Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

A4™ Double-Ended Cut-Off Tools - A4™ Cut Off Blades, Inserts & Tool Holders For Sale - Kennametal®

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (583)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (583)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (583)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (583)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (583)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (583)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (583)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (583)
  • M Stainless Steel (510)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (510)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (510)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (510)
  • K Cast Iron (566)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (566)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (557)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (545)
  • N Non-Ferrous Materials (518)
    • N1
      Wrought Aluminum
      (518)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (509)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (70)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (518)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (509)
    • N6
      Carbon, Graphite Composites, CFRP
      (509)
    • N7
      MMC's
      (70)
  • S High-Temp Alloys (527)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (527)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (527)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (527)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (514)
  • H Hardened Materials (305)
    • H1
      Hardened Materials 44-48 HRC
      (305)
    • H2
      Hardened Materials 48-55 HRC
      (247)
    • H3
      Hardened Materials 56-60 HRC
      (99)
    • H4
      Hardened Materials >60 HRC
      (99)
Select First Choice
  • BR (47)
  • CN (217)
  • DE (217)
  • GB (135)
  • IN (108)
  • SG (121)
  • US (254)
Applications
Applications
  • Boring Boring (379)
  • Cut-Off Cut-Off (92)
  • Deep Grooving Deep Grooving (34)
  • Face Grooving Face Grooving (440)
  • Facing Facing (4)
  • Grooving Grooving (629)
  • ID Grooving ID Grooving (396)
  • ID Thread Turning ID Thread Turning (39)
  • Multiple Direction Cutting Multiple Direction Cutting (129)
  • Plunge Turning Plunge Turning (383)
  • Profiling Profiling (158)
  • Turning Turning (124)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (321)
  • Lightly Interrupted Cut (344)
  • Smooth Cut (533)
  • Varying Depth of Cut (511)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (101)
  • 92.25 (25)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • Toolholder (120)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (93)
  • 2.0 (587)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.006 in (6)
  • 0.008 in (177)
  • 0.016 in (239)
  • 0.031 in (188)
  • 0.034 in (19)
  • 0.039 in (34)
  • 0.041 in (33)
  • 0.047 in (60)
  • 0.048 in (12)
  • 0.06 in (46)
  • 0.063 in (34)
  • 0.079 in (26)
  • 0.08 in (26)
  • 0.094 in (24)
  • 0.098 in (30)
  • 0.099 in (27)
  • 0.119 in (29)
  • 0.12 in (27)
  • 0.125 in (27)
  • 0.156 in (11)
  • 0.157 in (15)
  • 0.158 in (17)
  • 0.187 in (8)
  • 0.188 in (9)
  • 0.197 in (10)
  • 0.198 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.151 mm (6)
  • 0.2 mm (177)
  • 0.4 mm (239)
  • 0.8 mm (188)
  • 0.851 mm (19)
  • 1.0 mm (34)
  • 1.05 mm (33)
  • 1.201 mm (60)
  • 1.225 mm (12)
  • 1.5 mm (38)
  • 1.526 mm (36)
  • 1.6 mm (34)
  • 2.0 mm (26)
  • 2.025 mm (26)
  • 2.375 mm (24)
  • 2.5 mm (30)
  • 2.526 mm (27)
  • 3.0 mm (29)
  • 3.026 mm (27)
  • 3.176 mm (27)
  • 3.975 mm (11)
  • 4.0 mm (15)
  • 4.025 mm (17)
