Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

A4™ • Double-Ended Grooving

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (636)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (636)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (636)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (636)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (636)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (636)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (636)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (636)
  • M Stainless Steel (563)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (563)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (563)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (563)
  • K Cast Iron (619)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (619)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (610)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (598)
  • N Non-Ferrous Materials (571)
    • N1
      Wrought Aluminum
      (571)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (562)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (108)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (571)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (562)
    • N6
      Carbon, Graphite Composites, CFRP
      (562)
    • N7
      MMC's
      (108)
  • S High-Temp Alloys (580)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (580)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (580)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (580)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (567)
  • H Hardened Materials (358)
    • H1
      Hardened Materials 44-48 HRC
      (358)
    • H2
      Hardened Materials 48-55 HRC
      (300)
    • H3
      Hardened Materials 56-60 HRC
      (145)
    • H4
      Hardened Materials >60 HRC
      (145)
Select First Choice
  • BR (47)
  • CN (241)
  • DE (241)
  • GB (150)
  • IN (110)
  • SG (125)
  • US (295)
Applications
Applications
  • Boring Boring (379)
  • Cut-Off Cut-Off (92)
  • Deep Grooving Deep Grooving (34)
  • Face Grooving Face Grooving (449)
  • Facing Facing (4)
  • Grooving Grooving (638)
  • ID Grooving ID Grooving (440)
  • ID Thread Turning ID Thread Turning (39)
  • Multiple Direction Cutting Multiple Direction Cutting (182)
  • Plunge Turning Plunge Turning (383)
  • Profiling Profiling (167)
  • TRN Boring TRN Boring (44)
  • Turning Turning (133)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (374)
  • Lightly Interrupted Cut (397)
  • Smooth Cut (586)
  • Varying Depth of Cut (564)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (152)
  • 92.25 (27)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (44)
  • Cutoff Support Blade A1-A3 (3)
  • Toolholder (129)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (139)
  • 2.0 (640)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.006 in (6)
  • 0.008 in (213)
  • 0.016 in (286)
  • 0.031 in (221)
  • 0.034 in (35)
  • 0.039 in (40)
  • 0.041 in (39)
  • 0.047 in (69)
  • 0.048 in (13)
  • 0.06 in (60)
  • 0.063 in (48)
  • 0.079 in (42)
  • 0.08 in (42)
  • 0.094 in (40)
  • 0.098 in (38)
  • 0.099 in (35)
  • 0.119 in (37)
  • 0.12 in (35)
  • 0.125 in (35)
  • 0.156 in (12)
  • 0.157 in (16)
  • 0.158 in (18)
  • 0.187 in (8)
  • 0.188 in (9)
  • 0.197 in (10)
  • 0.198 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.151 mm (6)
  • 0.2 mm (213)
  • 0.4 mm (286)
  • 0.8 mm (221)
  • 0.851 mm (35)
  • 1.0 mm (40)
  • 1.05 mm (39)
  • 1.201 mm (69)
  • 1.225 mm (13)
  • 1.5 mm (52)
  • 1.526 mm (50)
  • 1.6 mm (48)
  • 2.0 mm (42)
  • 2.025 mm (42)
  • 2.375 mm (40)
  • 2.5 mm (38)
  • 2.526 mm (35)
  • 3.0 mm (37)
  • 3.026 mm (35)
