successfully added to cart
View Cart

Notifications

Mark all as read

Top Notch™ Grooving

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1239)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1239)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1239)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1239)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1239)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1239)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1239)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1239)
  • M Stainless Steel (1040)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1040)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1040)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1040)
  • K Cast Iron (1239)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1239)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1228)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1228)
  • N Non-Ferrous Materials (1195)
    • N1
      Wrought Aluminum
      (1187)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1033)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (203)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1195)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1041)
    • N6
      Carbon, Graphite Composites, CFRP
      (1033)
    • N7
      MMC's
      (195)
  • S High-Temp Alloys (1194)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1194)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1194)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1194)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1183)
  • H Hardened Materials (577)
    • H1
      Hardened Materials 44-48 HRC
      (577)
    • H2
      Hardened Materials 48-55 HRC
      (390)
    • H3
      Hardened Materials 56-60 HRC
      (127)
    • H4
      Hardened Materials >60 HRC
      (127)
Applications
Applications
  • Boring Boring (1087)
  • Face Grooving Face Grooving (1808)
  • Grooving Grooving (1744)
  • ID Facing ID Facing (7)
  • ID Grooving ID Grooving (1570)
  • ID Thread Turning ID Thread Turning (69)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (1508)
  • Profiling Profiling (84)
  • Threading Threading (130)
  • Turning Turning (1112)
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1245)
  • Lightly Interrupted Cut (1263)
  • Smooth Cut (1412)
  • Varying Depth of Cut (1399)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 90.0 (186)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (6)
  • Boring Bar Shank (63)
  • Toolholder (90)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (407)
  • 2.0 (1602)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.003 in (192)
  • 0.004 in (298)
  • 0.005 in (78)
  • 0.006 in (114)
  • 0.007 in (201)
  • 0.008 in (959)
  • 0.01 in (178)
  • 0.011 in (78)
  • 0.012 in (78)
  • 0.014 in (201)
  • 0.016 in (86)
  • 0.017 in (78)
  • 0.019 in (114)
  • 0.02 in (157)
  • 0.023 in (317)
  • 0.03 in (70)
  • 0.031 in (209)
  • 0.033 in (13)
  • 0.035 in (114)
  • 0.039 in (153)
  • 0.047 in (191)
  • 0.049 in (147)
  • 0.06 in (152)
  • 0.062 in (92)
  • 0.063 in (254)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (116)
  • 0.089 in (114)
  • 0.095 in (159)
  • 0.098 in (37)
  • 0.125 in (66)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.076 mm (192)
  • 0.1 mm (298)
  • 0.125 mm (78)
  • 0.151 mm (114)
  • 0.176 mm (201)
  • 0.2 mm (959)
  • 0.225 mm (78)
  • 0.25 mm (178)
  • 0.275 mm (78)
  • 0.301 mm (78)
  • 0.325 mm (201)
  • 0.351 mm (114)
  • 0.4 mm (86)
  • 0.426 mm (78)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (157)
  • 0.576 mm (317)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.826 mm (13)
  • 0.9 mm (114)
  • 1.0 mm (153)
  • 1.201 mm (191)
  • 1.25 mm (147)
