successfully added to cart
View Cart

Notifications

Mark all as read

PSC 50 Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (65)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (65)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (65)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (65)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (65)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (65)
  • M Stainless Steel (65)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (65)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (65)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (65)
  • K Cast Iron (65)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (65)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (65)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (65)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum
      (63)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (63)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (39)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (64)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (63)
    • N6
      Carbon, Graphite Composites, CFRP
      (57)
    • N7
      MMC's
      (58)
  • S High-Temp Alloys (65)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (65)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (65)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (65)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (65)
  • H Hardened Materials (58)
    • H1
      Hardened Materials 44-48 HRC
      (58)
    • H2
      Hardened Materials 48-55 HRC
      (55)
    • H3
      Hardened Materials 56-60 HRC
      (51)
    • H4
      Hardened Materials >60 HRC
      (49)
Applications
Applications
  • Facing Facing (53)
  • Grooving Grooving (8)
  • ID Facing ID Facing (47)
  • ID Grooving ID Grooving (5)
  • Multiple Direction Cutting Multiple Direction Cutting (53)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (14)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (47)
  • Turning Turning (53)
Type of Thread
Type of Thread
  • 55 (4)
  • 60 (12)
  • ACME (12)
  • API (10)
  • API BUTTRESS (2)
  • API RD (8)
  • BSPT (2)
  • BSW (10)
  • BUTTRESS (8)
  • M (10)
  • NPT (8)
  • NPTF (2)
  • RD DIN 405 (4)
  • STUB ACME (10)
  • TR DIN 103 (4)
  • UN (10)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (57)
  • Interrupted (34)
  • Lightly Interrupted Cut (57)
  • Smooth Cut (57)
  • Varying Depth of Cut (57)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (4)
  • 62.5 (1)
  • 72.5 (1)
  • 75.0 (7)
  • 90.0 (12)
  • 93.0 (19)
  • 95.0 (16)
  • 107.5 (5)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (45)
  • 2.0 (53)
  • 3.0 (6)
  • 4.0 (37)
  • 6.0 (4)
  • 8.0 (22)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (2)
  • 0.002 in (16)
  • 0.003 in (10)
  • 0.004 in (43)
  • 0.005 in (7)
  • 0.006 in (9)
  • 0.007 in (9)
  • 0.008 in (41)
  • 0.01 in (9)
  • 0.011 in (8)
  • 0.012 in (7)
  • 0.014 in (18)
  • 0.015 in (1)
  • 0.016 in (50)
  • 0.017 in (8)
  • 0.019 in (8)
  • 0.02 in (6)
  • 0.021 in (2)
  • 0.023 in (8)
  • 0.024 in (2)
  • 0.03 in (1)
  • 0.031 in (57)
  • 0.035 in (8)
  • 0.039 in (7)
  • 0.047 in (57)
  • 0.049 in (6)
  • 0.06 in (7)
  • 0.062 in (14)
  • 0.063 in (46)
  • 0.069 in (6)
  • 0.078 in (6)
  • 0.079 in (8)
  • 0.089 in (8)
  • 0.094 in (4)
  • 0.095 in (19)
  • 0.098 in (2)
  • 0.125 in (2)
  • 0.126 in (2)
  • 0.25 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (2)
  • 0.05 mm (16)
  • 0.076 mm (10)
  • 0.1 mm (43)
  • 0.125 mm (7)
  • 0.151 mm (9)
  • 0.176 mm (9)
  • 0.2 mm (41)
  • 0.225 mm (7)
  • 0.25 mm (9)
  • 0.275 mm (8)
  • 0.301 mm (7)
  • 0.325 mm (9)
  • 0.351 mm (17)
  • 0.375 mm (1)
  • 0.4 mm (50)
  • 0.426 mm (8)
  • 0.45 mm (8)
  • 0.476 mm (3)
  • 0.5 mm (6)
  • 0.525 mm (2)
  • 0.576 mm (8)
  • 0.601 mm (2)
  • 0.75 mm (1)
  • 0.775 mm (6)
  • 0.8 mm (51)
  • 0.9 mm (8)
  • 1.0 mm (7)
  • 1.201 mm (57)
  • 1.25 mm (6)
  • 1.5 mm (6)
  • 1.526 mm (1)
  • 1.576 mm (14)
  • 1.6 mm (46)
  • 1.75 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (8)
  • 2.25 mm (8)
  • 2.375 mm (4)
  • 2.401 mm (19)
  • 2.5 mm (2)
  • 3.176 mm (2)
  • 3.2 mm (2)
  • 6.351 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HK1500 (36)
  • K10M (41)
  • K20K (41)
  • K25M (36)
  • K25P (37)
  • K313 (59)
  • K68 (56)
  • KBH20 (37)
  • KC5010 (64)
  • KC5025 (63)
  • KC5410 (53)
  • KC5510 (39)
  • KC720 (42)
  • KC730 (51)
  • KC7310 (43)
  • KC732 (37)
  • KC8050 (53)
  • KC810 (59)
  • KC850 (59)
  • KC9010 (43)
  • KC9025 (53)
  • KC910 (55)
  • KC9105 (51)
  • KC9110 (61)
  • KC9120 (53)
  • KC9125 (53)
  • KC9140 (41)
  • KC9145 (37)
  • KC9215 (39)
  • KC9225 (51)
  • KC9240 (47)
  • KC9240NEW (47)
  • KC9245 (39)
  • KC9315 (53)
  • KC9320 (57)
  • KC9325 (45)
  • KC935 (61)
  • KC950 (57)
  • KC990 (45)