  • 3.176 mm (35)
  • 3.975 mm (12)
  • 4.0 mm (16)
  • 4.025 mm (18)
  • 4.75 mm (8)
  • 4.775 mm (9)
  • 5.0 mm (10)
  • 5.025 mm (12)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (511)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (511)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (187)
  • Lightly Interrupted Cut (210)
  • Smooth Cut (399)
  • Varying Depth of Cut (377)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (74)
  • K313 (196)
  • KB1630 (141)
  • KB5625 (132)
  • KBH20 (136)
  • KC5010 (245)
  • KC5025 (255)
  • KC9110 (187)
  • KC9125 (187)
  • KCK20 (157)
  • KCP10 (219)
  • KCP25 (221)
  • KCU10 (287)
  • KCU25 (332)
  • KD1405 (108)
  • KMS (69)
  • KT315 (173)
  • KU10 (186)
  • KU30T (132)
  • KY3500 (163)
  • KYS30 (70)
  • SP88F8 (28)
Wiper Insert
Wiper Insert
  • N (658)
F Dimension
F Dimension
  • 7.95 mm (3)
  • 12.101 mm (2)
  • 12.175 mm (2)
  • 12.226 mm (1)
  • 12.75 mm (2)
  • 12.8 mm (4)
  • 12.851 mm (2)
  • 12.9 mm (2)
  • 13.0 mm (7)
  • 15.925 mm (1)
  • 15.976 mm (4)
  • 16.026 mm (1)
  • 16.1 mm (1)
  • 16.2 mm (5)
  • 16.225 mm (2)
  • 16.875 mm (5)
  • 17.0 mm (6)
  • 19.026 mm (1)
  • 19.075 mm (3)
  • 19.1 mm (1)
  • 20.1 mm (2)
  • 20.201 mm (13)
  • 20.3 mm (2)
  • 21.776 mm (1)
  • 21.8 mm (1)
  • 22.0 mm (4)
  • 25.201 mm (6)
  • 25.3 mm (2)
  • 25.401 mm (1)
  • 25.425 mm (2)
  • 25.5 mm (1)
  • 25.776 mm (1)
  • 25.875 mm (1)
  • 26.0 mm (2)
  • 27.901 mm (1)
  • 29.875 mm (3)
  • 30.0 mm (8)
  • 30.401 mm (1)
  • 30.8 mm (1)
  • 33.1 mm (1)
  • 34.875 mm (1)
  • 35.1 mm (1)
  • 35.4 mm (1)
  • 38.901 mm (1)
  • 39.1 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.313 in (3)
  • 0.477 in (2)
  • 0.48 in (2)
  • 0.481 in (1)
  • 0.502 in (2)
  • 0.504 in (4)
  • 0.506 in (2)
  • 0.508 in (2)
  • 0.512 in (7)
  • 0.627 in (1)
  • 0.629 in (4)
  • 0.631 in (1)
  • 0.634 in (1)
  • 0.638 in (5)
  • 0.639 in (2)
  • 0.664 in (5)
  • 0.669 in (6)
  • 0.749 in (1)
  • 0.751 in (3)
  • 0.752 in (1)
  • 0.791 in (2)
  • 0.795 in (13)
  • 0.799 in (2)
  • 0.857 in (1)
  • 0.858 in (1)
  • 0.866 in (4)
  • 0.992 in (6)
  • 0.996 in (2)
  • 1.0 in (1)
  • 1.002 in (2)
  • 1.004 in (1)
  • 1.016 in (1)
  • 1.02 in (1)
  • 1.024 in (2)
  • 1.098 in (1)
  • 1.176 in (3)
  • 1.181 in (8)
  • 1.197 in (1)
  • 1.213 in (1)
  • 1.303 in (1)
  • 1.373 in (1)
  • 1.383 in (1)
  • 1.395 in (1)
  • 1.532 in (1)
  • 1.539 in (1)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 25.0 mm (11)
  • 32.0 mm (11)
  • 40.0 mm (6)
  • 44.0 mm (4)
  • 52.0 mm (11)
  • 65.0 mm (1)
  • 70.0 mm (3)
  • 90.0 mm (2)
  • 120.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.984 in (11)
  • 1.26 in (11)
  • 1.575 in (6)
  • 1.732 in (4)
  • 2.047 in (11)
  • 2.559 in (1)
  • 2.757 in (3)
  • 3.543 in (2)
  • 4.724 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.339 in (7)
  • 1.379 in (3)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 34.0 mm (7)
  • 35.0 mm (3)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (123)
  • S (53)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (14)
  • NEUTRAL (ZERO) (57)
  • POSITIVE-ZERO (77)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (11)
  • 1.969 in (7)
  • 1.98 in (4)
  • 2.511 in (1)
  • 2.52 in (9)
  • 3.15 in (11)
  • 3.938 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (11)
  • 50.0 mm (7)
  • 50.301 mm (4)
  • 63.75 mm (1)
  • 64.0 mm (9)
  • 80.0 mm (11)
  • 100.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (44)
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (3)
Clamp Style
Clamp Style
  • Y (179)
Cutting Width
Cutting Width
  • 0.06 in (6)
  • 0.079 in (53)
  • 0.081 in (53)
  • 0.084 in (39)
  • 0.094 in (2)
  • 0.095 in (3)
  • 0.097 in (1)
