PSC 63

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (144)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (144)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (144)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (144)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (144)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (144)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (144)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (144)
  • M Stainless Steel (144)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (144)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (144)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (144)
  • K Cast Iron (144)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (144)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (144)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (144)
  • N Non-Ferrous Materials (141)
    • N1
      Wrought Aluminum (141)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (141)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (94)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (141)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (141)
    • N6
      Carbon, Graphite Composites, CFRP (141)
    • N7
      MMC's (137)
  • S High-Temp Alloys (144)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (144)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (144)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (144)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (144)
  • H Hardened Materials (120)
    • H1
      Hardened Materials 44-48 HRC (120)
    • H2
      Hardened Materials 48-55 HRC (120)
    • H3
      Hardened Materials 56-60 HRC (108)
    • H4
      Hardened Materials >60 HRC (100)
  • C CFRP Materials (105)
    • C1
      CFRP, CFRP / CFRP (105)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (101)
Applications
Applications
  • Back Boring Back Boring (1)
  • Facing Facing (102)
  • Grooving Grooving (9)
  • ID Facing ID Facing (86)
  • ID Grooving ID Grooving (9)
  • ID Thread Turning ID Thread Turning (19)
  • Multiple Direction Cutting Multiple Direction Cutting (118)
  • OD Thread Turning OD Thread Turning (3)
  • Plunge Turning Plunge Turning (15)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (86)
  • Turning Turning (109)
Type of Thread
Type of Thread
  • 55 (16)
  • 60 (37)
  • ACME (35)
  • API (23)
  • API BUTTRESS (4)
  • API RD (24)
  • BSPT (12)
  • BSW (28)
  • BUTTRESS (21)
  • M (29)
  • NPT (24)
  • NPTF (12)
  • RD DIN 405 (16)
  • STUB ACME (28)
  • TR DIN 103 (16)
  • UN (33)
  • UNJ (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (127)
  • Lightly Interrupted Cut (128)
  • Smooth Cut (128)
  • Varying Depth of Cut (127)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 49.683 (1)
  • 62.5 (2)
  • 72.5 (2)
  • 75.0 (10)
  • 90.0 (46)
  • 93.0 (33)
  • 95.0 (36)
  • 107.5 (10)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (96)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (95)
  • 2.0 (107)
  • 3.0 (20)
  • 4.0 (79)
  • 6.0 (4)
  • 8.0 (47)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.047 in (2)
  • 2.126 in (1)
  • 2.205 in (1)
  • 2.362 in (2)
  • 2.559 in (83)
  • 2.757 in (3)
  • 2.953 in (2)
  • 3.543 in (5)
  • 3.938 in (7)
  • 4.134 in (4)
  • 4.331 in (7)
  • 4.724 in (2)
  • 4.921 in (2)
  • 5.513 in (19)
  • 5.71 in (1)
  • 6.891 in (5)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 52.0 mm (2)
  • 54.0 mm (1)
  • 56.0 mm (1)
  • 60.0 mm (2)
  • 65.0 mm (83)
  • 70.0 mm (3)