  • KCK05 (53)
  • KCK05B (43)
  • KCK15 (49)
  • KCK15B (53)
  • KCK20 (57)
  • KCK20B (57)
  • KCM15 (47)
  • KCM15B (51)
  • KCM25 (51)
  • KCM25B (47)
  • KCM35 (45)
  • KCM35B (36)
  • KCP05 (44)
  • KCP10 (53)
  • KCP10B (61)
  • KCP25 (53)
  • KCP25B (61)
  • KCP30 (49)
  • KCP40B (40)
  • KCPK05 (37)
  • KCS10B (49)
  • KCU10 (61)
  • KCU25 (59)
  • KT175 (38)
  • KT315 (50)
  • KU10T (46)
  • KU30T (57)
  • KY3000 (41)
  • NL250 (37)
  • THM (38)
  • TN10P (51)
  • TN15M (43)
  • TN20K (47)
  • TN20P (49)
  • TN30M (45)
  • TN5015 (38)
  • TN5020 (38)
  • TN5120 (40)
  • TN6025 (37)
  • TN7010 (42)
  • TN7015 (42)
  • TN7025 (42)
  • TN7035 (38)
  • TN7110 (48)
  • TN7115 (40)
  • TN7125 (40)
  • TN7135 (38)
  • TN8025 (38)
  • WK05CT (45)
  • WK20CT (49)
  • WM15CT (47)
  • WM25CT (47)
  • WM35CT (39)
  • WP15CT (49)
  • WP25CT (49)
  • WP35CT (49)
  • WS10PT (41)
  • WS25PT (43)
  • WU10HT (50)
  • WU10PT (38)
  • WU25PT (39)
Hand Of Tool
Hand Of Tool
  • L (8)
  • N (2)
  • R (11)
Wiper Insert
Wiper Insert
  • N (65)
  • Y (36)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 64.0 mm (2)
  • 65.0 mm (6)
  • 65.5 mm (1)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 88.9 mm (2)
  • 110.0 mm (27)
  • 125.0 mm (7)
  • 139.701 mm (2)
  • 165.0 mm (1)
  • 174.601 mm (2)
  • 209.601 mm (1)
  • 222.3 mm (1)
  • 223.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.253 in (1)
  • 2.441 in (3)
  • 2.52 in (2)
  • 2.559 in (6)
  • 2.579 in (1)
  • 2.598 in (1)
  • 3.15 in (2)
  • 3.5 in (2)
  • 4.331 in (27)
  • 4.921 in (7)
  • 5.5 in (2)
  • 6.496 in (1)
  • 6.875 in (2)
  • 8.252 in (1)
  • 8.752 in (1)
  • 8.78 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (2)
  • E (7)
  • S (12)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (9)
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 1.969 in (1)
  • 2.047 in (8)
  • 2.362 in (34)
  • 2.441 in (2)
  • 2.559 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (1)
  • 52.0 mm (8)
  • 60.0 mm (34)
  • 62.0 mm (2)
  • 65.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (8)
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (8)
Clamp Style
Clamp Style
  • D (34)
  • N (12)
  • P (7)
  • S (12)
Cutting Width
Cutting Width
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.06 in (6)
  • 0.062 in (6)
  • 0.069 in (6)
  • 0.073 in (6)
  • 0.078 in (6)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (6)
  • 0.095 in (6)
  • 0.097 in (6)
  • 0.098 in (6)
  • 0.105 in (6)
  • 0.108 in (6)
  • 0.11 in (6)
  • 0.119 in (8)
  • 0.122 in (6)
  • 0.125 in (8)
  • 0.126 in (8)
  • 0.128 in (6)
  • 0.131 in (3)
  • 0.138 in (8)
  • 0.143 in (6)
  • 0.156 in (6)
  • 0.157 in (8)
  • 0.167 in (8)
  • 0.169 in (6)
  • 0.177 in (8)
  • 0.178 in (6)
  • 0.181 in (3)
  • 0.185 in (8)
  • 0.188 in (8)
  • 0.189 in (8)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (6)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (2)
  • 0.255 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.5 mm (6)
  • 1.576 mm (6)
  • 1.75 mm (6)
  • 1.826 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.225 mm (6)
  • 2.25 mm (6)
  • 2.401 mm (6)
  • 2.475 mm (6)
  • 2.5 mm (6)
  • 2.676 mm (6)
  • 2.75 mm (6)
  • 2.801 mm (6)
  • 3.0 mm (8)
  • 3.1 mm (6)
  • 3.176 mm (8)
  • 3.2 mm (8)
  • 3.25 mm (6)
  • 3.325 mm (3)
  • 3.5 mm (8)
  • 3.6 mm (6)
  • 3.95 mm (6)
  • 3.975 mm (3)
  • 4.0 mm (8)
  • 4.25 mm (8)
  • 4.3 mm (6)
  • 4.5 mm (8)
  • 4.525 mm (6)
  • 4.601 mm (3)
  • 4.7 mm (8)
  • 4.775 mm (8)
  • 4.801 mm (8)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (2)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.575 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (2)
  • 6.476 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (8)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (17)
  • D-DIAMOND/RHOMBIC 55 (15)
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
  • R-ROUND (2)
  • S-SQUARE 90 (4)
  • TN-TOP NOTCH (8)
  • V-DIAMOND/RHOMBIC 35 (11)
  • W-TRIGON 80 (4)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (8)
Insert Size
Insert Size
  • 3 (6)
  • 4 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (4)
  • 0.294 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (4)
  • 7.476 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.693 in (2)
  • 1.929 in (2)
  • 2.185 in (2)
  • 2.5 in (2)
Gage Length
Gage Length
  • 43 mm (2)
  • 49 mm (2)
  • 55.5 mm (2)
  • 63.5 mm (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (50)
  • B L (44)
  • C A (37)
  • C N (47)
  • D P (42)
  • H T (50)
  • H W (65)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (21)
System Size
System Size
  • PSC50 (18)
Back-End Diameter
Back-End Diameter
  • 50.0 mm (65)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.969 in (65)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC50