  • 0.098 in (6)
  • 0.104 in (4)
  • 0.119 in (75)
  • 0.12 in (99)
  • 0.125 in (59)
  • 0.128 in (42)
  • 0.157 in (68)
  • 0.159 in (86)
  • 0.187 in (48)
  • 0.19 in (35)
  • 0.197 in (57)
  • 0.199 in (71)
  • 0.237 in (52)
  • 0.239 in (70)
  • 0.25 in (44)
  • 0.253 in (28)
  • 0.312 in (13)
  • 0.313 in (13)
  • 0.315 in (25)
  • 0.316 in (11)
  • 0.317 in (38)
  • 0.375 in (13)
  • 0.379 in (8)
  • 0.394 in (14)
  • 0.396 in (26)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.5 mm (6)
  • 2.0 mm (53)
  • 2.051 mm (53)
  • 2.125 mm (39)
  • 2.375 mm (2)
  • 2.401 mm (3)
  • 2.475 mm (1)
  • 2.5 mm (6)
  • 2.625 mm (4)
  • 3.0 mm (75)
  • 3.051 mm (99)
  • 3.176 mm (59)
  • 3.25 mm (42)
  • 4.0 mm (68)
  • 4.05 mm (86)
  • 4.75 mm (48)
  • 4.825 mm (35)
  • 5.0 mm (57)
  • 5.051 mm (71)
  • 6.0 mm (52)
  • 6.051 mm (70)
  • 6.351 mm (44)
  • 6.426 mm (28)
  • 7.926 mm (13)
  • 7.95 mm (13)
  • 8.0 mm (25)
  • 8.025 mm (11)
  • 8.05 mm (38)
  • 9.525 mm (13)
  • 9.625 mm (8)
  • 10.0 mm (14)
  • 10.05 mm (26)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (3)
Insert Shape
Insert Shape
  • PRISMATIC (687)
Cartridge Size
Cartridge Size
  • 50 (9)
  • 65 (11)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (3)
Insert Size
Insert Size
  • 10 (4)
  • 2 (25)
  • 3 (34)
  • 4 (33)
  • 5 (23)
  • 6 (25)
  • 8 (9)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (3)
  • 0.276 in (13)
  • 0.315 in (6)
  • 0.354 in (1)
  • 0.394 in (16)
  • 0.433 in (3)
  • 0.473 in (6)
  • 0.531 in (9)
  • 0.551 in (32)
  • 0.572 in (4)
  • 0.63 in (16)
  • 0.669 in (29)
  • 0.69 in (6)
  • 0.748 in (6)
  • 0.787 in (19)
  • 0.866 in (6)
  • 0.946 in (4)
  • 1.024 in (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (3)
  • 7.0 mm (13)
  • 8.0 mm (6)
  • 9.0 mm (1)
  • 10.0 mm (16)
  • 11.0 mm (3)
  • 12.0 mm (6)
  • 13.5 mm (9)
  • 14.0 mm (32)
  • 14.5 mm (4)
  • 16.0 mm (16)
  • 17.0 mm (29)
  • 17.5 mm (6)
  • 19.0 mm (6)
  • 20.0 mm (19)
  • 22.0 mm (6)
  • 24.0 mm (4)
  • 26.0 mm (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 2.303 in (1)
  • 2.5 in (2)
  • 5.439 in (1)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (4)
  • 5.533 in (3)
  • 5.906 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.694 in (1)
Gage Length
Gage Length
  • 150 mm (2)
  • 170 mm (1)
  • 58.5 mm (1)
  • 63.5 mm (2)
  • 138.15 mm (1)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (4)
  • 140.55 mm (3)
  • 152.4 mm (4)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 177.8 mm (2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 1.651 mm (5)
  • 1.75 mm (4)
  • 1.901 mm (7)
  • 2.0 mm (25)
  • 2.475 mm (5)
  • 2.5 mm (2)
  • 2.575 mm (6)
  • 2.725 mm (4)
  • 2.901 mm (9)
  • 3.0 mm (12)
  • 3.301 mm (6)
  • 3.401 mm (47)
  • 3.45 mm (6)
  • 3.5 mm (31)
  • 3.526 mm (4)
  • 3.6 mm (3)
  • 3.801 mm (5)
  • 4.075 mm (5)
  • 4.101 mm (7)
  • 4.15 mm (6)
  • 4.2 mm (37)
  • 4.4 mm (6)
  • 4.5 mm (12)
  • 4.601 mm (1)
  • 4.75 mm (6)
  • 4.801 mm (5)
  • 4.9 mm (37)
  • 5.0 mm (1)
  • 5.301 mm (4)
  • 5.9 mm (6)
  • 6.0 mm (14)
  • 6.101 mm (4)
  • 6.25 mm (2)
  • 6.275 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (17)
  • 6.5 mm (6)
  • 7.301 mm (1)
  • 7.95 mm (3)
  • 8.1 mm (9)
  • 8.201 mm (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.065 in (5)
  • 0.069 in (4)
  • 0.075 in (7)
  • 0.079 in (25)
  • 0.097 in (5)
  • 0.098 in (2)
  • 0.101 in (6)
  • 0.107 in (4)
  • 0.114 in (9)
  • 0.119 in (12)
  • 0.13 in (6)
  • 0.134 in (47)
  • 0.136 in (6)
  • 0.138 in (31)
  • 0.139 in (4)
  • 0.143 in (3)
  • 0.15 in (5)
  • 0.16 in (5)
  • 0.161 in (7)
  • 0.163 in (6)
  • 0.165 in (37)
  • 0.174 in (6)
  • 0.177 in (12)
  • 0.181 in (1)