0.351 mm (8)
  • 0.4 mm (16)
  • 0.426 mm (2)
  • 0.45 mm (4)
  • 0.476 mm (1)
  • 0.5 mm (2)
  • 0.576 mm (6)
  • 0.775 mm (2)
  • 0.8 mm (26)
  • 0.826 mm (4)
  • 0.9 mm (4)
  • 1.0 mm (2)
  • 1.201 mm (28)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (4)
  • 1.6 mm (35)
  • 1.75 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.375 mm (11)
  • 2.401 mm (29)
  • 2.5 mm (2)
  • 3.176 mm (2)
  • 3.2 mm (13)
  • 4.0 mm (4)
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 6.351 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (2)
  • 16.0 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CPX (23)
  • K090 (30)
  • K10M (24)
  • K10P (22)
  • K20K (26)
  • K25P (22)
  • K313 (33)
  • K420 (35)
  • K68 (41)
  • KC250 (22)
  • KC5010 (44)
  • KC5025 (34)
  • KC5410 (30)
  • KC5510 (26)
  • KC730 (29)
  • KC7310 (24)
  • KC8050 (40)
  • KC810 (37)
  • KC850 (48)
  • KC9010 (25)
  • KC9025 (37)
  • KC910 (32)
  • KC9110 (45)
  • KC9120 (39)
  • KC9125 (41)
  • KC9140 (39)
  • KC9145 (37)
  • KC9215 (24)
  • KC9225 (26)
  • KC9240 (35)
  • KC9240NEW (31)
  • KC9245 (26)
  • KC9315 (33)
  • KC9320 (30)
  • KC9325 (32)
  • KC935 (38)
  • KC950 (37)
  • KC990 (33)
  • KCK05 (26)
  • KCK05B (24)
  • KCK15 (28)
  • KCK15B (29)
  • KCK20 (33)
  • KCK20B (37)
  • KCM15 (26)
  • KCM15B (22)
  • KCM25 (30)
  • KCM25B (29)
  • KCM35 (26)
  • KCM35B (22)
  • KCP10 (41)
  • KCP10B (36)
  • KCP25 (41)
  • KCP25B (43)
  • KCP30 (40)
  • KCP30B (31)
  • KCP40 (35)
  • KCP40B (35)
  • KCPK05 (25)
  • KCS10B (26)
  • KCU10 (44)
  • KCU25 (34)
  • KU30T (32)
  • KY1615 (25)
  • KY3000 (30)
  • KY3500 (24)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK35 (24)
  • NL250 (26)
  • NL300 (32)
  • SP0819 (22)
  • SP3019 (22)
  • TN10P (27)
  • TN15M (24)
  • TN20K (28)
  • TN20P (30)
  • TN30M (24)
  • TN30P (28)
  • TN5015 (22)
  • TN5020 (22)
  • TN5120 (22)
  • TN7015 (31)
  • TN7025 (31)
  • TN7035 (24)
  • TN7115 (29)
  • TN7125 (31)
  • TN7135 (24)
  • TN8025 (29)
  • WK05CT (26)
  • WK20CT (30)
  • WM15CT (26)
  • WM25CT (29)
  • WM35CT (26)
  • WP15CT (37)
  • WP25CT (37)
  • WP35CT (37)
  • WS10PT (24)
  • WS25PT (26)
  • WU10HT (23)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (5)
  • R (7)
Wiper Insert
Wiper Insert
  • N (50)
  • Y (18)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 120.0 mm (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.724 in (33)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
  • S (16)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (14)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (33)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Adapter Front-End
Adapter Front-End
  • BOEING TAPER FLANGE (1)
  • CARTRIDGE MOUNT (4)
  • END MILL ADAPTER (22)
  • ER COLLET CHUCK (7)
  • FM ADAPTER (1)
  • HTS MODULAR ADAPTER (2)
  • HYDRAULIC CHUCK (27)
  • HYDRAULIC CHUCK-HIGH TORQUE (5)
  • HYDRAULIC CHUCK-SLIM LINE (8)
  • KM MODULAR ADAPTER (15)
  • SHELL MILL ADAPTER (76)
  • SHRINK FIT ADAPTER (38)
  • SQUARE SHANK ADAPTER (9)
  • TUNABLE SHELL MILL ADAPTER (6)
  • WHISTLE NOTCH ADAPTER (15)
Clamp Style
Clamp Style
  • D (8)
  • M (29)
  • N (8)
  • P (4)
  • X (3)
Cutting Width
Cutting Width
  • 0.039 in (2)
  • 0.047 in (2)
  • 0.06 in (2)
  • 0.062 in (2)
  • 0.069 in (2)