  • 4.75 mm (8)
  • 4.775 mm (9)
  • 5.0 mm (10)
  • 5.025 mm (12)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (511)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (511)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (187)
  • Lightly Interrupted Cut (210)
  • Smooth Cut (399)
  • Varying Depth of Cut (377)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (49)
  • K313 (143)
  • KB1630 (95)
  • KB5625 (86)
  • KBH20 (90)
  • KC5010 (192)
  • KC5025 (202)
  • KC9110 (134)
  • KC9125 (134)
  • KCK20 (110)
  • KCP10 (166)
  • KCP25 (168)
  • KCU10 (234)
  • KCU25 (279)
  • KD1405 (70)
  • KMS (47)
  • KT315 (121)
  • KU10 (133)
  • KU30T (86)
  • KY3500 (116)
  • KYS30 (53)
  • SP88F8 (20)
Hand Of Tool
Hand Of Tool
  • L (57)
  • R (66)
Wiper Insert
Wiper Insert
  • N (605)
F Dimension
F Dimension
  • 7.95 mm (3)
  • 12.101 mm (2)
  • 12.175 mm (2)
  • 12.226 mm (1)
  • 12.75 mm (2)
  • 12.8 mm (2)
  • 12.851 mm (2)
  • 15.925 mm (1)
  • 15.976 mm (4)
  • 16.026 mm (1)
  • 16.1 mm (1)
  • 16.2 mm (5)
  • 16.225 mm (2)
  • 19.026 mm (1)
  • 19.075 mm (3)
  • 19.1 mm (1)
  • 20.1 mm (2)
  • 20.201 mm (13)
  • 20.3 mm (2)
  • 25.201 mm (6)
  • 25.3 mm (2)
  • 25.425 mm (2)
  • 25.5 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.313 in (3)
  • 0.477 in (2)
  • 0.48 in (2)
  • 0.481 in (1)
  • 0.502 in (2)
  • 0.504 in (2)
  • 0.506 in (2)
  • 0.627 in (1)
  • 0.629 in (4)
  • 0.631 in (1)
  • 0.634 in (1)
  • 0.638 in (5)
  • 0.639 in (2)
  • 0.749 in (1)
  • 0.751 in (3)
  • 0.752 in (1)
  • 0.791 in (2)
  • 0.795 in (13)
  • 0.799 in (2)
  • 0.992 in (6)
  • 0.996 in (2)
  • 1.002 in (2)
  • 1.004 in (1)
F Dimension Min to F Dimension Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.339 in (7)
  • 1.379 in (3)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 34.0 mm (7)
  • 35.0 mm (3)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (123)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (77)
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (3)
Clamp Style
Clamp Style
  • Y (126)
Cutting Width
Cutting Width
  • 0.06 in (6)
  • 0.079 in (47)
  • 0.081 in (47)
  • 0.084 in (33)
  • 0.094 in (2)
  • 0.095 in (3)
  • 0.097 in (1)
  • 0.098 in (6)
  • 0.104 in (4)
  • 0.119 in (61)
  • 0.12 in (85)
  • 0.125 in (45)
  • 0.128 in (28)
  • 0.157 in (52)
  • 0.159 in (70)
  • 0.187 in (32)
  • 0.19 in (19)
  • 0.197 in (49)
  • 0.199 in (63)
  • 0.237 in (44)
  • 0.239 in (62)
  • 0.25 in (36)
  • 0.253 in (20)
  • 0.312 in (12)
  • 0.313 in (12)
  • 0.315 in (24)
  • 0.316 in (10)
  • 0.317 in (37)
  • 0.375 in (13)
  • 0.379 in (8)
  • 0.394 in (14)
  • 0.396 in (26)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.5 mm (6)
  • 2.0 mm (47)
  • 2.051 mm (47)
  • 2.125 mm (33)
  • 2.375 mm (2)
  • 2.401 mm (3)
  • 2.475 mm (1)
  • 2.5 mm (6)
  • 2.625 mm (4)
  • 3.0 mm (61)
  • 3.051 mm (85)
  • 3.176 mm (45)
  • 3.25 mm (28)
  • 4.0 mm (52)
  • 4.05 mm (70)
  • 4.75 mm (32)
  • 4.825 mm (19)
  • 5.0 mm (49)
  • 5.051 mm (63)
  • 6.0 mm (44)
  • 6.051 mm (62)
  • 6.351 mm (36)
  • 6.426 mm (20)
  • 7.926 mm (12)
  • 7.95 mm (12)
  • 8.0 mm (24)
  • 8.025 mm (10)
  • 8.05 mm (37)
  • 9.525 mm (13)
  • 9.625 mm (8)
  • 10.0 mm (14)
  • 10.05 mm (26)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (3)
Insert Shape
Insert Shape
  • PRISMATIC (634)
Cartridge Size
Cartridge Size
  • 50 (9)
  • 65 (11)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (3)
Insert Size
Insert Size
  • 10 (4)
  • 2 (19)
  • 3 (20)
  • 4 (17)
  • 5 (15)
  • 6 (17)
  • 8 (8)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.315 in (6)
  • 0.394 in (5)
  • 0.531 in (9)
  • 0.551 in (32)
  • 0.572 in (4)
  • 0.669 in (29)
  • 0.69 in (6)
  • 0.748 in (6)
  • 0.787 in (19)
  • 0.866 in (6)
  • 0.946 in (4)