  • 1.5 mm (152)
  • 1.576 mm (92)
  • 1.6 mm (254)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (116)
  • 2.25 mm (114)
  • 2.401 mm (159)
  • 2.5 mm (37)
  • 3.176 mm (66)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1635)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1635)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1047)
  • Lightly Interrupted Cut (1065)
  • Smooth Cut (1214)
  • Varying Depth of Cut (1201)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (5)
  • K2885 (146)
  • K313 (231)
  • K420 (216)
  • K4H (110)
  • K68 (303)
  • KB1345 (114)
  • KB1630 (125)
  • KB5625 (78)
  • KBH20 (42)
  • KC250 (151)
  • KC5010 (369)
  • KC5025 (393)
  • KC5410 (186)
  • KC710 (182)
  • KC720 (213)
  • KC722 (182)
  • KC730 (417)
  • KC732 (78)
  • KC810 (198)
  • KC850 (340)
  • KC910 (110)
  • KC9110 (182)
  • KC9120 (78)
  • KC9320 (182)
  • KC935 (182)
  • KC950 (182)
  • KCK20 (152)
  • KCK20B (205)
  • KCP10B (244)
  • KCP25B (290)
  • KCU10 (390)
  • KCU25 (464)
  • KD050 (40)
  • KD081 (78)
  • KD100 (97)
  • KD120 (114)
  • KD1425 (86)
  • KT175 (146)
  • KT315 (193)
  • KU10T (182)
  • KU25T (182)
  • KU30T (182)
  • KY3000 (114)
Hand Of Tool
Hand Of Tool
  • L (67)
  • R (92)
Wiper Insert
Wiper Insert
  • N (1829)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 20.326 mm (1)
  • 22.0 mm (3)
  • 25.401 mm (4)
  • 26.0 mm (2)
  • 28.576 mm (4)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 38.1 mm (4)
  • 41.301 mm (57)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 47.6 mm (56)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (49)
  • 57.151 mm (6)
  • 57.2 mm (29)
  • 60.325 mm (4)
  • 63.5 mm (22)
  • 69.851 mm (4)
  • 70.0 mm (1)
  • 76.2 mm (8)
  • 82.551 mm (4)
  • 88.9 mm (535)
  • 127.0 mm (1)
  • 139.701 mm (728)
  • 146.05 mm (3)
  • 174.601 mm (125)
  • 209.601 mm (236)
  • 222.3 mm (58)
  • 333.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.728 in (2)
  • 0.73 in (4)
  • 0.8 in (1)
  • 0.866 in (3)
  • 1.0 in (4)
  • 1.024 in (2)
  • 1.125 in (4)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.5 in (4)
  • 1.627 in (57)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.874 in (56)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.126 in (4)
  • 2.2 in (3)
  • 2.229 in (49)
  • 2.25 in (6)
  • 2.253 in (29)
  • 2.375 in (4)
  • 2.5 in (22)
  • 2.75 in (4)
  • 2.757 in (1)
  • 3.0 in (8)
  • 3.25 in (4)
  • 3.5 in (535)
  • 5.0 in (1)
  • 5.5 in (728)
  • 5.75 in (3)
  • 6.875 in (125)
  • 8.252 in (236)
  • 8.752 in (58)
  • 13.11 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (1824)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (1824)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 20.0 (3)
  • 45.0 (7)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (87)
  • S (72)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (159)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (10)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.291 in (1)
  • 1.5 in (1)
  • 1.891 in (2)
  • 2.0 in (25)
  • 2.499 in (1)
  • 2.5 in (2)
  • 2.52 in (2)
  • 3.0 in (4)
  • 3.15 in (2)
  • 3.75 in (2)
  • 3.781 in (1)
  • 3.938 in (4)
  • 4.0 in (6)
  • 4.5 in (2)
  • 5.0 in (3)
  • 5.039 in (2)
  • 6.0 in (6)
  • 6.299 in (4)
  • 7.0 in (3)
  • 7.875 in (1)
  • 8.0 in (8)
  • 9.0 in (1)
  • 10.0 in (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (10)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.801 mm (1)
  • 38.1 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (25)
  • 63.475 mm (1)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 76.2 mm (4)
  • 80.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (4)
  • 101.601 mm (6)
  • 114.301 mm (2)
  • 127.0 mm (3)
  • 128.0 mm (2)
  • 152.4 mm (6)
  • 160.0 mm (4)