  • 0.073 in (2)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.088 in (2)
  • 0.089 in (2)
  • 0.095 in (2)
  • 0.097 in (2)
  • 0.098 in (2)
  • 0.105 in (2)
  • 0.108 in (2)
  • 0.11 in (2)
  • 0.119 in (4)
  • 0.122 in (2)
  • 0.125 in (4)
  • 0.126 in (4)
  • 0.128 in (2)
  • 0.131 in (1)
  • 0.138 in (4)
  • 0.143 in (2)
  • 0.156 in (2)
  • 0.157 in (4)
  • 0.167 in (4)
  • 0.169 in (2)
  • 0.177 in (4)
  • 0.178 in (2)
  • 0.181 in (1)
  • 0.185 in (3)
  • 0.188 in (4)
  • 0.189 in (4)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
  • 0.197 in (4)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (2)
  • 0.219 in (2)
  • 0.237 in (4)
  • 0.25 in (6)
  • 0.255 in (2)
  • 0.276 in (2)
  • 0.281 in (4)
  • 0.312 in (4)
  • 0.315 in (1)
  • 0.345 in (2)
  • 0.354 in (2)
  • 0.375 in (4)
  • 0.38 in (2)
  • 0.383 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (2)
  • 1.201 mm (2)
  • 1.5 mm (2)
  • 1.576 mm (2)
  • 1.75 mm (2)
  • 1.826 mm (2)
  • 1.975 mm (2)
  • 2.0 mm (2)
  • 2.2 mm (2)
  • 2.225 mm (2)
  • 2.25 mm (2)
  • 2.401 mm (2)
  • 2.475 mm (2)
  • 2.5 mm (2)
  • 2.676 mm (2)
  • 2.75 mm (2)
  • 2.801 mm (2)
  • 3.0 mm (4)
  • 3.1 mm (2)
  • 3.176 mm (4)
  • 3.2 mm (4)
  • 3.25 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (4)
  • 3.6 mm (2)
  • 3.95 mm (2)
  • 3.975 mm (1)
  • 4.0 mm (4)
  • 4.25 mm (4)
  • 4.3 mm (2)
  • 4.5 mm (4)
  • 4.525 mm (2)
  • 4.601 mm (1)
  • 4.7 mm (3)
  • 4.775 mm (4)
  • 4.801 mm (4)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
  • 5.0 mm (4)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.525 mm (2)
  • 5.575 mm (2)
  • 6.0 mm (4)
  • 6.351 mm (6)
  • 6.476 mm (2)
  • 7.0 mm (2)
  • 7.125 mm (4)
  • 7.926 mm (4)
  • 8.0 mm (1)
  • 8.75 mm (2)
  • 9.0 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.726 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • BTF - BTF (1)
  • FDA - Milling Cutter Arbor (75)
  • FLK - Flange Adapter Kenna (1)
  • HTS - Deep Hole Index Drill (2)
  • KMT - KM Adapter (15)
  • MCS - Modular Cartridge System (4)
  • SPK-Holding Arbor-Spindle Head (7)
  • SZK - Collet Taper (7)
  • VKT - Square Shank (9)
  • ZYL - Cylindrical Adapter (115)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (18)
  • D-DIAMOND/RHOMBIC 55 (4)
  • R-ROUND (9)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (4)
  • TN-TOP NOTCH (8)
  • V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
  • BTF01 Standard BTF (1)
  • FDA12 Transv Drive&CutRetScr (3)
  • FDA22 Transv Drive & SHCS (69)
  • FDA42TranDrvw/CtrScrwORBoltCir (3)
  • FLK32FlngMt 3&6Bolt 67&97DBC (1)
  • HTS01 Standard HTS Shank (2)
  • KMT00 All KM, except 02,05,09 (13)
  • KMT09 KM4X 4 ball connection (2)
  • MCS01 Modular Deep Grooving (4)
  • SPK02 Bolt Circ Dia 101.6 mm (7)
  • SZK02 Collets 8 Degree Taper (7)
  • VKT01 Std Design (9)
  • ZYL01 Straight Shank (78)
  • ZYL10 Weldon Shank (22)
  • ZYL13 2Deg-Whistle Notch (10)
  • ZYL64 5° WN w/cyl end (5)
Insert Size
Insert Size
  • 3 (2)
  • 4 (2)
  • 5 (2)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.581 in (1)
  • 1.974 in (1)
  • 2.368 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 40.151 mm (1)
  • 50.151 mm (1)
  • 60.151 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 4 in (9)
  • 6 in (8)
  • 2 in (2)
  • 3 in (2)
  • 13 in (1)
  • 5 in (1)