  • 75.0 mm (2)
  • 90.0 mm (5)
  • 100.0 mm (7)
  • 105.0 mm (4)
  • 110.0 mm (7)
  • 120.0 mm (2)
  • 125.0 mm (2)
  • 140.0 mm (19)
  • 145.0 mm (1)
  • 175.0 mm (5)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (2)
  • 0.001 in (9)
  • 0.002 in (37)
  • 0.003 in (33)
  • 0.004 in (87)
  • 0.005 in (14)
  • 0.006 in (30)
  • 0.007 in (21)
  • 0.008 in (86)
  • 0.01 in (21)
  • 0.011 in (14)
  • 0.012 in (15)
  • 0.014 in (38)
  • 0.015 in (1)
  • 0.016 in (97)
  • 0.017 in (4)
  • 0.019 in (19)
  • 0.02 in (15)
  • 0.021 in (2)
  • 0.023 in (19)
  • 0.024 in (4)
  • 0.028 in (5)
  • 0.03 in (3)
  • 0.031 in (114)
  • 0.035 in (19)
  • 0.037 in (6)
  • 0.039 in (16)
  • 0.047 in (111)
  • 0.049 in (14)
  • 0.055 in (1)
  • 0.06 in (15)
  • 0.062 in (27)
  • 0.063 in (98)
  • 0.069 in (14)
  • 0.078 in (12)
  • 0.079 in (19)
  • 0.089 in (19)
  • 0.094 in (21)
  • 0.095 in (48)
  • 0.098 in (7)
  • 0.125 in (7)
  • 0.126 in (21)
  • 0.157 in (8)
  • 0.197 in (1)
  • 0.237 in (2)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.394 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (2)
  • 0.025 mm (9)
  • 0.05 mm (37)
  • 0.076 mm (33)
  • 0.1 mm (87)
  • 0.125 mm (14)
  • 0.151 mm (30)
  • 0.176 mm (21)
  • 0.2 mm (86)
  • 0.225 mm (13)
  • 0.25 mm (21)
  • 0.275 mm (14)
  • 0.301 mm (15)
  • 0.325 mm (20)
  • 0.351 mm (37)
  • 0.375 mm (1)
  • 0.4 mm (97)
  • 0.426 mm (4)
  • 0.45 mm (19)
  • 0.476 mm (6)
  • 0.5 mm (15)
  • 0.525 mm (2)
  • 0.576 mm (19)
  • 0.601 mm (4)
  • 0.701 mm (5)
  • 0.75 mm (3)
  • 0.775 mm (14)
  • 0.8 mm (100)
  • 0.9 mm (19)
  • 0.925 mm (6)
  • 1.0 mm (16)
  • 1.201 mm (111)
  • 1.25 mm (14)
  • 1.401 mm (1)
  • 1.5 mm (14)
  • 1.526 mm (1)
  • 1.576 mm (27)
  • 1.6 mm (98)
  • 1.75 mm (14)
  • 1.975 mm (12)
  • 2.0 mm (19)
  • 2.25 mm (19)
  • 2.375 mm (21)
  • 2.401 mm (48)
  • 2.5 mm (7)
  • 3.176 mm (7)
  • 3.2 mm (21)
  • 4.0 mm (8)
  • 5.0 mm (1)
  • 6.0 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (68)
  • 241 (15)
  • AC5 (4)
  • CG4 (2)
  • CL4 (50)
  • CM2 (66)
  • CM3 (54)
  • CM4 (29)
  • CM5 (6)
  • CPX (73)
  • CW2 (33)
  • CW2015 (64)
  • CW5025 (69)
  • GH1 (2)
  • GX (32)
  • HCK10 (6)
  • HCK20 (5)
  • HK1500 (55)
  • HK35 (6)
  • HT2 (52)
  • HTX (32)
  • HWK15 (6)
  • K00326 (3)
  • K00331 (6)
  • K060 (24)
  • K090 (73)
  • K1 (29)
  • K1010P (2)
  • K10M (93)
  • K10P (74)
  • K10U (62)
  • K15 (11)
  • K15U (62)
  • K20K (85)
  • K21 (30)
  • K25M (75)
  • K25P (75)
  • K2885 (14)
  • K313 (126)
  • K35P (52)
  • K420 (81)
  • K45 (27)
  • K4H (13)
  • K6 (1)
  • K68 (125)
  • K8735 (3)
  • KB1340 (18)
  • KB1345 (48)
  • KB1610 (42)
  • KB1625 (38)
  • KB1630 (49)
  • KB5610 (41)
  • KB5625 (50)
  • KB5630 (37)
  • KB9610 (60)
  • KB9640 (22)
  • KBH10 (62)
  • KBH10B (44)
  • KBH20 (72)
  • KBH20B (44)
  • KBK35 (15)
  • KC210 (56)
  • KC250 (68)
  • KC5010 (136)
  • KC5020P (13)
  • KC5025 (142)
  • KC5410 (120)
  • KC5510 (79)
  • KC5525 (47)
  • KC710 (44)
  • KC720 (107)
  • KC722 (42)
  • KC730 (122)
  • KC7310 (82)
  • KC732 (80)
  • KC8050 (107)
  • KC810 (122)
  • KC850 (126)
  • KC9010 (81)
  • KC9025 (100)
  • KC910 (114)
  • KC9105 (91)
  • KC9110 (127)
  • KC9120 (96)
  • KC9125 (106)
  • KC9125RR (1)
  • KC9140 (79)
  • KC9145 (77)
  • KC9210 (18)
  • KC9215 (79)
  • KC9225 (100)
  • KC9240 (101)
  • KC9240NEW (101)
  • KC9245 (79)
  • KC9315 (107)
  • KC9320 (120)
  • KC9325 (85)
  • KC935 (121)
  • KC950 (113)
  • KC990 (81)
  • KCD25 (29)
  • KCK05 (99)
  • KCK05B (91)
  • KCK15 (98)