  • 1.024 in (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 8.0 mm (6)
  • 10.0 mm (5)
  • 13.5 mm (9)
  • 14.0 mm (32)
  • 14.5 mm (4)
  • 17.0 mm (29)
  • 17.5 mm (6)
  • 19.0 mm (6)
  • 20.0 mm (19)
  • 22.0 mm (6)
  • 24.0 mm (4)
  • 26.0 mm (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 2.303 in (1)
  • 2.5 in (2)
  • 5.439 in (1)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (4)
  • 5.533 in (3)
  • 5.906 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.694 in (1)
Gage Length
Gage Length
  • 150 mm (2)
  • 170 mm (1)
  • 58.5 mm (1)
  • 63.5 mm (2)
  • 138.15 mm (1)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (4)
  • 140.55 mm (3)
  • 152.4 mm (4)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 177.8 mm (2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 1.651 mm (5)
  • 1.75 mm (4)
  • 1.901 mm (7)
  • 2.0 mm (25)
  • 2.475 mm (5)
  • 2.5 mm (2)
  • 2.575 mm (6)
  • 2.725 mm (4)
  • 2.901 mm (9)
  • 3.0 mm (12)
  • 3.301 mm (6)
  • 3.401 mm (47)
  • 3.45 mm (6)
  • 3.5 mm (31)
  • 3.526 mm (4)
  • 3.6 mm (3)
  • 3.801 mm (5)
  • 4.075 mm (5)
  • 4.101 mm (7)
  • 4.15 mm (6)
  • 4.2 mm (37)
  • 4.4 mm (6)
  • 4.5 mm (12)
  • 4.601 mm (1)
  • 4.75 mm (6)
  • 4.801 mm (5)
  • 4.9 mm (37)
  • 5.0 mm (1)
  • 5.301 mm (4)
  • 5.9 mm (6)
  • 6.0 mm (14)
  • 6.101 mm (4)
  • 6.25 mm (2)
  • 6.275 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (17)
  • 6.5 mm (6)
  • 7.301 mm (1)
  • 7.95 mm (3)
  • 8.1 mm (9)
  • 8.201 mm (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.065 in (5)
  • 0.069 in (4)
  • 0.075 in (7)
  • 0.079 in (25)
  • 0.097 in (5)
  • 0.098 in (2)
  • 0.101 in (6)
  • 0.107 in (4)
  • 0.114 in (9)
  • 0.119 in (12)
  • 0.13 in (6)
  • 0.134 in (47)
  • 0.136 in (6)
  • 0.138 in (31)
  • 0.139 in (4)
  • 0.143 in (3)
  • 0.15 in (5)
  • 0.16 in (5)
  • 0.161 in (7)
  • 0.163 in (6)
  • 0.165 in (37)
  • 0.174 in (6)
  • 0.177 in (12)
  • 0.181 in (1)
  • 0.187 in (6)
  • 0.189 in (5)
  • 0.193 in (37)
  • 0.197 in (1)
  • 0.209 in (4)
  • 0.232 in (6)
  • 0.237 in (14)
  • 0.24 in (4)
  • 0.246 in (2)
  • 0.247 in (1)
  • 0.25 in (1)
  • 0.252 in (17)
  • 0.256 in (6)
  • 0.288 in (1)
  • 0.313 in (3)
  • 0.319 in (9)
  • 0.323 in (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Insert Geometry
Shape
Shape
  • PRISMATIC (491)
Insert Seat Size
Insert Seat Size
  • 1 (6)
  • 10 (29)
  • 2 (33)
  • 2B (11)
  • 2S (7)
  • 3 (95)
  • 3S (12)
  • 4 (90)
  • 4S (7)
  • 5 (66)
  • 5S (8)
  • 6 (82)
  • 8 (45)
Cutting Tool Material
Cutting Tool Material
  • B H (95)
  • B L (90)
  • C N (120)
  • D P (70)
  • H T (121)
  • H W (587)
Back-End
Connection Type
Connection Type
  • CUTOFF BLADE (3)
  • SQUARE SHANK (120)
System Size
System Size
  • KM63XMZ (3)
Shank Height
Shank Height
  • 0.473 in (5)
  • 0.5 in (6)
  • 0.625 in (9)
  • 0.63 in (9)
  • 0.75 in (13)
  • 0.787 in (24)
  • 0.984 in (18)
  • 1.0 in (16)
  • 1.024 in (2)
  • 1.25 in (9)
  • 1.26 in (11)
  • 1.5 in (1)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 12.0 mm (5)
  • 12.701 mm (6)
  • 15.875 mm (9)
  • 16.0 mm (9)
  • 19.05 mm (13)
  • 20.0 mm (24)
  • 25.0 mm (18)
  • 25.401 mm (16)
  • 26.0 mm (2)
  • 31.75 mm (9)
  • 32.0 mm (11)
  • 38.1 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.313 in (3)
  • 0.473 in (5)
  • 0.5 in (6)
  • 0.625 in (9)
  • 0.63 in (10)
  • 0.742 in (1)
  • 0.75 in (12)
  • 0.787 in (23)
  • 0.984 in (28)
  • 1.0 in (16)
  • 1.25 in (9)
  • 1.5 in (1)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 7.95 mm (3)
  • 12.0 mm (5)
  • 12.701 mm (6)
  • 15.875 mm (9)
  • 16.0 mm (10)
  • 18.85 mm (1)
  • 19.05 mm (12)
  • 20.0 mm (23)
  • 25.0 mm (28)
  • 25.401 mm (16)
  • 31.75 mm (9)
  • 38.1 mm (1)
Shank Width Min to Shank Width Max