  • 1.069 in (1)
  • 1.969 in (4)
  • 2.071 in (3)
  • 2.165 in (4)
  • 2.25 in (2)
  • 2.362 in (5)
  • 2.648 in (1)
  • 2.757 in (2)
  • 2.953 in (2)
  • 3.003 in (2)
  • 3.15 in (6)
  • 3.25 in (1)
  • 3.337 in (1)
  • 3.346 in (8)
  • 3.38 in (1)
  • 3.426 in (2)
  • 3.484 in (2)
  • 3.5 in (1)
  • 3.543 in (6)
  • 3.74 in (6)
  • 3.75 in (4)
  • 3.894 in (1)
  • 3.938 in (28)
  • 4.134 in (4)
  • 4.17 in (1)
  • 4.25 in (3)
  • 4.258 in (1)
  • 4.29 in (1)
  • 4.331 in (1)
  • 4.337 in (1)
  • 4.5 in (1)
  • 4.529 in (3)
  • 4.54 in (2)
  • 4.604 in (1)
  • 4.724 in (7)
  • 4.75 in (1)
  • 4.968 in (1)
  • 5.037 in (1)
  • 5.118 in (1)
  • 5.258 in (1)
  • 5.29 in (2)
  • 5.315 in (3)
  • 5.337 in (1)
  • 5.5 in (1)
  • 5.604 in (1)
  • 5.75 in (1)
  • 5.906 in (15)
  • 5.968 in (1)
  • 6.037 in (1)
  • 6.258 in (1)
  • 6.299 in (26)
  • 6.337 in (1)
  • 6.604 in (1)
  • 6.968 in (1)
  • 7.037 in (1)
  • 7.258 in (1)
  • 7.337 in (1)
  • 7.604 in (1)
  • 7.875 in (16)
  • 7.968 in (1)
  • 8.037 in (1)
  • 8.259 in (1)
  • 8.605 in (1)
  • 8.968 in (1)
  • 9.037 in (1)
  • 10.236 in (1)
  • 10.468 in (1)
  • 10.5 in (1)
  • 11.468 in (1)
  • 12.5 in (1)
  • 12.598 in (1)
  • 12.992 in (1)
Gage Length
Gage Length
  • 100 mm (28)
  • 160 mm (26)
  • 200 mm (16)
  • 150 mm (15)
  • 85 mm (8)
  • 120 mm (7)
  • 80 mm (6)
  • 90 mm (6)
  • 95 mm (6)
  • 60 mm (5)
  • 105 mm (4)
  • 50 mm (4)
  • 55 mm (4)
  • 115 mm (3)
  • 135 mm (3)
  • 70 mm (2)
  • 75 mm (2)
  • 87 mm (2)
  • 110 mm (1)
  • 127 mm (1)
  • 130 mm (1)
  • 260 mm (1)
  • 320 mm (1)
  • 330 mm (1)
  • 27.151 mm (1)
  • 50.801 mm (2)
  • 52.6 mm (3)
  • 57.151 mm (2)
  • 67.226 mm (1)
  • 76.2 mm (2)
  • 76.25 mm (2)
  • 82.551 mm (1)
  • 84.75 mm (1)
  • 85.851 mm (1)
  • 88.5 mm (2)
  • 88.9 mm (1)
  • 95.25 mm (4)
  • 98.9 mm (1)
  • 101.601 mm (9)
  • 105.9 mm (1)
  • 107.95 mm (3)
  • 108.15 mm (1)
  • 108.976 mm (1)
  • 110.15 mm (1)
  • 114.301 mm (1)
  • 115.325 mm (2)
  • 116.95 mm (1)
  • 120.65 mm (1)
  • 126.176 mm (1)
  • 127.95 mm (1)
  • 133.55 mm (1)
  • 134.375 mm (2)
  • 135.55 mm (1)
  • 139.701 mm (1)
  • 142.35 mm (1)
  • 146.05 mm (1)
  • 151.576 mm (1)
  • 152.4 mm (8)
  • 153.35 mm (1)
  • 158.951 mm (1)
  • 160.951 mm (1)
  • 167.75 mm (1)
  • 176.976 mm (1)
  • 178.75 mm (1)
  • 184.351 mm (1)
  • 186.351 mm (1)
  • 193.15 mm (1)
  • 202.375 mm (1)
  • 204.15 mm (1)
  • 209.75 mm (1)
  • 218.55 mm (1)
  • 227.775 mm (1)
  • 229.55 mm (1)
  • 265.875 mm (1)
  • 266.7 mm (1)
  • 291.276 mm (1)
  • 317.5 mm (1)
  • 330.201 mm (1)
Front End Size
Front End Size
  • 0.01 in (11)
  • 0.014 in (9)
  • 0.015 in (4)
  • 0.016 in (7)
  • 0.019 in (7)
  • 0.02 in (5)
  • 0.022 in (7)
  • 0.025 in (11)
  • 0.028 in (7)
  • 0.03 in (16)
  • 0.031 in (8)
  • 0.034 in (8)
  • 0.038 in (6)
  • 0.039 in (22)
  • 0.041 in (4)
  • 0.042 in (3)
  • 0.049 in (30)
  • 0.06 in (11)
  • 0.062 in (9)
  • 0.078 in (10)
  • 0.079 in (5)
  • 0.093 in (3)
  • 0.097 in (4)
  • 0.098 in (4)
  • 0.124 in (3)
  • 0.155 in (1)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 6.0 mm (7)
  • 6.351 mm (4)
  • 7.95 mm (2)
  • 8.0 mm (7)
  • 9.525 mm (4)
  • 10.0 mm (7)
  • 12.0 mm (7)
  • 12.701 mm (5)
  • 14.0 mm (7)
  • 15.875 mm (4)
  • 16.0 mm (7)
  • 18.0 mm (7)
  • 19.05 mm (16)
  • 20.0 mm (8)
  • 22.0 mm (7)