  • KCK15B (104)
  • KCK20 (121)
  • KCK20B (122)
  • KCM15 (96)
  • KCM15B (89)
  • KCM25 (104)
  • KCM25B (98)
  • KCM25S (2)
  • KCM35 (92)
  • KCM35B (68)
  • KCP05 (84)
  • KCP05B (60)
  • KCP10 (105)
  • KCP10B (127)
  • KCP15 (9)
  • KCP20S (2)
  • KCP25 (106)
  • KCP25B (127)
  • KCP25C (107)
  • KCP30 (101)
  • KCP30B (82)
  • KCP40 (74)
  • KCP40B (86)
  • KCPK05 (85)
  • KCS10 (39)
  • KCS10B (104)
  • KCS25S (2)
  • KCU10 (128)
  • KCU10B (126)
  • KCU25 (128)
  • KCU25B (103)
  • KD050 (45)
  • KD081 (51)
  • KD100 (55)
  • KD120 (50)
  • KD1400 (43)
  • KD1405 (35)
  • KD1425 (58)
  • KM1 (26)
  • KMF (15)
  • KN10S (4)
  • KS15 (18)
  • KT1120 (15)
  • KT125 (50)
  • KT150 (30)
  • KT175 (72)
  • KT315 (93)
  • KT325 (52)
  • KT5020 (3)
  • KTP10 (64)
  • KTP25S (61)
  • KU10 (13)
  • KU10T (89)
  • KU25T (27)
  • KU30T (117)
  • KY1310 (42)
  • KY1320 (69)
  • KY1540 (30)
  • KY1615 (70)
  • KY2000 (43)
  • KY2100 (24)
  • KY3000 (92)
  • KY3400 (56)
  • KY3500 (77)
  • KY4000 (32)
  • KY4300 (42)
  • KY4400 (68)
  • KYHK15B (68)
  • KYK10 (28)
  • KYK25 (48)
  • KYK35 (77)
  • KYS25 (30)
  • KYS30 (34)
  • MC2 (4)
  • NL200 (33)
  • NL250 (79)
  • NL300 (68)
  • NL400 (38)
  • NL920 (55)
  • P25 (27)
  • PB100 (17)
  • PB170 (19)
  • PB250 (21)
  • PB300 (15)
  • PD100 (6)
  • PD50 (6)
  • PN120 (1)
  • PS5 (35)
  • SP0819 (65)
  • SP0A00 (1)
  • SP0PW3 (4)
  • SP3019 (47)
  • SP4019 (51)
  • SP4036 (3)
  • SP4066 (5)
  • SP4093 (3)
  • SP61EJ (1)
  • SPADAP (14)
  • SPN4W2 (8)
  • SPSREJ (1)
  • THM (62)
  • THM-X (40)
  • THMF-X (16)
  • TN10P (104)
  • TN10U (66)
  • TN15M (93)
  • TN15U (62)
  • TN2000 (67)
  • TN20K (94)
  • TN20P (96)
  • TN30M (95)
  • TN30P (74)
  • TN4000 (61)
  • TN5015 (82)
  • TN5020 (85)
  • TN5105 (54)
  • TN5120 (95)
  • TN6010 (71)
  • TN6025 (77)
  • TN7005 (58)
  • TN7010 (94)
  • TN7015 (94)
  • TN7025 (94)
  • TN7035 (84)
  • TN7105 (57)
  • TN7110 (108)
  • TN7115 (95)
  • TN7125 (88)
  • TN7135 (86)
  • TN8025 (81)
  • TTI15 (48)
  • TTM09 (12)
  • TTR (23)
  • TTR-X (8)
  • TTS (49)
  • TTX (44)
  • W00342 (14)
  • WBH10C (60)
  • WBH10P (37)
  • WBH10U (42)
  • WBH20P (55)
  • WBH25P (38)
  • WBH25U (53)
  • WBH30P (37)
  • WBK40U (18)
  • WBK45U (47)
  • WDN00U (23)
  • WDN25U (43)
  • WK05CT (85)
  • WK15CT (54)
  • WK20CT (99)
  • WM15CT (96)
  • WM25CT (96)
  • WM35CT (79)
  • WP05CT (19)
  • WP15CT (101)
  • WP20TT (4)
  • WP25CT (101)
  • WP35CT (99)
  • WS10PT (84)
  • WS25PT (81)
  • WU05PT (6)
  • WU10HT (94)
  • WU10PT (68)
  • WU25PT (64)
  • X00511 (15)
  • X00580 (15)
  • X00581 (15)
  • X00582 (15)
  • X00583 (15)
  • X00584 (15)
  • X00585 (15)
  • X00586 (15)
  • X00591 (15)
  • X00592 (15)
  • X00593 (15)
  • X00594 (15)
  • X00596 (15)
  • X00597 (15)
  • X00599 (15)
Hand Of Tool
Hand Of Tool
  • L (41)
  • N (10)
  • R (45)
Wiper Insert
Wiper Insert
  • N (144)
  • Y (48)
F Dimension
F Dimension
  • 0.0 mm (8)
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 13.0 mm (2)
  • 14.0 mm (2)
  • 17.0 mm (9)
  • 22.0 mm (15)
  • 27.0 mm (21)
  • 32.0 mm (1)
  • 35.0 mm (13)
  • 43.0 mm (2)
  • 45.0 mm (21)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (8)
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.512 in (2)
  • 0.551 in (2)
  • 0.669 in (9)
  • 0.866 in (15)
  • 1.063 in (21)
  • 1.26 in (1)
  • 1.379 in (13)
  • 1.693 in (2)
  • 1.772 in (21)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (2)
  • 32.0 mm (7)
  • 34.0 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (13)