Cutting Units • P-Clamping
(1 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
6316679 PSC50PCRNL19 PSC50PCRNL19 60.0000 2.362 27.0000 1.063 CN..190612/CN..643 0.92
    List price:
    $359.70 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance
    Qty

    Sold in pkg. of

    ORIGINAL PRODUCT

    PSC50

    Cutting Units • D-Clamping
    (6 Products)
    • Shank - PSCShank - PSC
    • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
    • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
    6319656 PSC50DCLNL12 PSC50DCLNL12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CN..120408/CN..432 0.92
      List price:
      $359.70 /each.
      Your price::
      Qty
      6319657 PSC50DCLNL16 PSC50DCLNL16 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..160612/CN..543 0.94
        List price:
        $359.70 /each.
        Your price::
        Qty
        6319658 PSC50DCLNL19 PSC50DCLNL19 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..190612/CN..643 0.91
          List price:
          $359.70 /each.
          Your price::
          Qty
          6319659 PSC50DCLNR12 PSC50DCLNR12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CN..120408/CN..432 0.80
            List price:
            $359.70 /each.
            Your price::
            Qty
            6319660 PSC50DCLNR16 PSC50DCLNR16 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..160612/CN..543 0.94
              List price:
              $359.70 /each.
              Your price::
              Qty
              6319691 PSC50DCLNR19 PSC50DCLNR19 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..190612/CN..643 0.91
                List price:
                $359.70 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                PSC50

                Cutting Units • D-Clamping
                (2 Products)
                • Shank - PSCShank - PSC
                • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                6319692 PSC50DCRNL12 PSC50DCRNL12 60.0000 2.362 27.0000 1.063 CN..120408/CN..432 0.92
                  List price:
                  $359.70 /each.
                  Your price::
                  Qty
                  6319693 PSC50DCRNR12 PSC50DCRNR12 60.0000 2.362 27.0000 1.063 CN..120408/CN..432 0.81
                    List price:
                    $359.70 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    PSC50

                    Cutting Units • Threading and Grooving
                    (3 Products)
                    • Shank - PSCShank - PSC
                    • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                    • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                    • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                    6338255 PSC50NEL3 PSC50NEL3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3R 0.69
                      List price:
                      $435.63 /each.
                      Your price::
                      Qty
                      6338256 PSC50NEL4 PSC50NEL4 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG4R 0.69
                        List price:
                        $406.61 /each.
                        Your price::
                        Qty
                        6338254 PSC50NER3 PSC50NER3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3L 0.69
                          List price:
                          $466.37 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          PSC50

                          Cutting Units • Threading and Grooving
                          (2 Products)
                          • Shank - PSCShank - PSC
                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                          6338311 PSC50NRL3 PSC50NRL3 52.0000 2.047 35.0000 1.378 64.0000 2.519 NU3R 0.69