  • 177.8 mm (3)
  • 200.0 mm (1)
  • 203.201 mm (8)
  • 228.601 mm (1)
  • 254.0 mm (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (9)
  • S (60)
Front-End
Clamp Style
Clamp Style
  • N (197)
Cutting Width
Cutting Width
  • 0.02 in (76)
  • 0.031 in (129)
  • 0.035 in (69)
  • 0.039 in (178)
  • 0.041 in (83)
  • 0.047 in (242)
  • 0.055 in (85)
  • 0.058 in (75)
  • 0.06 in (171)
  • 0.061 in (46)
  • 0.062 in (315)
  • 0.067 in (84)
  • 0.069 in (160)
  • 0.073 in (101)
  • 0.077 in (81)
  • 0.078 in (104)
  • 0.079 in (199)
  • 0.088 in (178)
  • 0.089 in (170)
  • 0.095 in (293)
  • 0.097 in (87)
  • 0.098 in (175)
  • 0.105 in (91)
  • 0.108 in (170)
  • 0.11 in (85)
  • 0.119 in (237)
  • 0.122 in (81)
  • 0.125 in (430)
  • 0.126 in (189)
  • 0.128 in (162)
  • 0.129 in (68)
  • 0.131 in (43)
  • 0.138 in (195)
  • 0.143 in (87)
  • 0.147 in (42)
  • 0.15 in (69)
  • 0.152 in (74)
  • 0.156 in (128)
  • 0.157 in (148)
  • 0.167 in (124)
  • 0.169 in (78)
  • 0.177 in (123)
  • 0.178 in (80)
  • 0.181 in (43)
  • 0.185 in (100)
  • 0.188 in (156)
  • 0.189 in (227)
  • 0.192 in (44)
  • 0.193 in (43)
  • 0.195 in (86)
  • 0.197 in (52)
  • 0.202 in (36)
  • 0.213 in (39)
  • 0.217 in (39)
  • 0.218 in (8)
  • 0.219 in (36)
  • 0.237 in (45)
  • 0.25 in (134)
  • 0.255 in (42)
  • 0.276 in (3)
  • 0.281 in (11)
  • 0.312 in (12)
  • 0.315 in (2)
  • 0.345 in (3)
  • 0.354 in (3)
  • 0.375 in (12)
  • 0.38 in (5)
  • 0.383 in (9)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (76)
  • 0.775 mm (117)
  • 0.8 mm (80)
  • 0.9 mm (69)
  • 1.0 mm (178)
  • 1.05 mm (83)
  • 1.201 mm (242)
  • 1.401 mm (85)
  • 1.475 mm (75)
  • 1.5 mm (171)
  • 1.55 mm (46)
  • 1.576 mm (315)
  • 1.701 mm (84)
  • 1.75 mm (160)
  • 1.826 mm (101)
  • 1.951 mm (81)
  • 1.975 mm (104)
  • 2.0 mm (199)
  • 2.2 mm (158)
  • 2.225 mm (166)
  • 2.25 mm (170)
  • 2.401 mm (293)
  • 2.475 mm (87)
  • 2.5 mm (175)
  • 2.676 mm (91)
  • 2.75 mm (170)
  • 2.801 mm (85)
  • 3.0 mm (237)
  • 3.1 mm (81)
  • 3.176 mm (430)
  • 3.2 mm (189)
  • 3.25 mm (162)
  • 3.276 mm (68)
  • 3.325 mm (43)
  • 3.5 mm (195)
  • 3.6 mm (87)
  • 3.725 mm (42)
  • 3.801 mm (69)
  • 3.85 mm (74)
  • 3.95 mm (124)
  • 3.975 mm (44)
  • 4.0 mm (148)
  • 4.25 mm (124)
  • 4.3 mm (78)
  • 4.5 mm (123)
  • 4.525 mm (80)
  • 4.601 mm (43)
  • 4.7 mm (100)
  • 4.775 mm (156)
  • 4.801 mm (227)
  • 4.875 mm (44)
  • 4.9 mm (43)
  • 4.95 mm (86)
  • 5.0 mm (52)
  • 5.125 mm (36)
  • 5.4 mm (39)
  • 5.5 mm (39)
  • 5.525 mm (8)
  • 5.575 mm (36)
  • 6.0 mm (45)
  • 6.351 mm (134)
  • 6.476 mm (42)
  • 7.0 mm (3)
  • 7.125 mm (11)
  • 7.926 mm (12)
  • 8.0 mm (2)
  • 8.75 mm (3)
  • 9.0 mm (3)
  • 9.525 mm (12)
  • 9.65 mm (5)
  • 9.726 mm (9)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • PRISMATIC (2)
  • TN-TOP NOTCH (1829)
Insert Size
Insert Size
  • 1 (5)
  • 2 (41)
  • 3 (43)
  • 4 (16)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.04 in (1)
  • 0.063 in (2)
  • 0.067 in (1)
  • 0.07 in (2)
  • 0.075 in (1)
  • 0.13 in (1)
  • 0.138 in (40)
  • 0.21 in (39)
  • 0.25 in (2)
  • 0.293 in (8)
  • 0.294 in (15)
  • 0.3 in (1)
  • 0.334 in (4)
  • 0.416 in (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.026 mm (1)
  • 1.6 mm (2)
  • 1.701 mm (1)
  • 1.776 mm (2)
  • 1.901 mm (1)
  • 3.301 mm (1)
  • 3.5 mm (40)
  • 5.325 mm (39)
  • 6.351 mm (2)
  • 7.45 mm (8)
  • 7.476 mm (15)
  • 7.625 mm (1)
  • 8.475 mm (4)
  • 10.55 mm (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.65 mm (8)
  • 0.75 mm (123)
  • 1.026 mm (221)
  • 1.05 mm (11)
  • 1.1 mm (165)
  • 1.901 mm (6)
  • 1.975 mm (8)
  • 2.551 mm (7)
  • 2.75 mm (5)
  • 2.776 mm (2)
  • 2.926 mm (130)
  • 3.801 mm (47)
  • 3.85 mm (7)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max